Eaton Moeller® series A-PKZ0 Shunt release (for power circuit breaker), 110 V DC, Standard voltage, DC, Screw terminals, For use with: Shunt release PKZ0(4), PKE
| Product Name |
Eaton Moeller® series PKZ Shunt release
|
| Catalog Number |
073203
|
| EAN |
4015080732037
|
| Product Length/Depth |
68 mm
|
| Product Height |
90 mm
|
| Product Width |
24 mm
|
| Product Weight |
0.126 kg
|
| Certifications |
CE
UL Category Control No.: NLRV CSA CSA Class No.: 3211-05 CSA-C22.2 No. 14 CSA File No.: 165628 UL 508 UL File No.: E36332 IEC/EN 60947-4-1 UL |
| Electric connection type |
Screw connection
|
| Product category |
Accessories
|
| Suitable for |
Motor safety switch
|
| Used with |
Motor protective circuit-breaker
|
| Voltage type |
DC
|
| Mounting position |
Can be fitted to left side of the motor protection switch
|
| Ambient operating temperature - min |
-25 °C
|
| Ambient operating temperature - max |
55 °C
|
| Terminal capacity (solid/flexible with ferrule) |
2 x (0.75 - 2.5) mm²
1 x (0.75 - 2.5) mm² |
| Terminal capacity (solid/stranded AWG) |
1 x (18 - 14)
2 x (18 - 14) |
| Operational voltage |
0.7- 1.1 x Us (DC)
Short-time operation 5 s 0.7 - 1.1 x Us (AC) |
| Rated operational voltage (Ue) at AC - min |
42 V
|
| Rated operational voltage (Ue) at AC - max |
480 V
|
| Rated operational voltage (Ue) at DC - min |
24 V
|
| Rated operational voltage (Ue) at DC - max |
250 V
|
| Operational voltage |
0.7- 1.1 x Us (DC)
Short-time operation 5 s 0.7 - 1.1 x Us (AC) |
| Rated control supply voltage (Us) at AC, 50 Hz - min |
0 V
|
| Rated control supply voltage (Us) at AC, 50 Hz - max |
0 V
|
| Rated control supply voltage (Us) at AC, 60 Hz - min |
0 V
|
| Rated control supply voltage (Us) at AC, 60 Hz - max |
0 V
|
| Rated control supply voltage (Us) at DC - min |
110 V
|
| Rated control supply voltage (Us) at DC - max |
110 V
|
| Number of contacts (change-over contacts) |
0
|
| Number of contacts (normally closed contacts) |
0
|
| Number of contacts (normally open contacts) |
0
|
| Power consumption (pick-up) at DC |
3 W
|
| Power consumption (sealing) at DC |
0.5 W
|
| Equipment heat dissipation, current-dependent Pvid |
0 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
0 W
|
| Rated operational current for specified heat dissipation (In) |
0 A
|
| Static heat dissipation, non-current-dependent Pvs |
0.5 W
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Support from Eaton
Commercial support
Phone: 0800-00-32866
Send email
Product specifications
