Serial Number Verified :
The product is verified as being authentic; however, this does not guarantee the condition or fit for purpose of the product.

GuideLed CG-S - Central battery exit sign panel

The GuideLed central battery system exit sign luminaire family is a prime example of how the adherence to standards, diverse possibilities for mounting and a high level of economy is not at all contrary to outstanding design.  

Made possible by Lightguide technology, high-efficiency LEDs with a service life of up to 50,000 hours ensure high operational safety,  absolutely homogeneous and bright luminous surface.

An especially low connected load enables energy savings of up to 60% compared to fluorescent lamps. GuideLed also catches the eye with regard to design with a concise functionality without visible screw connections, and a very flat construction that blends unobtrusively into the surrounding architecture.

Viewing distance
All variants are available in 20 m and 30 m
efficient LED
Uses up to 70% less energy to a fluorescent lamp
slender design
Between 12 mm and 36 mm


  • Exit sign luminaire in LED technology for wall mounting, ceiling installation
  • Very good perceptibility on account of high luminance of the white contrasting colour > 500 cd/m² in keeping with standard ISO 3864-1 and high uniformity Lmin/Lmax > 0.8
  • Reduced battery costs on account of especially low power consumption.
  • Low operating costs on account of low effective power of 2.9 W only. (1.9 W one-sided)
  • Minimum service requirement due to high service life of the LEDs (up to 50,000 hours).
  • Installation of the LED pictogram without tools on the mounting set.

Linear design combined with high economy

The wide-ranging product portfolio makes GuideLed a real all-rounder: escape sign luminaires with viewing distances of 20 m or
30 m, as single-sided or double-sided versions and with a total of six different mounting types make them the optimal solution for all room situations.
GuideLed 11021 - 30 m Baldachin
GuideLed 11022 - 30 m Pendelmontage
Pendant tube suspension
GuideLed 10024 - 20 m Deckeneinbaugehäuse
Ceiling recessed
GuideLed 11025 - 30 m Seilabhängung
Wire suspension
GuideLed 10011 - 20 m Wandmontage
Wall recessed
GuideLed 10026 - 20 m Deckeneinbau Seil
Wire suspension recessed

Exemplary design based on revolutionary technology

Exit signs have to be visible in order to provide orientation in case of an emergency. And, they have to be unobtrusively enough to match the architecture. Irrespective of whether the luminaire is installed to the wall or is suspended freely, both GuideLed variants stand out for their clear functionality without visible screw connections and their unsurpassed flat design. The wall mounting appears especially unobtrusive with a mounting height of only 14 mm.

Modular construction and simple installation

The modular construction and snap-on connections reduce the installation work considerably. A work process in two-steps has proved expedient: first install the mounting set, connect the mains cable and set the address. When the building dust has settled down, connect the pictogram with the clamp terminals and simply snap on the mounding set - that's all.

Lightguide technology for perfect illumination

The highly developed Lightguide technology converts the concentrated light density of the LED into an absolutely uniformly and bright surface with over 500 cd/m² luminance in the white area. In this way, the exit sign always stays well visible even in case of bad visibility or light surroundings.

Despite the very good photometric values, the new Lightguide technology with its especially efficient LEDs uses up to 70 per cent less energy compared to the previous escape sign luminaires using fluorescent lamps.

Badly illuminated escape sign
Eaton GuideLed illumination

Pictogram customization

The role of exit sign luminaires may not always be showing the escape route. Sometimes, it is necessary to easily identify the location of safety equipment, refuge, assembly point. etc.

Eaton has developed a core range of specific pictograms for several product families to cover most of those signage requirements.

Want to find out more or don't see the pictogram you require? Contact our sales team and they'll be happy to discuss the specifics needs of a project with you.

Eaton emergency lighting pictogram customization top level options

From one of the world's leading suppliers of emergency lighting, view the rest of Eaton's central battery exit sign panel luminaires

Over 50 years of safe evacuation expertise

Eaton offers a wide range of emergency exit and safety luminaires. Featuring CEWA GUARD & STAR technology available as standard, they offer the basis for minimized inspection and maintenance costs. Innovative lighting technology combined with highly efficient LEDs ensure up to 70% less power consumption and significantly lower maintenance costs with a service life up to 50,000 hours.
How to buy from Eaton
Locate a field sales representative

Find your Eaton country distributor

Questions before you buy

Contact us via web form by clicking the link above.