Select your location

Serial Number Verified :
Authenticated:
The product is verified as being authentic; however, this does not guarantee the condition or fit for purpose of the product.

Quik-Loc Medium Voltage Plugs and Receptacles

Eaton's Crouse-Hinds Division provides a wide range of medium voltage Quik-Loc Connectors designed for service under the most severe mining conditions.  The resilient elastomeric molded construction provides a watertight, corrosion-resistant assembly ensuring rugged, dependable service.  These connectors are field attachable and are equipped with color-coded wiring terminals for easy assembly.  

Crouse-Hinds series Quik-Loc connectors are available from 600 Volts up to 1000 Volts AC or DC capability with ratings from 75 to 500 Amps based on cable capacity. Typical applications include drills, conveyors, heavy equipment, shuttle cars and power distribution.

Certifications and compliances

  • 600V Standard series:  MSHA Approved
  • 600V "G" series: CSA listed to CSA C22.2 No. 182.1‐07/UL1682
  • 100-V "G" series: MSHA Approved
  • "L" series lever action: CSA listed to CSA C22.2 No. 182.1‐07/UL1682
  • "Mag" series lever action: CSA listed to CSA C22.2 No. 182.1‐07/UL1682
  • NEMA 3R - All connectors

Design Features

  • Corrosion Resistant - Molded neoprene components (insert body, sleeve, grommets), neoprene covered alloy couplings and stainless steel clamps are unaffected by most chemicals and acids.
  • Field Attachable - Quick field assembly requires standard tools with color-coded wiring terminals indicating proper conductor locations. Dual set-screw design enhances connection.
  • Quick Disconnect – Couplers with “pin and groove” design support engagement and disengagement in just ¾ turn. Couplers revolve freely on replaceable ball bearings.
  • Safe – All metal components are thoroughly insulated using a barrier of molded neoprene. A reversed ground pin assures positive polarization.
  • Watertight – Compression fi t of neoprene components and cable hugging grommets provide a moisture-tight seal. Positive water seal between mated connectors is provided by an O- ring-type seal molded to the connector.

Standard Materials

  • Plug/Connector Body: EPDM Rubber
  • Insulating Sleeve/Grommet: Neoprene
  • Contacts: Copper/Brass
  • Hose Clamps: Stainless Steel
  • Set Screws: Stainless Steel
  • Mounting Shell:  Manganese Bronze
  • Coupler:  Manganese Bronze
  • Levers: Stainless Steel 
How to buy from Eaton
Locate a channel partner

Find an authorized distributor or sales rep near you

Questions before you buy

Email us using the link above, or call our Customer Support team at 1-866-764-5454