Download document () of 20
Send email
Download
You have exceeded the download limit
Eaton XIOC Expansion for compact PLC XC-CPU121, 10DI, 8DI/DO(T), 6AI, 2AO
| Product Name |
Eaton XIOC Insulated enclosure
|
| Catalog Number |
290450
|
| EAN |
4015082904500
|
| Product Length/Depth |
100 mm
|
| Product Height |
100 mm
|
| Product Width |
60 mm
|
| Product Weight |
0.195 kg
|
| Certifications |
CE
UL File No.: E135462 EN 50178 UL Shipping classification (DNV, GL, ABS, BV, LR) CSA Class No.: 2252-01 CSA-C22.2 No. 142-M UL/CSA UL508 CSA File No.: 012528 IEC/EN 61131-2 CSA-C22.2 No. 0-M UL Category Control No.: NRAQ CSA |
| Model Code |
XIO-EXT121-1
|
| Electric connection type |
Plug-in connection
|
| Features |
Analog input, current
Analog input, resistor temperature Analog input, voltage Analog output, voltage |
| Functions |
Digital in-/outputs, configurable
Overvoltage protection |
| Admissible range |
20.4 - 28.8 V DC, Rated voltage for the digital outputs
|
| Degree of protection |
IP20
|
| Duty factor |
100 % (Digital outputs)
|
| Operating frequency |
40000 Operations/h at resistive load
|
| Overvoltage category |
II
|
| Pollution degree |
2
|
| Repetition rate |
1 s
|
| Residual current |
0.1 mA (on signal "1" per channel)
|
| Residual ripple |
5 % (digital outputs)
≤ 5 % |
| Resistance |
10 kΩ (impedance)
18.5 - 175.8 Ω (Pt100) |
| Resolution |
|
| Voltage type |
DC
|
| Mounting position |
Horizontal
|
| Shock resistance |
15 g, Mechanical, Shock duration 11 ms
|
| Vibration resistance |
9 - 150 Hz, 1 g constant acceleration
5 - 9 Hz, Amplitude 3.5 mm |
| Air pressure |
795 - 1080 hPa (operation)
|
| Ambient operating temperature - min |
0 °C
|
| Ambient operating temperature - max |
55 °C
|
| Ambient storage temperature - min |
-25 °C
|
| Ambient storage temperature - max |
70 °C
|
| Operating temperature - min |
-200 °C
|
| Operating temperature - max |
200 °C
|
| Relative humidity |
10 - 95 % (non-condensing)
|
| Emitted interference |
According to IEC/EN 61000-6-4
|
| Interference immunity |
According to EN 61000-6-2
|
| Voltage dips |
10 ms
|
| Terminal capacity |
0.5 - 1.0 mm², solid/stranded, Spring-loaded terminal block, 20-pole, B2L 3.5 (Weidmüller)
0.5 - 1.0 mm², solid, Spring-loaded terminal block, 10-pole, BLZF 3.5/180 or BLI/O 3.5/10F with LEDs (Weidmüller) |
| Terminals |
Plug in spring-cage terminals
|
| Inrush current |
Max. 1 A
|
| Peak short-circuit current |
32 A
|
| Power consumption |
Max. 1.68 W
|
| Power loss |
Max. 1.7 W
|
| Rated insulation voltage (Ui) |
500 V
|
| Rated operational current (Ie) |
0.5 A at 24 V AC (state "1")
3.3 mA (on signal "1") |
| Rated operational voltage |
24 V DC
> 15 V DC on 1 signal < 5 V DC on 0 signal |
| Short-circuit tripping current |
0.7 ≤ Ie ≤ 2 per output, For Ra ≤ 10 mΩ, Digital outputs
16 A, Total, Digital outputs |
| Supply voltage at AC, 50 Hz - min |
0 VAC
|
| Supply voltage at AC, 50 Hz - max |
0 VAC
|
| Supply voltage at DC - min |
20.4 VDC
|
| Supply voltage at DC - max |
28.8 VDC
|
| Connection type |
Spring-loaded terminal block, 20-pole, B2L 3.5 (Weidmüller), X1 plug
Spring-loaded terminal block, 10-pole, BLZF 3.5/180 or BLI/O 3.5/10F with LEDs (Weidmüller), X2/X3 plug |
| Accuracy |
≤ ± 1 % (of end of scale), Analog inputs/Analog outputs
≤ ± 2 %, Pt 100 |
| Conversions |
5 ms
|
| Delay time |
Off 24 V → 0 V
20 µs, Digital inputs, On 0 V -> 24 V 20 ms, Digital inputs 250 µs, Digital inputs |
| Input |
6 analog inputs (0 - 10V: 2, 0 - 20 mA: 2 or Pt100: 2)
8 additional digital inputs (can also be used as outputs) 10 digital inputs (6 can also be used as interrupts) |
| Input current |
70 mA
|
| Input current at signal 1 |
0 mA
|
| Input impedance |
50 Ω
200 kΩ |
| Input voltage |
24 V DC (Power supply of local inputs/outputs)
24 V DC (Power supply) 0 - 10 V |
| Lamp load |
5 W (without Rv per channel)
|
| Number of inputs (analog) |
2
|
| Number of inputs (digital) |
X3: 8 (can also be used as outputs)
X2: 9 with plug BLI/O 3.5/10F or 10 with plug BLZF 3.5/180 8 |
| Number of outputs (analog) |
2
|
| Number of outputs (digital) |
8
|
| Output |
Parallel switching
8 Digital Outputs (also usable as inputs) 2 Analog Outputs (0 - 10 V) |
| Output current |
2 A
|
| Output voltage |
U = Uₑ - 1 V (signal 1 at Iₑ = 0.5 A, transistor outputs)
Max. 2.5 V (at signal 0 at external load < 10 MΩ, transistor outputs) 0 - 10 V |
| Rapid counter inputs |
With X3: 8 (can also be used as inputs)
|
| Utilization factor |
1
|
| Explosion safety category for dust |
None
|
| Explosion safety category for gas |
None
|
| Potential isolation |
Between Digital inputs: no
Digital outputs: no X2 Interface: DI4 - DI9: no |
| Protection against polarity reversal |
Yes
|
| Equipment heat dissipation, current-dependent Pvid |
0 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
0 W
|
| Rated operational current for specified heat dissipation (In) |
0 A
|
| Static heat dissipation, non-current-dependent Pvs |
1.7 W
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Meets the product standard's requirements.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Product specifications
