Select your location

Serial Number Verified :
Authenticated:
The product is verified as being authentic; however, this does not guarantee the condition or fit for purpose of the product.

Champ CPMVF fluorescent hazardous area wallpack light fixtures

The Crouse-Hinds series Champ CPMVF Fluorescent Wall Pack Fixture is ideal for low-profile mounting in hazardous and industrial environments. Additionally, it is suitable for any area with adverse conditions such as dust, dirt, moisture, vibration, high-pressure hose downs, and high thermal ambients.  Its precisely designed glass refractor minimizes fixture depth while providing uniform, glare-free illumination. Common applications include wall mounting or vertical surface mounting where minimal fixture depth is required.

The CPMVF Wall Pack is approved for use in Class I, Division 2 and Zone 2 locations, as well as Class II locations.  The fixture is also available with a battery pack ballast for emergency lighting applications (CPMVFB models). 

Champ CPMV and CPMVF Wall Pack

Certifications and compliances

NEC and CEC

  • Class I, Division 2, Groups A, B, C, D
  • Class II, Class III & Simultaneous Presence (Class I, Division 2 and Class II)
  • Class I, Zone 2
  • Emergency Lighting (CPMVFB models)

IEC

  • Zone 2 Ex nR IIC

UL Standards

  • 844, 2279 Hazardous (Classified) Locations
  • 1598 Luminaires
  • 1598A Marine Locations
  • 924 Emergency Lighting (CPMVFB models)

CSA Standards

  • C22.2 No. 137

Design features

  • Unique compact shallow profile design mounts virtually anywhere
  • Side hinged cover with two screw closing for easy installation and maintenance
  • Gray Corro-free™ epoxy powder coat two-piece housing provides superior corrosion resistance
  • Unique stainless steel wire guard accessory attaches without any additional hardware for easy installation and maintenance
  • Glass refractor provides uniform light distribution to eliminate glare
  • Silicon gaskets make luminaire suitable for NEMA 4X, marine environments
  • High power factor ballasts (+90%) are standard, which allow more luminaires per circuit

Standard materials

  • Luminaire housing and door frame assembly – copper-free aluminum with Corro-free™ epoxy powder coat
  • External hardware – stainless steel
  • Lens – heat- and impact-resistant refractor style glass
  • Gaskets – silicon rubber
  • Reflector – aluminum light sheet
  • Wire guard – stainless steel

Drawings and Design Support

How to buy from Eaton
Locate a channel partner

Find an authorized distributor or sales rep near you

Questions before you buy

Email us using the link above, or call our Customer Support team at 1-866-764-5454