Chemical Hoses
Common applications include:
- Transfer of acids, chemicals, solvents, and petroleum products;
- Loading and unloading, pumping, suction, or gravity flow discharge
- Suction and discharge of chemicals, and solvents
- In-plant transfer of chemicals, alcohols, acids and petroleum
- Spray pesticides, fertilizers and paint
Addresses these engineering challenges:
- Safer operation
- Longer hose life
- Full range of sizes and styles
Product Features
- Every chemical hose features permanent branding for quick and easy identification
- Unique design permits easy, safe handling of the hose
- 4:1 safety factor on select hoses (burst: working pressure), exceptional aging, weathering and heat resistance result in safer operation and longer hose life
Technical Information
Suction & Discharge Hoses:
H0060 - ARMORCAT Corrugated Petrochemical Hose
- Tube: UHMW–PE FDA-approved material
- Reinforcement: 2-wire braid, dual stainless steel static wire
- Cover: Corrugated EPDM
- Temp: -40°C to +121°C, (-40°F to +250°F) *Intermittent
- Pressure: 35 bar / 500 psi
H0554 - ARMORCAT Petrochemical Hose
- Tube: UHMW-PE FDA-approved material
- Reinforcement: 2-wire braid, dual stainless steel static wire,
- and helical wire
- Cover: EPDM
- Temp: -40°C to +121°C, (-40°F to +250°F) *Intermittent
- Pressure: 35 bar / 500 psi
H0599 - CHEMCAT Corrugated Petrochemical Hose
- Tube: UHMW–PE FDA-approved material
- Reinforcement: 2-ply fiber with dual helical wire
- Cover: Corrugated EPDM
- Temp: -40°C to +121°C, (-40°F to +250°F) *Intermittent
- Pressure: 12,1--20,7 bar / 175-300 psi
H0523 - CHEMCAT Petrochemical Hose
- Tube: UHMW-PE FDA-approved material
- Reinforcement: 2-ply fiber and dual helical wires
- Cover: EPDM
- Temp: -40°C to +121°C, (-40°F to +250°F) *Intermittent
- Pressure: 12,1-20,7 bar / 175-300 psi
EHC005 - Corrugated UHMW-PE S & D Hose
- Tube: UHMW-PE F DA-approved material
- Reinforcement: High-tensile synthetic textile, steel helical wire
- and anti-static copper wire
- Cover: Corrugated EPDM
- Temp: -40°C to +80°C, (-40°F to +176°F)
- Pressure: 10,5 bar / 150 psi
EHC004 - UHMW-PE S & D Hose
- Tube: UHMW-PE FDA-approved material
- Reinforcement: High-tensile synthetic textile, steel helical wire
- and anti-static copper wire
- Cover: EPDM rubber
- Temp: -40°C to +80°C, (-40°F to +176°F)
- Pressure: 10,5 bar / 150 psi
H0661 - COUGAR Corrugated Hose
- Tube: CPE
- Reinforcement: 2-ply fiber with helical wire
- Cover: EPDM
- Temp: -43°C to +135°C, (-45°F to +275°F)
- Pressure: 12,1 bar / 175 psi
H8359 - PANTHER Chemical Hose
- Tube: XLPE
- Reinforcement: 2-ply fiber with helical wire
- Cover: EPDM
- Temp: -43°C to +66°C, (-45°F to +150°F)
- Pressure: 12,1-17,2 bar / 175-250 psi
H0615 - Corrugated Green CROSS-LINKED Hose/p>
- Tube: XLPE
- Reinforcement: 2-ply fiber with helical wire
- Cover: Corrugated EPDM
- Temp: -43°C to +66°C, (-45°F to +150°F)
- Pressure: 12,1-17,2 bar / 175-250 psi
H0378 - Green CROSS-LINKED Hose
- Tube: XLPE
- Reinforcement: 2-ply fiber, with helical wire
- Cover: EPDM
- Temp: -43°C to +66°C, (-45°F to +150°F)
- Pressure: 12,1-17,2 bar / 175-250 psi
EHC002 - Flat Corrugated Chemical S & D Hose
- Tube: PE blend
- Reinforcement: High-tensile synthetic textile, dual steel helical wire
- and anti-static copper wire
- Cover: Flat corrugated EPDM
- Temp: -40°C to +80°C, (-40°F to +176°F)
- Pressure: 10,5 bar / 150 psi
EHC001 - Chemical S & D Hose
- Tube: PE blend
- Reinforcement: High-tensile synthetic textile, dual steel helical wire
- and anti-static copper wire
- Cover: EPDM
- Temp: -40°C to +80°C, (-40°F to +176°F)
- Pressure: 10,5 bar / 150 psi
H0345 - TIGER Chemical S & D Hose
- Tube: EPDM
- Reinforcement: 2-ply fiber with helical wire
- Cover: EPDM
- Temp: -43°C to +82°C, (-45°F to +180°F)
- Pressure: 10,5 bar / 150 psi
Discharge:
H9699 - ALLEYCAT Hot Liquid Hoses
- Tube: EPDM
- Reinforcement: 2-wire braid with anti-static wire
- Cover: EPDM
- Temp: -40°C to +149°C, (-40°F to +300°F)
- Pressure: 41 bar / 600 psi
H0346 - LEOPARD Chemical Discharge Hose
- Tube: EPDM
- Reinforcement: 2-ply fiber
- Cover: EPDM
- Temp: -43°C to +82°C, (-45°F to +180°F)
- Pressure: 7,0-10,5 bar / 100-150 psi
Specialty Hoses:
H1941 & H1942 - NYALL Hose
- Tube: Nylon
- Reinforcement: 1- or 2-fiber braid
- Cover: Neoprene or Vinyl Nitrile
- Temp: -34°C to +71°C, (+30°F to +160°F)
- Pressure: 35-52 bar / 500-750 psi
H1561 - CHEMFORCE Hose
- Tube: PVC/Polyurethane blend
- Reinforcement: 4-spiral fiber
- Cover: PVC
- Temp: -9°C to +71°C, (+15°F to +160°F)
- Pressure: 41 bar / 600 psi
Featured Literature

Eaton Industrial Hose – Master Catalog (Global)
Eaton’s master catalog for all industrial hoses sold globally.
Eaton Industrial Hose – Master Catalog (NA)
Eaton’s master catalog for all industrial hoses sold in North America only.

Videos
Additional Information
Supplier Crimp Specs are available for some of Eaton's Industrial Hoses. To access this crimp solutions database, first select the hose you are interested in (on this page) and then click on "Supplier Crimp Specs" just right of the product image. Once in the tool, enter the wall thickness of your hose and the database will provide the fitting and ferrule or sleeve solutions along with the applicable crimp diameter.Contact Me
Please use the link below to submit your request, questions or comments. We look forward to hearing from you and an Eaton representative will contact you shortly.
Contact me |
To locate a local distributor, visit Eaton’s Distributor Locator.
NOTE: Due to a backlog in our technical support department and our continuous effort to improve our customers’ experience, please refer to your nearest distributor with any technical questions. You can locate the nearest Eaton Hydraulics distributor by clicking on the link above. Thank you for your understanding.