168974

General specifications

Product Name	Eaton Moeller® series PKE System-protective circuit-breaker
Catalog Number	168974
EAN	4015081654659
Product Length/Depth	187 mm
Product Height	162 mm
Product Width	55 mm
Product Weight	1.469 kg
Certifications	IEC/EN 60947 VDE 0660
Catalog Notes	This is a product for Environment A (Industrial). In environment B (household) this device may cause undesirable radio interference. In this case the user may be obliged to take appropriate measures.

Especificaciones del producto

Features	Complete device with protection unit
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
Fitted with:	Standard knob
Operating frequency	60 Operations/h
Pollution degree	3
Mounting Method	DIN rail (top hat rail) mounting optional
Climatic proofing	Damp heat, cyclic, to IEC 60068-2-30 Damp heat, constant, to IEC 60068-2-78
Actuator type	Turn button
Adjustment range short-term delayed short-circuit release - max	150 A
Adjustment range short-term delayed short-circuit release - min	150 A
Adjustment range undelayed short-circuit release - max	1008 A
Adjustment range undelayed short-circuit release - min	1008 A
Ambient operating temperature - max	55 °C
Ambient operating temperature - min	-25 °C
Ambient operating temperature (enclosed) - max	40 °C
Ambient operating temperature (enclosed) - min	-25 °C
Ambient storage temperature - max	80 °C
Ambient storage temperature - min	-40 °C
Equipment heat dissipation, current-dependent Pvid	21.6 W
Heat dissipation capacity Pdiss	0 W
Heat dissipation per pole, current-dependent Pvid	7.2 W
Rated impulse withstand voltage (Uimp)	6000 V AC
Altitude	Max. 2000 m
Device construction	Built-in device fixed built-in technique
Connection	Screw terminals
Electrical connection type of main circuit	Screw connection
Current flow times - min	900 (Class 15) AC-4 cycle operation, Main conducting paths 500 (Class 5) AC-4 cycle operation, Main conducting paths For all combinations with an SWD activation, you need not adhere to the minimum current flow times and minimum cut-out periods. Note: Going below the minimum current flow time can cause overheating of the load (motor). 700 (Class 10) AC-4 cycle operation, Main conducting paths 1000 (Class 20) AC-4 cycle operation, Main conducting paths
Lifespan, mechanical	30,000 Operations (Main conducting paths)
Overvoltage category	III
Cut-out periods - min	≤ 500 ms, main conducting paths, AC-4 cycle operation
Degree of protection	IP20 Terminals: IP00
Number of poles	Three-pole
Lifespan, electrical	50,000 operations (at 400V, AC-3)
Shock resistance	15 g, Mechanical, According to IEC/EN 60068-2-27, Half-sinusoidal shock 10 ms
Functions	Line and cable protection Overload release System protection
Position of connection for main current circuit	Other
Number of auxiliary contacts (change-over contacts)	0
Number of auxiliary contacts (normally closed contacts)	0
Number of auxiliary contacts (normally open contacts)	0
Overload release current setting - max	65 A
Overload release current setting - min	30 A
Rated frequency - max	60 Hz
Rated frequency - min	50 Hz
Rated operational voltage (Ue) - max	690 V
Rated operational voltage (Ue) - min	690 V
Rated operational current for specified heat dissipation (In)	65 A
Rated uninterrupted current (Iu)	65 A
Static heat dissipation, non-current-dependent Pvs	0 W
Stripping length (main cable)	14 mm
Product category	Circuit-breaker PKE
Protection	Finger and back-of-hand proof, Protection against direct contact when actuated from front (EN 50274)
Rated short-circuit breaking capacity Icu at 400 V AC	50 kA
Rated short-circuit breaking capacity Ics at 400 V AC	12 kA
Rated short-circuit breaking capacity Icu at 440 V AC	45 kA
Rated short-circuit breaking capacity Ics at 440 V AC	11 kA
Rated short-circuit breaking capacity Icu at 500 V AC	15 kA
Rated short-circuit breaking capacity Ics at 500 V AC	3 kA
Rated short-circuit breaking capacity Icu at 690 V AC	5 kA
Rated short-circuit breaking capacity Ics at 690 V AC	1 kA
Suitable for	DIN rail (top hat rail) mounting
Short-circuit release	Trip block adjustable 5 - 8 x Ir Basic device fixed 15.5 x Iu, Trip Blocks ± 20% tolerance, Trip blocks Delayed approx. 60 ms, Trip blocks
Terminal capacity (solid)	2 x (0.75 - 16) mm² 1 x (0.75 - 16) mm²
Rated operational current (Ie)	65 A
Temperature compensation	-5 - 40 °C to IEC/EN 60947, VDE 0660 -25 - 55 °C, Operating range
Tightening torque	1 Nm, Screw terminals, Control circuit cables 3.3 Nm, Screw terminals, Main cable
Terminal capacity (flexible with ferrule)	2 x (0.75 - 25) mm², ferrule to DIN 46228 1 x (0.75 - 35) mm², ferrule to DIN 46228
Power loss	21.6 W
Resistance per pole	1.6 mΩ

General specifications

Especificaciones del producto

Exportar especificación del producto

Characteristic curve

Declarations of conformity

Dibujos

eCAD model

Folletos

Instrucciones de instalación

mCAD model

Notas de ventas

Videos de instalación

168974

General specifications

Especificaciones del producto

Exportar especificación del producto

Characteristic curve

Declarations of conformity

Dibujos

eCAD model

Folletos

Instrucciones de instalación

mCAD model

Notas de ventas

Videos de instalación

HABLEMOS SOBRE TEMAS DE GRAN IMPACTO