Send email
Download document () of 20
Download
You have exceeded the download limit
Eaton Moeller® series P1 On-Off switch, P1, 32 A, 3 pole, surface mounting, with black thumb grip and front plate, in steel enclosure
| Product Name |
Eaton Moeller® series P1 On-off switch
|
| Catalog Number |
197352
|
| EAN |
4015080894896
|
| Product Length/Depth |
200 mm
|
| Product Height |
127 mm
|
| Product Width |
150 mm
|
| Product Weight |
1.625 kg
|
| Certifications |
IEC/EN 60947
IEC/EN 60947-3 VDE 0660 IEC/EN 60204 |
| Features |
Version as maintenance-/service switch
|
| Fitted with: |
Black thumb grip and front plate
|
| Number of poles |
Three-pole
|
| Accessories |
Auxiliary contact or neutral conductor fitted by user.
|
| Degree of protection |
NEMA 12
|
| Degree of protection (front side) |
IP65
|
| Lifespan, mechanical |
300,000 Operations
|
| Mounting method |
Surface mounting
|
| Mounting position |
As required
|
| Operating frequency |
1200 Operations/h
|
| Overvoltage category |
III
|
| Pollution degree |
3
|
| Product Category |
On-Off switch
|
| Product Category |
On-Off switch
|
| Rated impulse withstand voltage (Uimp) |
6000 V AC
|
| Safe isolation |
440 V AC, Between the contacts, According to EN 61140
|
| Safety parameter (EN ISO 13849-1) |
B10d values as per EN ISO 13849-1, table C.1
|
| Shock resistance |
15 g, Mechanical, According to IEC/EN 60068-2-27, Half-sinusoidal shock 20 ms
|
| Suitable for |
Ground mounting
|
| Switching angle |
90 °
|
| Ambient operating temperature (enclosed) - min |
-25 °C
|
| Ambient operating temperature (enclosed) - max |
40 °C
|
| Terminal capacity |
2 x (1 - 4) mm², flexible with ferrules to DIN 46228
1 x (1 - 4) mm², flexible with ferrules to DIN 46228 1 x (1.5 - 6) mm², solid or stranded 2 x (1.5 - 6) mm², solid or stranded |
| Screw size |
M4, Terminal screw
|
| Tightening torque |
1.6 Nm, Screw terminals
14 Nm, Screw terminals |
| Rated breaking capacity at 220/230 V (cos phi to IEC 60947-3) |
260 A
|
| Rated breaking capacity at 400/415 V (cos phi to IEC 60947-3) |
300 A
|
| Rated breaking capacity at 500 V (cos phi to IEC 60947-3) |
290 A
|
| Rated breaking capacity at 660/690 V (cos phi to IEC 60947-3) |
250 A
|
| Rated operational current (Ie) at AC-21, 440 V |
32 A
|
| Rated operational current (Ie) at AC-23A, 230 V |
32 A
|
| Rated operational current (Ie) at AC-23A, 400 V, 415 V |
32 A
|
| Rated operational current (Ie) at AC-23A, 500 V |
30 A
|
| Rated operational current (Ie) at AC-23A, 690 V |
19.8 A
|
| Rated operational current (Ie) at AC-3, 220 V, 230 V, 240 V |
26.4 A
|
| Rated operational current (Ie) at AC-3, 380 V, 400 V, 415 V |
26.4 A
|
| Rated operational current (Ie) at AC-3, 500 V |
23.4 A
|
| Rated operational current (Ie) at AC-3, 660 V, 690 V |
14.7 A
|
| Rated operational current (Ie) at DC-1, load-break switches l/r = 1 ms |
32 A
|
| Voltage per contact pair in series |
60 V
|
| Rated operational current (Ie) at DC-23A, 120 V |
12 A
|
| Number of contacts in series at DC-23A, 120 V |
3
|
| Rated operational current (Ie) at DC-23A, 24 V |
25 A
|
| Number of contacts in series at DC-23A, 24 V |
1
|
| Rated operational current (Ie) at DC-23A, 48 V |
25 A
|
| Number of contacts in series at DC-23A, 48 V |
2
|
| Rated operational current (Ie) at DC-23A, 60 V |
25 A
|
| Number of contacts in series at DC-23A, 60 V |
2
|
| Rated operational power at AC-23A, 220/230 V, 50 Hz |
7.5 kW
|
| Rated operational power at AC-23A, 400 V, 50 Hz |
15 kW
|
| Rated operational power at AC-23A, 500 V, 50 Hz |
18.5 kW
|
| Rated operational power at AC-23A, 690 V, 50 Hz |
15 kW
|
| Rated operational power at AC-3, 380/400 V, 50 Hz |
13 kW
|
| Rated operational power at AC-3, 415 V, 50 Hz |
13 kW
|
| Rated operational power at AC-3, 690 V, 50 Hz |
15 kW
|
| Rated operational voltage (Ue) at AC - max |
690 V
|
| Rated uninterrupted current (Iu) |
32 A
|
| Uninterrupted current |
Rated uninterrupted current Iu is specified for max. cross-section.
|
| Rated conditional short-circuit current (Iq) |
80 kA
|
| Rated short-time withstand current (Icw) |
0.64 kA
640 A, Contacts, 1 second |
| Short-circuit protection rating |
50 A gG/gL, Fuse, Contacts
|
| Rated making capacity up to 690 V (cos phi to IEC/EN 60947-3) |
320 A
|
| Load rating |
2 x Iₑ (with intermittent operation class 12, 25 % duty factor)
1.3 x Iₑ (with intermittent operation class 12, 60 % duty factor) 1.6 x Iₑ (with intermittent operation class 12, 40 % duty factor) |
| Control circuit reliability |
1 failure per 100,000 switching operations statistically determined, at 24 V DC, 10 mA)
|
| Number of auxiliary contacts (change-over contacts) |
0
|
| Number of auxiliary contacts (normally closed contacts) |
0
|
| Number of auxiliary contacts (normally open contacts) |
0
|
| Actuator color |
Black
|
| Actuator type |
Short thumb-grip
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
UV resistance only in connection with protective shield.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Product specifications
