Download document () of 20
Send email
Download
You have exceeded the download limit
Eaton XN ECO gateway for XI/ON I/O system, modbus-TCP
| Product Name |
Eaton XN Gateway
|
| Catalog Number |
152279
|
| EAN |
7640130095298
|
| Product Length/Depth |
129 mm
|
| Product Height |
75 mm
|
| Product Width |
33.5 mm
|
| Product Weight |
0.136 kg
|
| Certifications |
cULus
CE |
| Model Code |
XNE-GWBR-2ETH-MB
|
| Features |
Fieldbus connection over separate bus coupler possible
Fieldbus connection over separate bus coupler possible |
| Fitted with: |
Potential separation
|
| Accessories |
1 x end plate XN-ABPL and 2 x end bracket XN-WEW-32/2-SW included with supplied equipment.
|
| Degree of protection |
IP20
|
| Mounting method |
Rail mounting possible
|
| Type |
XI/ON ECO gateways
|
| Voltage type |
DC
|
| Ambient operating temperature - min |
0 °C
|
| Ambient operating temperature - max |
55 °C
|
| Supply voltage at DC - min |
18 V
|
| Supply voltage at DC - max |
30 V
|
| Addressing |
Address set via DIP switch, BootP, DHCP or PGM
|
| Connection type |
2 x RJ45 (Ethernet Switch), Field bus
Push-In spring-cage terminals, Connection design in TOP direction |
| Data transfer rate |
10/100 MBit/s
|
| Interfaces |
Ethernet (Modbus-TCP protocol), Field bus connection
|
| Protocol |
MODBUS
Other bus systems |
| Explosion safety category for dust |
None
|
| Explosion safety category for gas |
None
|
| Equipment heat dissipation, current-dependent Pvid |
0 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
0 W
|
| Rated operational current for specified heat dissipation (In) |
0 A
|
| Static heat dissipation, non-current-dependent Pvs |
8 W
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Meets the product standard's requirements.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Product specifications
