NZMS2-4-A125-SVE. Circuit breaker 4-pole 125A, system/cable protection, withdrawable unit
| Product Name |
Eaton Moeller series NZM molded case circuit breaker thermo-magnetic
|
| Catalog Number |
113313
|
| EAN |
4015081128488
|
| Product Length/Depth |
180 mm
|
| Product Height |
245 mm
|
| Product Width |
140 mm
|
| Product Weight |
4.07 kg
|
| Compliances |
RoHS conform
|
| Model Code |
NZMS2-4-A125-SVE
|
| Voltage rating |
690 V - 690 V
|
| Current rating of neutral conductor |
100% of phase conductor
|
| Amperage Rating |
125 A
|
| Instantaneous current setting (Ii) - min |
6 A
|
| Instantaneous current setting (Ii) - max |
10 A
|
| Overload current setting (Ir) |
100 A - 125 A
|
| Overload current setting (Ir) - min |
100 A
|
| Overload current setting (Ir) - max |
125 A
|
| Short delay current setting (Isd) - min |
0 A
|
| Short delay current setting (Isd) - max |
0 A
|
| Short-circuit release non-delayed setting - min |
6 A
|
| Short-circuit release non-delayed setting - max |
10 A
|
| Rated short-circuit breaking capacity Ics (IEC/EN 60947) at 400/415 V, 50/60 Hz |
70 kA
|
| Electrical connection type of main circuit |
Screw connection
|
| Handle type |
Rocker lever
|
| Overvoltage category |
III
|
| Pollution degree |
3
|
| Current rating of neutral conductor |
100% of phase conductor
|
| Amperage Rating |
125 A
|
| Instantaneous current setting (Ii) - min |
6 A
|
| Instantaneous current setting (Ii) - max |
10 A
|
| Overload current setting (Ir) |
100 A - 125 A
|
| Overload current setting (Ir) - min |
100 A
|
| Overload current setting (Ir) - max |
125 A
|
| Short delay current setting (Isd) - min |
0 A
|
| Short delay current setting (Isd) - max |
0 A
|
| Short-circuit release non-delayed setting - min |
6 A
|
| Short-circuit release non-delayed setting - max |
10 A
|
| Rated short-circuit breaking capacity Ics (IEC/EN 60947) at 400/415 V, 50/60 Hz |
70 kA
|
| Electrical connection type of main circuit |
Screw connection
|
| Handle type |
Rocker lever
|
| Overvoltage category |
III
|
| Pollution degree |
3
|
| Mounting Method |
Built-in device plug-in technique
|
| Degree of protection |
IP20
|
| Number of auxiliary contacts (change-over contacts) |
0
|
| Number of auxiliary contacts (normally closed contacts) |
0
|
| Number of auxiliary contacts (normally open contacts) |
0
|
| Position of connection for main current circuit |
Back side
|
Enviar correo electrónico
Especificaciones del producto
