Download document () of 20
Send email
Download
You have exceeded the download limit
Eaton EU5C Gateway, SmartWire-DT, 58 SWD modules at PROFIBUS-DP
| Product Name |
Eaton EU5C Communication module
|
| Catalog Number |
116308
|
| EAN |
4015081160488
|
| Product Length/Depth |
127 mm
|
| Product Height |
90 mm
|
| Product Width |
35 mm
|
| Product Weight |
0.157 kg
|
| Certifications |
IEC/EN 61131-2
CSA Class No.: 3211-07 CSA File No.: 2324643 EN 50178 UL File No.: E29184 CSA UL Category Control No.: NKCR UL |
| Model Code |
EU5C-SWD-DP
|
| Features |
Overload proof
Potential isolation (Fieldbus Interface) |
| Functions |
For connection to PROFIBUS-DP field bus
|
| Operating mode |
Address allocation via DIP switch
|
| Degree of protection |
IP20
|
| Mounting method |
Screw fixing using fixing brackets ZB4-101-GF1 (accessories)
Top-hat rail fixing (according to IEC/EN 60715, 35 mm) Rail mounting possible Wall mounting/direct mounting |
| Mounting method |
Screw fixing using fixing brackets ZB4-101-GF1 (accessories)
Top-hat rail fixing (according to IEC/EN 60715, 35 mm) Rail mounting possible Wall mounting/direct mounting |
| Overvoltage category |
II
|
| Pollution degree |
2
|
| Product category |
SmartWire-DT coordinators
|
| Repetition rate |
1 s
|
| Residual ripple |
≤ 5 % (input voltage)
|
| Suitable for |
Safety functions
|
| Terminal capacity |
0.2 - 1.5 mm², solid
0.25 - 1.5 mm², flexible with ferrule 24 - 16 AWG, solid or stranded |
| Voltage type |
DC
|
| Constant acceleration |
1 g, 8.4 - 150 Hz, according to IEC/EN 61131-2, Vibrations
|
| Constant amplitude |
3,5 mm, 5 - 8.4 Hz, according to IEC/EN 61131-2, Vibrations
|
| Drop and topple |
50 mm Drop height, Drop to IEC/EN 60068-2-31
|
| Height of fall (IEC/EN 60068-2-32) - max |
0.3 m
|
| Mounting position |
As required
|
| Shock resistance |
15 g, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 11 ms, 9 Impacts
|
| Air pressure |
795 - 1080 hPa (operation)
|
| Ambient operating temperature - min |
-25 °C
|
| Ambient operating temperature - max |
55 °C
|
| Ambient storage temperature - min |
-40 °C
|
| Ambient storage temperature - max |
70 °C
|
| Climatic proofing |
In accordance with IEC 60068-2
|
| Operating temperature - min |
-25 °C
|
| Operating temperature - max |
55 °C
|
| Relative humidity |
5 - 95 % (non-condensing, IEC/EN 60068-2-30)
|
| Air discharge |
8 kV, according to IEC 61131-2, level 3, ESD
|
| Burst impulse |
2 kV, Supply cable, according to IEC/EN 61131-2, Level 3
1 kV 1 kV, SmartWire-DT cable, according to IEC/EN 61131-2, Level 3 |
| Contact discharge |
4 kV, according to IEC/EN 61131-2, Level 2, ESD
|
| Electromagnetic fields |
1 V/m at 2.0 - 2.7 GHz (according to IEC/EN 61131-2:2008)
10 V/m at 80 - 1000 MHz (according to IEC/EN 61131-2:2008) 3 V/m at 1.4 - 2 GHz (according to IEC/EN 61131-2:2008) |
| Radiated RFI |
10 V (IEC/EN 61131-2:2008, Level 3)
|
| Radio interference class |
Class A (EN 55011)
|
| Surge rating |
0.5 kV, Supply cable, Surge (IEC/EN 61131-2:2008, Level 1), EMC
|
| Voltage dips |
≤ 10 ms, Bridging voltage dips
|
| Inrush current |
12.5 A (for 6 ms)
|
| Power loss |
Normally 1 W
|
| Rated control supply voltage |
24 V DC (UPOW, -15 %/+20 %)
24 V DC (UAUX, -15 %/+20 %) |
| Rated operational current (Ie) |
0.7 A
|
| Rated operational voltage |
14.5 V (± 3 % - SmartWire-DT)
Typically UAUX -0.2 V (for 24 V DC slaves) |
| Short-circuit protection |
Yes, Short-circuit rating, SmartWire-DT supply voltage
No, external fuse FAZ Z3, Supply voltage UAux |
| Supply current - max |
0.7 mA
|
| Supply voltage at AC, 50 Hz - min |
0 V
|
| Supply voltage at AC, 50 Hz - max |
0 V
|
| Supply voltage at DC - min |
20.4 V
|
| Supply voltage at DC - max |
28.8 V
|
| Addressing |
Address range: 1 - 126
Address set automatically |
| Connection |
SmartWire-DT gateway for connecting up to 58 SmartWire-DT modules to the field bus and for powering the SmartWire-DT modules and switchgear.
SmartWire-DT blade terminal SWD4-8MF2 Used to connect the SmartWire-DT communication system to industrial field bus systems. Powers SmartWire-DT modules and switchgear The connection to a PROFIBUS-DP is carried out via the 9 pole SUB-D socket as slave. |
| Connection type |
SWD: Plug, 8-pole
1 x D-SUB socket, 9-pin, Field bus Push in terminals, Supply voltage |
| Data transfer rate |
240 Byte, Fieldbus interface, Output data, max.
250 kBit/s, SmartWire-DT Automatic baud rate detection for rates ranging from 9.6 kBit/s to 12 Mbit/s. 125 kBit/s, SmartWire-DT 240 Byte, Fieldbus interface, Input data, max. Up to 12 MBit/s, Fieldbus interface |
| Interfaces |
Module type: PROFIBUS DP slave
Status display fieldbus interface for DP with Multi color LED Terminating resistor switchable via field bus connectors |
| LED indicator |
Status indication of SmartWire-DT network: Configurable green or red LED
Status indication of SmartWire-DT master: Green and red LEDs Status indication of Supply voltage: LED |
| Number of modules |
58 (SmartWire-DT)
|
| Protocol |
DeviceNet
PROFIBUS-DP |
| Station |
2 - 125, Station address, Fieldbus interface
SmartWire-DT master, SmartWire-DT network |
| Explosion safety category for dust |
None
|
| Explosion safety category for gas |
None
|
| Potential isolation |
Supply voltage UAUX: no
Between UPow and 15 V SmartWire-DT supply voltage: no |
| Protection against polarity reversal |
Yes, for supply voltage (Siemens MPI optional)
Yes |
| Equipment heat dissipation, current-dependent Pvid |
3.8 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
0 W
|
| Rated operational current for specified heat dissipation (In) |
0 A
|
| Static heat dissipation, non-current-dependent Pvs |
1 W
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Meets the product standard's requirements.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Product specifications
