Eaton Moeller series xEffect - FAZ-NA, FAZ-RT MCB. FAZ-RT, 1-pole, tripping characteristic: D, rated current In: 15 A
| Product Name |
Eaton Moeller series xEffect - FAZ-NA, FAZ-RT MCB
|
| Catalog Number |
102149
|
| Model Code |
FAZ-D15/1-RT
|
| EAN |
4015081020256
|
| Product Length/Depth |
105 mm
|
| Product Height |
75.5 mm
|
| Product Width |
17.7 mm
|
| Product Weight |
0.122 kg
|
| Compliances |
RoHS conform
|
| Certifications |
IEC/EN 60947-2
IEC 60947-2 CE marking UL (Category Control Number DIVQ) UL (File No. E235139) Specially designed for North America, suitable as BCPD UL 489, CSA C22.2 No. 5 UL 489 CSA (File No. 204453) CSA-C22.2 No. 5-09 CSA (Class No. 1432-01) North America (UL listed, CSA certified) EN45545-2 IEC 61373 |
| Application |
|
| Number of poles |
Single-pole
|
| Number of poles (total) |
1
|
| Number of poles (protected) |
1
|
| Tripping characteristic |
D
|
| Release characteristic |
D
|
| Amperage Rating |
15 A
|
| Type |
|
| Voltage type |
AC
|
| Voltage rating |
277 V AC / 480 V AC
|
| Voltage rating at DC |
60 V DC
|
| Voltage rating (IEC/EN 60947-2) |
240 V AC / 415 V AC
|
| Voltage rating (UL) |
277 V
|
| Rated operational voltage (Ue) - max |
240 V
|
| Rated insulation voltage (Ui) |
440 V
|
| Rated impulse withstand voltage (Uimp) |
4 kV
|
| Frequency rating - min |
50 Hz
|
| Frequency rating - max |
60 Hz
|
| Rated switching capacity (IEC/EN 60947-2) |
15 kA
|
| Rated short-circuit breaking capacity (IEC 60947-2)- Icu at 230 V |
15 kA
|
| Rated short-circuit breaking capacity (IEC 60947-2)- Icu at 400 V |
15 kA
|
| Selectivity class |
3
|
| Overvoltage category |
III
|
| Pollution degree |
2
|
| Lifespan, electrical |
20000 operations
|
| Direction of incoming supply |
As required
|
| Frame |
45 mm
|
| Enclosure width |
105 mm
|
| Width in number of modular spacings |
1
|
| Built-in depth |
70.5 mm
|
| Mounting width per pole |
17.7 mm
|
| Mounting width |
17.7 mm
|
| Mounting Method |
Top-hat rail IEC/EN 60715
|
| Mounting position |
As required
|
| Degree of protection |
IP20 (IEC)
UL/CSA Type: - IP40 (when fitted) IP20 |
| Terminals (top and bottom) |
Twin-purpose terminals
|
| Connectable conductor cross section (solid-core) - min |
1 mm²
|
| Connectable conductor cross section (solid-core) - max |
25 mm²
|
| Connectable conductor cross section (multi-wired) - min |
1 mm²
|
| Connectable conductor cross section (multi-wired) - max |
25 mm²
|
| Terminal protection |
Finger and hand touch safe, DGUV VS3, EN 50274
|
| Tightening torque |
UL: 2.8 Nm (25 lb-in) for AWG 10 - AWG 8
Max. 2.4 Nm UL: 4 Nm (36 lb-in) for AWG 6 UL: 2.4 Nm (21 lb-in) for AWG 18 - AWG 12 |
| Rated operational current for specified heat dissipation (In) |
15 A
|
| Heat dissipation per pole, current-dependent |
0 W
|
| Equipment heat dissipation, current-dependent |
1.5 W
|
| Static heat dissipation, non-current-dependent |
0 W
|
| Heat dissipation capacity |
0 W
|
| Ambient operating temperature - min |
-25 °C
|
| Ambient operating temperature - max |
75 °C
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
| Current limiting class |
3
|
| Features |
Additional equipment possible
|
| Functions |
Current limiting circuit breaker
|
| Special features |
Ambient temperature hint: a 1 °C increase results in a 0.5% linear reduction of current carrying capacity
|
| Used with |
FAZ-RT
Miniature circuit breaker |
이메일 전송
MyEatonFAQs
제품 사양
