Download document () of 20
Send email
Download
You have exceeded the download limit
Eaton PV Main switch, T0, 20 A, surface mounting, 1 contact unit(s), 2 pole, STOP function, Lockable in the 0 (Off) position PV-20A-2P-AC-I1/SVB-SW
| Product Name |
Eaton PV maintenance switch
|
| Catalog Number |
199535
|
| EAN |
5027590552158
|
| Product Length/Depth |
137 mm
|
| Product Height |
110 mm
|
| Product Width |
80 mm
|
| Product Weight |
274 g
|
| Compliances |
CE
|
| Model Code |
PV-20A-2P-AC-I1/SVB-SW
|
| Features |
Version as main switch
Version as maintenance-/service switch |
| Functions |
Interlockable
|
| Number of poles |
Two-pole
|
| Degree of protection |
NEMA Other
|
| Degree of protection (front side) |
IP20
|
| Suitable for |
Ground mounting
|
| Rated operational power at AC-3, 380/400 V, 50 Hz |
5.5 kW
|
| Rated operational power at AC-23A, 400 V, 50 Hz |
5.5 kW
|
| Rated uninterrupted current (Iu) |
20 A
|
| Rated conditional short-circuit current (Iq) |
6 kA
|
| Rated short-time withstand current (Icw) |
0.32 kA
|
| Number of auxiliary contacts (change-over contacts) |
0
|
| Number of auxiliary contacts (normally closed contacts) |
0
|
| Number of auxiliary contacts (normally open contacts) |
0
|
| Actuator color |
Black
|
| Actuator type |
Door coupling rotary drive
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
UV resistance only in connection with protective shield.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Product specifications
