Series 10 SCU
Eaton's Series 10 Steering Control Unit (SCU) facilitates hydraulic fluid flow like no other unit on the market. This highly-engineered product is the ultimate SCU for mid-range flow applications.
Features
Benefits:
The new Series 10 SCU has an unprecedented, continuous pressure rating of 275 bar (4000 psi), making it ideal for heavy-duty equipment, such as construction and agricultural machinery. Its high-pressure rating reduces overall equipment costs, since smaller cylinder sizes can be assigned into the system. The new Series 10 incorporates proven Eaton technologies including Q-Amp, Wide Angle, VersaSteer and Two-Speed steering. An internal, balanced architecture and a widewalled sleeve that is 40% thicker than standard designs offer increased performance during transient pressure conditions.
- Open Center
- Power Beyond
- Closed Center
- Load Sensing
- Integral Valves
- Q-Amp
- 2-Speed
- Dual Displacement
- Versa Steer
- Wide Angle
Cylinder Damping
Benefits:
The new Series 10 SCU has an unprecedented, continuous pressure rating of 275 bar (4000 psi), making it ideal for heavy-duty equipment, such as construction and agricultural machinery. Its high-pressure rating reduces overall equipment costs, since smaller cylinder sizes can be assigned into the system. The new Series 10 incorporates proven Eaton technologies including Q-Amp, Wide Angle, VersaSteer and Two-Speed steering. An internal, balanced architecture and a widewalled sleeve that is 40% thicker than standard designs offer increased performance during transient pressure conditions.
- Construction Machinery
- Agriculture Machinery
- Heavy-Duty Equipment
- Marine
- Forestry Machinery
- Mining Equipment
- Max System Pressure 270 bar (4000 PSI)
- Max Back Pressure 21 bar (305 PSI)
- Rated Flow
- Low 7.6 – 15 l/min (2-4 GPM)
- Medium 15-30l/min (4-8 GPM)
- High 30-61 l/min (8-16 GPM)
- Low (With Q-Amp) 8-19 l/min (2-5 GPM)
- Medium (With Q-Amp) 19-38 l/min (5-10 GPM)
- High (with Q-Amp) 38-76 l/min (10-12 GPM)
- Max System Operating Temperature 93°C (200° F)
- Max Differential Between Steering Unit and System Temperature 28°C/50°F
- Input Torque
- Powered – 1.1-2.8 Nm @ 6.9 bar back pressure (10-25 lb-in @ 100 PSI back pressure)
- Non Powered 136 Nm (100 lb-ft)
- Fluid - See Eaton Technical Bulletin 3-401
- Recommended Filtration - ISO 18/13 cleanliness level
For drawings, pricing and leadtimes, please contact your local distributor
