Serial Number Verified :
The product is verified as being authentic; however, this does not guarantee the condition or fit for purpose of the product.

BeamLite II - Self-contained beam light

Eaton’s BeamLite II, high-intensity double light sources, provide efficient illumination of long, narrow escape routes, but can also provide general wide coverage of a specific area when positioned at any degree specified to each other, in locations where higher illumination is required. Also provides a complete solution from a single luminaire, whether you are providing lighting for a large factory floor, a shopping centre or an entertainment venue.

Rated at IP65 ingress protection and with IK07 impact resistance, BeamLite II can be used in even the harshest of environments while the new design, with compact efficient batteries and LED light heads contained in the same unit, also makes these emergency light fittings applicable for commercial applications.

This range of beam light self-contained luminaires is composed of 1h, 2h and 3h duration versions, from 200 to 800lm light output. The LEDs within the BeamLite alongside the automatic testing and monitoring devices (using CGLine+ versions) significantly reduces the operating and maintenance costs of the installation.

Up to 800 lumens with 2 directional LED lamp heads
Up to 25m with optimum spacing of 34.6m
Narrow or wide light distribution


  • Variants of 200lm, 400lm and 800lm light output
  • 12 dedicated LEDs in each light head
  • E-focus programming: narrow and wide light distribution, programmed by the user
  • 1h, 2h and 3h duration


  • Suitable for use in large areas
  • Locking mechanism of light head preventing accidental change of light head configuration
  • Degree of protection IP65 and IK07
  • CGLine+ technology


Patented E-focus technology

BeamLite II is designed to be used for Escape Route or Open area illumination within the same device. Providing the user/installer with the ability to define the light distribution which fits the application. 

Additionally, the user can direct the light output to test the product light direction via a test button and install the light heads to best suit the application.

E-focus programming allows you to select what illumination you need for the application. Both wide area anti-panic lighting and narrow focused illumination is possible from the same fitting. Simply select wide or narrow focus via the test point button.

All angles covered with fully adjustable lamp heads

The LED lamp heads of the BeamLite II can be easily directed on specific degrees of inclination from 0° to 90° and rotated up to 360° for ultimate flexibility during installation and lighting design.

Industrial and modern design

BeamLite II is ideal for industrial applications such as factories or warehouses, but a complete redesign of the range means that it can now also be used in areas where aesthetics are important.

Simply the most flexible, reliable monitoring for peace of mind

The BeamLite II luminaires can be reliably and efficiently monitored thanks to CGLine+ technology.
How to buy from Eaton
Locate a field sales representative

Find your Eaton country distributor

Questions before you buy

Contact us via web form by clicking the link above.