Download document () of 20
Send email
Download
You have exceeded the download limit
Eaton's zone monitor unit enables the connection of a zone of Eaton conventional detectors and a separate zone of Eaton conventional callpoints (if required) to an Eaton addressable fire system.
This interface allows for a wide variety of installations to be simplified without the use of specialist or customised equipment, and allows for easier connection to existing conventional detection zones, as long as the devices used are compatible.
An extensive range of interfaces are available to support the Eaton range of control panels, providing solutions for most design requirements.
| Zone Monitor Unit | CZMU352 |
| Zone Monitor Unit - intrinsically safe | CZMU352-IS |
| CZMU532 / CZMU532-IS | |
| Standards: | EN54 Pt17 & Pt18 2005 |
| Operating Voltage: | 18Vdc to 30Vdc |
| Quiescent Current: | 2.8mA |
| Alarm Current: | 8mA |
| Current with 20 Detectors: | 3.4mA |
| Detector Load: | 20 detectors per zone (max) |
| Callpoint Load: | Unlimited |
| Operating Temperature: | -10°C to +60°C |
| Humidity (Non-condensing): | 0 to 95% RH |
| Construction: | PC / ABS |
| Dimensions (HxWxD): | 88mm x 147mm x 60mm |
| Weight: | 0.23kg |
| Ingress Protection: | IP40 |
| Suitable for use with: | Eaton addressable fire alarm systems |
