Eaton Moeller® series Rapid Link 5-m motor cable RASP5
| Product Name |
Eaton Rapid Link Motor cable
|
| Catalog Number |
198281
|
| EAN |
4015081958559
|
| Product Length/Depth |
5160 mm
|
| Product Height |
30 mm
|
| Product Width |
50 mm
|
| Product Weight |
1.7 kg
|
| Certifications |
EN 61684
IEC/EN 60529 DIN VDE 0110 |
| Model Code |
RASP-CM2-5M0
|
| Enclosure material |
Metal
|
| Functions |
Connecting the speed controller to the motor
|
| Material |
Cable: Copper (Cu) flexible according to VDE 0295 Class 6
Outer casing halogen free |
| RAL-number |
2003
|
| Accessory/spare part type |
Cable
|
| Degree of protection |
IP65
|
| Flammability characteristics |
Flame retardance, fire propagation: according to IEC 60332-2
|
| Product Category |
Accessories
|
| Terminal capacity |
4 x 1.5 + 2 x (2 x 0.75) mm² screened, Connection cable
Conductor cross-section, Contact pins: 4 x 1.5 + 4 x 0.75 mm², Metal housing with plug-in connection |
| Used with |
RASP
|
| Environmental resistance |
VDE 0472 Part 803 A/B (Resistance to oils and acids)
|
| Ambient operating temperature - min |
-30 °C
|
| Ambient operating temperature - max |
70 °C
|
| Contact material |
Silver-plated copper
|
| Outer cable diameter |
9 - 13 mm
|
| Permitted bending radius |
10 x outer cable diameter
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Send email
Product specifications
