Fastener hardware and accessories

Metal stud grommets

Protects wire insulation in accordance with NEC Article 300.4(B) (1).

• BM1  : snaps into standard 1-11/32” diameter holes in metal studs from 25-gauge to 16-gauge.  For bulk option, order BM1M.
• BM2 : universal BM2 provides 360˚ protection, fits all factory-punched metal stud holes. Ships as one piece and easily separated for installation.

Pipe sleeve fasteners

• Allows for rigid attachment of pipe sleeves to wall and floor forms for concrete pouring
• Accommodates Schedule 40, Schedule 80 or 5/16” and smaller wall thickness
• BD40 for all sleeve diameters, wall thickness of 5/18” and smaller
• BD40 for 2” to 6” sleeve diameters, schedule 40 pipe

Machine screen anchors and setting tools

• For use in concrete, block, brick or stone
• Not recommended for use in overhead applications
• Readily accepts machine bolts
• Internally threaded anchor for easy removability and service work
• Anchor installation requires shallow embedment
• Anchor part numbers
  • AMS-25, rod diameter ¼”
  • AMS-37, rod diameter 3/8”
  • AMS-50, rod diameter ½”
• Setting tool part numbers
  • 9221, rod diameter ¼”
  • 9231, rod diameter 3/8”
  • 9241, rod diameter ½”

Self-tapping screw anchors and setting tool

• For use in normal-weight concrete, structural sand light-weight concrete and concrete over metal deck
• Anchor design allows for shallow embedment and mechanically interlocks with base material
• Internally threaded anchor for easy adjustment and removability of threaded rod or bolt
• Fast anchor installation with a powered impact wrench
• Suitable for overhead applications such as suspending cable tray, strut, pipe hangers and conduit
• FM Approved, ICC-ES certified (see ICC-ES ESR-2272)
• Made of zinc plated carbon steel
• Setting tool included
• Part numbers:
  • ATM-37, size 3/8” for 11/18” threaded depth
  • 6407 SD, 3/8” setting tool

• Metal wall screws
  • Part numbers: AWS-CH (combo head), AWS-OH (oval head), AWS-PH (pan head)
• Plastic screw anchors
  • Part numbers: APS-4 (#4 - #10 size), APS-6 (#6 - #12 size), APS-8 (#8 - #14 size)
• Plastic hollow wall anchors
  • Part numbers: APH-18, APH-25, APH-37, APH-50

• Self-drilling wallboard anchors
  • Part numbers: APD-8K, AZD-8K, APDM-6K, AZDM-6K
• Plastic conical anchors
  • Part numbers: APC-8K, APC-10K, APC-12K
• ¼”-20 x ½” slotted hex Head Machine Screw
• ¼”-20 Machine Square Nut
• Sheet Metal Screw, #8 x 9/16”
• #8 x ½” Self-Drilling Sheet Metal Screw