Send email
Download document () of 20
Download
You have exceeded the download limit
Eaton Moeller® series T0 Changeover switch, 20 A, Four-pole, switch positions: 3, Type: On/Off switch, Design: 8213
| Product Name |
Eaton Moeller® series T0 Changeover switch
|
| Catalog Number |
197389
|
| Model Code |
T0-4-8213/SE2
|
| EAN |
4015081938636
|
| Product Length/Depth |
250 mm
|
| Product Height |
147 mm
|
| Product Width |
200 mm
|
| Product Weight |
1.61 kg
|
| Certifications |
IEC/EN 60947-3
IEC/EN 60947 VDE 0660 IEC/EN 60204 |
| Number of poles |
Four-pole
|
| Degree of protection (front side) |
IP65
NEMA 12 |
| Suitable for |
Front mounting
|
| Rated uninterrupted current (Iu) |
20 A
|
| Actuator type |
Toggle
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Product specifications
