Eaton Touch panel XV-303, 24 V DC, 10.1 Inch, 1 x Ethernet, 1 x RS-232, 1 x RS-485, 1 x CAN, Linux, Capacitive multi touch, PLC
| Product Name |
Eaton XV-303 Touch panel
|
| Catalog Number |
EP-401367
|
| EAN |
7640130100213
|
| Product Length/Depth |
170 mm
|
| Product Height |
39 mm
|
| Product Width |
130 mm
|
| Product Weight |
1.165 kg
|
| Certifications |
UL
UL 61010-2-201 Certified by UL for use in Canada UL File No.: E205091 CUL CE IEC/EN 61000-6-2 IEC/EN 61000-6-4 DNV DNV TAA00000NC |
| Enclosure material |
Insulated material
|
| Fitted with: |
1 x USB host 2.0 (built-in interface)
1 x RS485 (built-in interface) 1 x RS232 (built-in interface) Printer output Color display Message system (incl. buffer and confirmation) Recipes Message indication SW interfaces 1 x Ethernet 10/100 Mbps (built-in interfaces) 1 x CAN (built-in interfaces) |
| Functions |
Additional software components, loadable
Process value representation (output) possible Process default value (input) possible |
| Battery runtime |
Back-up of real-time clock: BR 2330, non-replaceable (soldered)
|
| Degree of protection |
IP20, rear (according to EN 60529-1)
NEMA 12 NEMA 4X |
| Degree of protection (front side) |
IP65
NEMA 12 |
| Fuse type |
Built-in fuse (not accessible)
|
| Lifespan |
50,000 h (Service life of back-lighting)
|
| Model |
Plastic enclosure and glass panel in plastic frame
|
| Mounting method |
Flush mounting
Flush mounting - Inclination from vertical: ±45° (if using natural convection) Flush mounting - Clearance: Width x Height x Depth ≥ 30 mm (1.18") |
| Potential isolation |
Power supply: no
|
| Protection against polarity reversal |
Yes
|
| Product category |
XV-300
|
| RoHs conformity |
Yes
|
| Software |
GALILEO, Visualization software, Engineering
XSOFT-CODESYS-3, PLC-Programming software, Engineering XSOFT-CODESYS-3, Visualization software, Engineering |
| Type |
Control panel with PLC
|
| Voltage type |
DC
|
| Shock resistance |
15 g, 11 ms, Mechanical
|
| Vibration resistance |
5 - 9 Hz, ± 3.5 mm
9 - 60 Hz, ± 0.15 mm 60 - 150 Hz, ± 2 g |
| Air pressure |
795 - 1080 hPa (operation)
|
| Ambient operating temperature - min |
0 °C
|
| Ambient operating temperature - max |
50 °C
|
| Ambient storage temperature - min |
-20 °C
|
| Ambient storage temperature - max |
60 °C
|
| Climatic proofing |
Damp heat, constant, to IEC 60068-2-3
Cold to EN 60068-2-1 Dry heat to IEC 60068-2-2 |
| Environmental conditions |
Condensation: Non-condensing
|
| Operating temperature - max |
50 °C
|
| Relative humidity |
10 - 95 % (non-condensing)
|
| Emitted interference |
According to IEC/EN 61000-6-4
|
| Interference immunity |
According to EN 61000-6-2
|
| Voltage dips |
≤ 10 ms from rated voltage (24 V DC)
5 ms from undervoltage (19.2 V DC) |
| Permissible voltage |
19.2 - 30 V DC, effective (rated operating voltage -20 %/+25 %)
18.0 - 31.2 V DC, absolute with ripple 18 - 31.2 V DC, battery powered (rated operating voltage -25 %/+30 %) 35 V DC (for a duration of < 100 ms) |
| Power consumption |
Max. 18 W
15.5 W 18 W typ. |
| Rated operational voltage |
24 V DC (power-supply - safety extra low voltage)
|
| Supply voltage at DC - min |
19.2 VDC
|
| Supply voltage at DC - max |
30 VDC
|
| Interfaces |
USB 2.0 host (not galvanically isolated)
CAN (not galvanically isolated, 9-pin SUB-D plug, UNC) 10/100 Mbps Ethernet connection RS232 (not galvanically isolated, 9-pin SUB-D plug, UNC) RS485 (not galvanically isolated, 9-pin SUB-D plug, UNC) |
| Number of slots |
1 (for SD-Card)
|
| Protocol |
TCP/IP
EtherNet/IP EtherCAT MODBUS CAN |
| Display contrast ratio |
500:1
|
| Display lighting |
LED
Dimmable via software |
| Display size |
16:9
222.72 x 125.28 mm |
| Display type |
Color display, TFT, anti-glare
TFT Anti-glare tempered glass in plastic bezel |
| Luminance intensity |
400 cd/m²
|
| Number of colors of the display |
16777216
|
| Resolution |
|
| Screen size (diagonal) |
10.1 in
|
| Touch technology |
Capacitive multitouch
Multi-touch touch panel touch sensor Projected Capacitive Touch (PCT) |
| Backup time |
10 years, typ. (time at zero voltage)
|
| Memory |
NVRAM: 128kByte Retain
SD card, Type: SDSC, SDHC (external memory) Flash: 1 GByte SLC DRAM: 512 MByte RAM |
| Memory capacity |
512,000 kByte
|
| Operating system |
Linux
|
| Processor |
ARM Cortex-A9 800 MHz
|
| Equipment heat dissipation, current-dependent Pvid |
18 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
0 W
|
| Rated operational current for specified heat dissipation (In) |
0 A
|
| Static heat dissipation, non-current-dependent Pvs |
18 W
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Please enquire
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Meets the product standard's requirements.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Send email
MyEatonFAQs
Product specifications
