Serial Number Verified :
The product is verified as being authentic; however, this does not guarantee the condition or fit for purpose of the product.

xPole PFIM Type F residual current circuit breaker

Eaton offers a complete range of compact residual current devices for fault current/residual current and additional protection in residential and small commercial applications. Type F circuit breakers are a special variant of type A devices with modified frequency characteristics. This Type F RCDs complies with IEC/EN 62423 and provides safe and reliable protection against sinusoidal residual currents and pulsating DC fault currents. It can also handle residual currents with mixed frequencies of up to 1 kHz (10, 50, 1,000 Hz) as per IEC/EN 62423.

Design according to
IEC/EN 62423
current withstand capability
3 kA
DC residual currents
up to 10 mA

Core features

  • Increased protection in applications with 1-phase frequency converters thanks to the detection of mixed frequencies
  • Reduction of nuisance tripping thanks to
    - time-delayed tripping
    - increased current withstand capability > 3 kA
  • Higher load rating with DC residual currents up to 10 mA
  • Comprehensive range of accessories
  • Contact position indicator
  • Automatic re-setting possible (with autorecloser)
  • Compatible with the other devices from the P series, which can be connected by means of a standard busbar
  • Twin-purpose terminal (lift/open-mouthed) at top and bottom
  • Can be positioned on busbar at top or bottom
  • Free terminal space despite installed busbar
  • Z-A universal tripping signal switch (also suitable for PLS and PKN) can be retrofitted
  • Z-HK auxiliary switch can be retrofitted
  • Contact position indicator red - green
  • Time-delayed types suitable for use with standard fluorescent lamps, with or without electronic ballast (30mA-RCD: 30 units per phase conductor)
  • The installation position does not affect the functioning of the device
  • Line voltage-independent tripping
  • Mains connection at either side
  • The 4-pole device can also be used for 2- or 3-pole connections

Reliable protection for machines

These products help maintain an optimal system and provide additional protection against residual earth leakage currents for a wide range of applications. They come with different tripping characteristics to cater for a variety of electrical systems and components. The devices offer a wide range of nominal currents and comprehensive optional accessories.

Type of protection

Since tripping does not depend on the mains voltage, this RCD is suitable for “fault current/residual current protection” as well as “additional protection” within the meaning of the applicable standards.

Enhanced application protection

Increased protection in applications with 1-phase frequency converters thanks to the detection of mixed frequencies and a higher load capacity for smooth DC fault currents up to 10 mA.
How to buy from Eaton
Questions before you buy

Contact us via web form by clicking the link above, or call us: 01753 608 700 – option 2, then option 1