104481 | Eaton Moeller® series DILMF contactor for semiconductor industries

General specifications

Product Name	Eaton Moeller® series DILMF contactor for semiconductor industries
Catalog Number	104481
EAN	4015081042982
Product Length/Depth	160 mm
Product Height	170 mm
Product Width	90 mm
Product Weight	2.26 kg
Certifications	CSA Class No.: 2411-03, 3211-04 UL File No.: E29096 UL Category Control No.: NLDX UL UL 60947-4-1 CSA CE CSA File No.: 012528 CSA-C22.2 No. 60947-4-1-14 IEC/EN 60947-4-1
Catalog Notes	Also tested according to AC-3e.
Model Code	DILMF115(RAC240)

Vlastnosti a funkce

Fitted with:	Built-in suppressor circuit
Number of poles	Three-pole
Operating mode	Operating mechanism adjustable from 50 Hz to 400 Hz.

Obecné

Application	Contactors for Semiconductor Industries acc. to SEMI F47
Connection	Screw terminals
Overvoltage category	III
Pollution degree	3
Product category	Contactors
Resistance per pole	0.56 mΩ
Suitable for	SEMI F47, Magnet systems Also motors with efficiency class IE3
Utilization category	AC-3: Normal AC induction motors: starting, switch off during running AC-4: Normal AC induction motors: starting, plugging, reversing, inching AC-1: Non-inductive or slightly inductive loads, resistance furnaces
Voltage type	AC

Klimatické podmínky a podmínky prostředí

Ambient operating temperature - min	-25 °C
Ambient operating temperature - max	60 °C
Ambient operating temperature (enclosed) - min	-25 °C
Ambient operating temperature (enclosed) - max	40 °C
Ambient storage temperature - min	-40 °C
Ambient storage temperature - max	80 °C

Elektromagnetická kompatibilita

Emitted interference	According to EN 60947-1
Interference immunity	According to EN 60947-1

Jmenovité elektrické charakteristiky

Rated operational current (Ie) at AC-1, 380 V, 400 V, 415 V	130 A
Rated operational current (Ie) at AC-3, 220 V, 230 V, 240 V	115 A
Rated operational current (Ie) at AC-3, 380 V, 400 V, 415 V	115 A
Rated operational current (Ie) at AC-3, 440 V	115 A
Rated operational current (Ie) at AC-3, 500 V	115 A
Rated operational current (Ie) at AC-3, 660 V, 690 V	93 A
Rated operational current (Ie) at AC-4, 220 V, 230 V, 240 V	55 A
Rated operational current (Ie) at AC-4, 440 V	55 A
Rated operational current (Ie) at AC-4, 500 V	55 A
Rated operational current (Ie) at AC-4, 660 V, 690 V	45 A
Rated insulation voltage (Ui)	690 V
Rated operational power at AC-3, 240 V, 50 Hz	40 kW
Rated operational power at AC-3, 415 V, 50 Hz	70 kW
Rated operational power at AC-3, 415 V, 50 Hz	70 kW
Rated operational power at AC-4, 220/230 V, 50 Hz	17 kW
Rated operational power at AC-4, 240 V, 50 Hz	19 kW
Rated operational power at AC-4, 415 V, 50 Hz	33 kW
Rated operational power at AC-4, 440 V, 50 Hz	35 kW
Rated operational power at AC-4, 500 V, 50 Hz	40 kW
Rated operational power at AC-4, 660/690 V, 50 Hz	43 kW

Jmenovitá zkratová odolnost

Short-circuit current rating (basic rating)	10 kA, SCCR (UL/CSA) 600 A, max. Fuse, SCCR (UL/CSA) 600 A, max. CB, SCCR (UL/CSA)
Short-circuit current rating (high fault at 480 V)	30/100 kA, Fuse, SCCR (UL/CSA) 250 A, max. CB, SCCR (UL/CSA) 65 kA, CB, SCCR (UL/CSA) 300/300 A, Class J, max. Fuse, SCCR (UL/CSA)
Short-circuit current rating (high fault at 600 V)	30 kA, CB, SCCR (UL/CSA) 30/100 kA, Fuse, SCCR (UL/CSA) 350 A, max. CB, SCCR (UL/CSA) 300/300 A, Class J, max. Fuse, SCCR (UL/CSA)

Jmenovitý tepelný proud

Conventional thermal current Ith (1-pole, enclosed)	285 A
Conventional thermal current Ith (3-pole, enclosed)	115 A
Conventional thermal current Ith of main contacts (1-pole, open)	325 A

Spínací výkon

Switching capacity (main contacts, general use)

180 A, Maximum motor rating (UL/CSA)

Spínací doba

Switching time (AC operated, make contacts, closing delay) - max	40 ms
Switching time (AC operated, make contacts, opening delay) - max	40 ms

Magnetový systém

Drop-out voltage	AC operated: 0.5 - 0.2 x UC, AC operated
Duty factor	100 %
Pick-up voltage	0.8 - 1.15 V AC x Uc
Power consumption, pick-up, 50 Hz	180 VA, Dual-frequency coil in a cold state and 1.0 x Us, at 50 Hz
Power consumption, sealing, 50 Hz	2.3 W, Dual-frequency coil in a cold state and 1.0 x Us, at 50 Hz 3.1 VA, Dual-frequency coil in a cold state and 1.0 x Us, at 50 Hz
Rated control supply voltage (Us) at AC, 50 Hz - min	190 V
Rated control supply voltage (Us) at AC, 50 Hz - max	240 V
Rated control supply voltage (Us) at AC, 60 Hz - min	190 V
Rated control supply voltage (Us) at AC, 60 Hz - max	240 V
Rated control supply voltage (Us) at DC - min	0 V
Rated control supply voltage (Us) at DC - max	0 V

Jmenovité charakteristiky motoru

Assigned motor power at 115/120 V, 60 Hz, 1-phase	10 HP
Assigned motor power at 200/208 V, 60 Hz, 3-phase	40 HP
Assigned motor power at 230/240 V, 60 Hz, 1-phase	25 HP
Assigned motor power at 230/240 V, 60 Hz, 3-phase	50 HP
Assigned motor power at 460/480 V, 60 Hz, 3-phase	100 HP
Assigned motor power at 575/600 V, 60 Hz, 3-phase	100 HP

Kontakty

Number of auxiliary contacts (normally closed contacts)	0
Number of auxiliary contacts (normally open contacts)	0

Speciální charakteristiky

Special purpose rating of ballast electrical discharge lamps	160 A (600V 60Hz 3phase, 347V 60Hz 1phase) 160 A (480V 60Hz 3phase, 277V 60Hz 1phase)
Special purpose rating of definite purpose rating	690 A, LRA 480 V 60 Hz 3-ph, 100,000 cycles acc. to UL 1995, (UL/CSA) 115 A, FLA 480 V 60 Hz 3-ph, 100,000 cycles acc. to UL 1995, (UL/CSA)
Special purpose rating of elevator control	30 HP, 200 V 60 Hz 3-ph, (UL/CSA) 75 HP, 480 V 60 Hz 3-ph, (UL/CSA) 96 A, 480 V 60 Hz 3-ph, (UL/CSA) 99 A, 600 V 60 Hz 3-ph, (UL/CSA) 92 A, 200 V 60 Hz 3-ph, (UL/CSA) 100 HP, 600 V 60 Hz 3-ph, (UL/CSA) 40 HP, 240 V 60 Hz 3-ph, (UL/CSA) 104 A, 240 V 60 Hz 3-ph, (UL/CSA)
Special purpose rating of refrigeration control (CSA only)	84 A, FLA 600 V 60 Hz 3phase; (CSA) 540 A, LRA 480 V 60 Hz 3phase; (CSA) 540 A, LRA 600 V 60 Hz 3phase; (CSA) 84 A, FLA 480 V 60 Hz 3phase; (CSA)
Special purpose rating of resistance air heating	160 A, 600 V 60 Hz 3phase, 347 V 60 Hz 1phase, (UL/CSA) 160 A, 480 V 60 Hz 3phase, 277 V 60 Hz 1phase, (UL/CSA)
Special purpose rating of tungsten incandescent lamps	160 A, 480 V 60 Hz 3phase, 277 V 60 Hz 1phase, (UL/CSA) 160 A, 600 V 60 Hz 3phase, 347 V 60 Hz 1phase, (UL/CSA)

Ověření návrhu

Equipment heat dissipation, current-dependent Pvid	18.9 W
Heat dissipation capacity Pdiss	0 W
Heat dissipation per pole, current-dependent Pvid	6.3 W
Rated operational current for specified heat dissipation (In)	115 A
Static heat dissipation, non-current-dependent Pvs	2.3 W
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Navrženo pro vzájemnou spolupráci

Objevte další produkty a příslušenství společnosti Eaton vyvinuté pro zlepšení tohoto produktu.

104481
Kód modelu: DILMF115(RAC240)

General specifications

Vlastnosti a funkce

Obecné

Klimatické podmínky a podmínky prostředí

Elektromagnetická kompatibilita

Jmenovité elektrické charakteristiky

Jmenovitá zkratová odolnost

Jmenovitý tepelný proud

Spínací výkon

Spínací doba

Magnetový systém

Jmenovité charakteristiky motoru

Kontakty

Speciální charakteristiky

Ověření návrhu

Exportovat specifikaci produktu

Declarations of conformity

eCAD model

Instalační návody

mCAD model

PEP Eco-passport

Schémata zapojení

System overview

Výkresy

Navrženo pro vzájemnou spolupráci

104481 Kód modelu: DILMF115(RAC240)

General specifications

Vlastnosti a funkce

Obecné

Klimatické podmínky a podmínky prostředí

Elektromagnetická kompatibilita

Jmenovité elektrické charakteristiky

Jmenovitá zkratová odolnost

Jmenovitý tepelný proud

Spínací výkon

Spínací doba

Magnetový systém

Jmenovité charakteristiky motoru

Kontakty

Speciální charakteristiky

Ověření návrhu

Exportovat specifikaci produktu

Declarations of conformity

eCAD model

Instalační návody

mCAD model

PEP Eco-passport

Schémata zapojení

System overview

Výkresy

Navrženo pro vzájemnou spolupráci

DISKUTUJME O VELKÝCH NÁPADECH

104481
Kód modelu: DILMF115(RAC240)