Select your location

Serial Number Verified :
The product is verified as being authentic; however, this does not guarantee the condition or fit for purpose of the product.

FHM Fixture Hanger with Locking Plug

The Crouse-Hinds series FHM fixture hanger with locking plug is used for mounting industrial LED and HID type light fixtures in non-hazardous locations.

FHM Fixture Hanger

Certifications and compliances

  • Meets UL and NEMA requirements for the listed electrical ratings

Design features

  • Power hook housing has two 3/4” through feed hubs and one 3/4” hub on the top for pendant mounting; through feed hubs are furnished with flush plugs
  • Cast mounting lugs are provided for direct ceiling mounting
  • Housing contains a roomy 15 cu. in. splicing chamber and interlocking type receptacle with leads
  • Plugs and receptacles are interlocking to prevent accidental disengagement.  When plug is inserted, hook is blocked and luminaire assembly cannot be removed.  To service the luminaire, pull the plug, unhook the loop luminaire assembly, and take it to a convenient servicing area
  • Loop can move a maximum of 30°, allowing the power hook to be mounted on a canted ceiling; the luminaire assembly will hang true to the vertical
  • Loop and hook are shaped for selfalignment and resist twisting of luminaire by gusts of wind or light drafts 
  • Supporting loop is furnished with 16” of #16-3/C Type SO cord and an interlocking type plug

Standard materials

  • Power hook body – copper-free aluminum
  • Access cover – zinc plated cold rolled steel
  • Loop – copper-free aluminum
How to buy from Eaton
Locate a channel partner

Find an authorized distributor or sales rep near you

Questions before you buy

Email us using the link above, or call our Customer Support team at 1-866-764-5454