Download document () of 20
Send email
Download
You have exceeded the download limit
The 4-way sounder controller unit is a loop connected interface, enabling the facility to power and control four independent conventional sounder circuits on addressable fire alarm systems.
Greatly simplifying installation in applications where specialist sounders or beacons are required by avoiding the need to connect them directly to the addressable control panel.
Using a single address, each circuit can still be independently controlled according to the required cause and effect programming.
Eaton's 4-way sounder controller unit is predominately designed for building on your existing Eaton addressable fire alarm system.
The unit is ideal for use when buildings are extended and when users need to expand their addressable fire alarm systems. Perfect for use in schools, offices and apartment complexes.
| 4 Way Sounder Controller Unit | CSC354CPR |
| Standards: | CE CPR - EN54-2, EN54-4, EN54:17 |
| Power Supply Unit | |
| Operating Voltage: | 230Vac |
| Current: | 0.5A |
| Frequency: | 50Hz |
| Output: | 18.5V - 29.5V |
| Loop | |
| Operating Voltage: | 24Vdc |
| Quiescent Current: | 310μA |
| Alarm Current: | 6mA |
| Sounder Circuits (4 of) | |
| Operating Voltage: | 24V |
| Load per Channel: | 0.8A |
| Alarm Current: | 1.6A |
| End-of-line Resistor: | 200Ω + Diode |
| Short Circuit Isolation | |
| Total Loop Resistance: | 50Ω |
| Parallel Fault Resistance: | 200Ω |
| Continuous Current Through Isolator (Ic Max): | 700mA |
| Isolator Resistance in Closed State (Zc Max): | 0.26Ω |
| Leakage Current into Direct Short (IL Max): | 15mA |
| Voltage at which Isolator Changes from Open to Closed (Vsc Min & Max): | 3.8V - 11V |
| Voltage at which Isolator Changes from Closed to Open (Vso Min & Max): | 3.8V - 11V |
| Maximum Switching Current (Is Max): | 1.5A |
| Environmental | |
| Operating Temperature: | -5ºC to +45ºC |
| Humidity (Non-condensing): | 0 to 95% RH |
| Physical | |
| Construction: | PC / ABS / Steel |
| Dimensions (HxWxD) | 300mm x 300mm x 74mm |
| Weight: | 5.4kg |
| Ingress protection: | IP30 |
| Compatibility | |
| Suitable for use with: | Eaton Analogue Addressable Fire Systems (800 series protocol PR20007-400) |
