Certifications and compliances
NEC and CEC
- Wet locations, Type 4X, IP66
UL standards
- UL1598 Luminaires, UL1598A Marine, UL8750
CSA standard
- cUL Listed to CSA standard CSA C22.2 No. 250
IEC standard
- IEC 60598
- CE
Serial Number Verified :
Authenticated: ![]()
The product is verified as being authentic; however, this does not guarantee the condition or fit for purpose of the product.
The product is verified as being authentic; however, this does not guarantee the condition or fit for purpose of the product.
Champ Pro PFMA LED Industrial Floodlights
Eaton's Crouse-Hinds series Champ Pro PFMA LED floodlights are designed to provide full-spectrum, crisp, white light in heavy industrial and harsh areas. Eleven versions of the Champ PFMA are available, ranging from 3,000 to 50,000 lumens, providing a reliable and long-life solution for a wide range of floodlighting applications.
Our PFMA LED floodlights are designed with a Type 4X, epoxy powder coated die cast aluminum housing, making them ideal for outdoor wall and stanchion mounted general area lighting where corrosive, wet, dusty, hot and/or cold conditions exist.
Reliability
60,000 hours at 55°C ambient
Reliability
Operating ambient -40°C to 65°C
Efficiency
72% energy savings over HID
Design features
- Eleven models from 3,000 lumens to 50,000 lumens for a wide range of industrial floodlighting applications
- Provides up to 60,000 hours rated life at 55°C – eliminates need for frequent lamp replacement
- Die cast aluminum heat sink increases surface areas and improves airflow, optimizing both LED and driver life
- Energy-efficient technology – up to 72% energy savings over HID floodlights
- Shock- and vibration-resistant solid state luminaires have no filaments or glass components that could break – greatly reduces the risk of premature failure
- Easy installation – yoke design to mount to existing Crouse-Hinds series SFA6 slipfitter and SWB6 wall mount
- Cool white (5000K, 70 CRI) and warm white (3000K, 80 CRI)
- Instant illumination and restrike
- Cold temperature operation/no warm-up required
- Serviceable drivers
- Contains no mercury or other hazardous substances
- Operating ambient -40°C to 65°C
Standard materials
- Body–straight: steel; 45°: malleable iron; 90°: malleable iron
- Gland nut: steel
- Ferrule: steel
- Gland nut sealing ring: nylon
- Sealing gasket: polypropylene
- Locknut: steel
Videos
Drawings and design support
How to buy from Eaton
Locate a channel partner
Find an authorized distributor or sales rep near you
Questions before you buy
Email us using the link above, or call our Customer Support team at 1-866-764-5454
