Serial Number Verified :
Authenticated:
The product is verified as being authentic; however, this does not guarantee the condition or fit for purpose of the product.

DILM/DILH power contactors

The DILM and DILH contactors of the Eaton Moeller series are specifically designed for very high current ranges from 185 A to 2,600 A. With their electronically controlled drives, compact size and long service life, the contactors make for a reliable component in any machine and system.

DILM/DILH power contactors
Suitable for global use:
UL, CSA, CCC, GL, DNV
Temperature range:
-40°C to +70°C
Efficient:
up to 1.2 million electrical switching operations

Core features

  • Utilisation category AC 1 and AC 3
  • Suitable for up to 1,000 V
  • AC/DC wide-range coil
  • Low holding power
  • Compact size
  • Auxiliary contacts: two NO, two NC

Contactors from 185 A to 225 A

The contactors from 185 A to 225 A stand out for their compact size and their reduced holding power. The range coils are equipped with an integrated suppressor circuit and two auxiliary contacts as standard: two NO and two NC.

Contactors from 250 A to 2,600 A - the standard version

The holding power of the contactors is process-controlled, which causes significantly less heating inside the switch cabinet. In addition, this optimisation of the contact forces also contributes to a longer service life of the switching contacts. The suppressor circuit is already built in, as are two NO contacts, two NC contacts and the auxiliary contacts.

Contactors from 250 A to 2,600 A - the comfort version

Thanks to its low pull-in power, the comfort version of the contactors facilitates the implementation of smaller control transformers. The AC/DC wide-range coil comes with a high voltage range, and the contactors can also be controlled directly from a PLC.

DILM 580 A - 1,400 A contactors

The vacuum technology allows for the implementation of a compact design, as it prevents the formation of open arcs and thus the release of any switching gases. As such, a tighter arrangement of the switchgear is possible, and the distances to conductive structures can be smaller than would otherwise be the case.

DILM 1600 & DILH 2000-2600 double contactors

The double contactors come pre-assembled on a mounting plate. For each phase, the current is distributed via two parallel vacuum tubes. The contactors are safely connected by two coupled and monitored drives. These are electronically controlled in a synchronised manner.

The Eaton Moeller series—a 100-year legacy

With over 100 years of experience in starting, controlling and protecting motors, the Eaton Moeller series offers you a proven product portfolio that will help you use energy more reliably, efficiently, safely and sustainably.