Select your location

Highbay, lowbay and industrials
Champ N2MVF non-metallic fluorescent hazardous area light fixtures
Serial Number Verified :
Authenticated:
The product is verified as being authentic; however, this does not guarantee the condition or fit for purpose of the product.

Champ N2MVF non-metallic fluorescent hazardous area light fixtures

Champ N2MVF Nonmetallic Fluorescent light fixtures from Eaton's Crouse-Hinds Division provide general area lighting in hazardous areas that are also subject to salt water or corrosive environments.  Ideal for marine applications such as dockside and harbor installations, the N2MVF Fluorescent is available in 52W or 64W and is approved for use in Class I, Division 2 and Class II, Division 1 locations.

Champ N2MVF non-metallic fluorescent hazardous area light fixtures

Certifications and compliances

NEC and CEC

  • Class I, Division 2, Groups A, B C, D
  • Class II, Class III & Simultaneous Presence (Class I, Division 2 and II)

UL Standards

  • 844 Hazardous (Classified) Locations
  • 1598 Luminaires
  • 1598A Marine Locations

CSA Standards

  • C22.2 No. 137

Design features

  • Housings and mounting modules made of polyphenylene sulfide (PPS) for strength and maximum resistance to corrosion
  • Pendant mounting module equipped with integral hub set screws for vibration resistance
  • Hubs are provided with an integral bushing to help prevent damage to field wiring during installation and ground connection for positive bonding
  • Guard, hub inserts, stanchion elbow, and hardware made of stainless steel for maximum resistance to corrosion
  • Grounding wire for safety
  • Stainless steel open bottom guard permits direct access to the globe for easy relamping
  • Hinged assembly allows the luminaire to hang free during installation to permit the use of both hands when wiring
  • One external captive screw for ease of installation
  • Handle – hinge assembly doubles as a handle for ease of installation, especially when carrying up a ladder

Standard materials

  • Housing, mounting modules – polyphenylene sulfide (PPS)
  • Guard, hub inserts, stanchion elbow, hardware – stainless steel
  • Globe – heat- and impact-resistant, internally fluted glass
  • Gaskets – silicone rubber

Drawings and Design Support

How to buy from Eaton
Locate a channel partner

Find an authorized distributor or sales rep near you

Questions before you buy

Email us using the link above, or call our Customer Support team at 1-866-764-5454