Eaton Moeller® series PKZM4 Circuit-breaker, Ir= 16 - 25 A, Screw terminals, Terminations: IP2X PKZM4-25-CB
| Product Name |
Eaton Moeller® series PKZM4 Motor-protective circuit-breaker
|
| Catalog Number |
132592
|
| Model Code |
PKZM4-25-CB
|
| EAN |
4015081295272
|
| Product Length/Depth |
160 mm
|
| Product Height |
165 mm
|
| Product Width |
55 mm
|
| Product Weight |
1.18 kg
|
| Certifications |
UL Category Control No.: DIVQ
UL 489 CE UL CSA CSA File No.: 165628 UL File No.: E31593 CSA Class No.: 1432-01 CSA-C22.2 No. 5-09 VDE 0660 IEC/EN 60947-2 |
| Catalog Notes |
Not usable as a main switch
|
| Actuator type |
Turn button
|
| Features |
Complete device with protection unit
|
| Functions |
Line and cable protection
For protection of cables and conductors |
| Number of poles |
Three-pole
|
| Connection |
Screw terminals
|
| Lifespan, electrical |
30,000 operations (at 400V, AC-3)
|
| Lifespan, mechanical |
30,000 Operations (Main conducting paths)
|
| Mounting Method |
DIN rail (top hat rail) mounting optional
|
| Operating frequency |
40 Operations/h
|
| Overvoltage category |
III
|
| Pollution degree |
3
|
| Product category |
Motor protective circuit breaker
|
| Protection |
Finger and back-of-hand proof, Protection against direct contact when actuated from front (EN 50274)
|
| Rated impulse withstand voltage (Uimp) |
6000 V AC
|
| Shock resistance |
15 g, Mechanical, According to IEC/EN 60068-2-27, Half-sinusoidal shock 10 ms
|
| Suitable for |
DIN rail (top hat rail) mounting
Feeder and branch circuit as BCPD, (UL/CSA) |
| Temperature compensation |
-5 - 40 °C to IEC/EN 60947, VDE 0660
≤ 0.25 %/K, residual error for T > 40° -25 - 55 °C, Operating range |
| Altitude |
Max. 2000 m
|
| Ambient operating temperature - min |
-25 °C
|
| Ambient operating temperature - max |
55 °C
|
| Ambient operating temperature (enclosed) - min |
-25 °C
|
| Ambient operating temperature (enclosed) - max |
40 °C
|
| Ambient storage temperature - min |
-40 °C
|
| Ambient storage temperature - max |
80 °C
|
| Climatic proofing |
Damp heat, cyclic, to IEC 60068-2-30
Damp heat, constant, to IEC 60068-2-78 |
| Terminal capacity (flexible with ferrule) |
1 x (0.75 - 16) mm², ferrule to DIN 46228
2 x (0.75 - 16) mm² |
| Terminal capacity (flexible with ferrule AWG) |
14 - 8
|
| Terminal capacity (solid) |
2 x (0.75 - 16) mm²
1 x (0.75 - 16) mm² |
| Terminal capacity (solid/stranded AWG) |
14 - 6
|
| Stripping length (main cable) |
14 mm
|
| Tightening torque |
3.3 Nm, Screw terminals, Main cable
|
| Rated frequency - min |
50 Hz
|
| Rated frequency - max |
60 Hz
|
| Rated operational current (Ie) |
25 A
|
| Rated operational voltage (Ue) - min |
600 V
|
| Rated operational voltage (Ue) - max |
690 V
|
| Rated uninterrupted current (Iu) |
25 A
|
| Short-circuit current |
60 kA DC, up to 250 V DC, Main conducting paths
|
| Short-circuit current rating (UL 489 CSA 22.2-5.09) |
65 kA, 480 Y/277 V, SCCR (UL/CSA)
22 kA, 600 Y/347 V, SCCR (UL/CSA) |
| Short-circuit release |
Basic device fixed 15.5 x Iu
± 20% tolerance 388 A, Irm |
| Rated short-circuit breaking capacity Icu at 400 V AC |
65 kA
|
| Number of auxiliary contacts (change-over contacts) |
0
|
| Number of auxiliary contacts (normally closed contacts) |
0
|
| Number of auxiliary contacts (normally open contacts) |
0
|
| Overload release current setting - min |
0 A
|
| Overload release current setting - max |
25 A
|
| Equipment heat dissipation, current-dependent Pvid |
14.7 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
4.9 W
|
| Rated operational current for specified heat dissipation (In) |
25 A
|
| Static heat dissipation, non-current-dependent Pvs |
0 W
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Send email
Product specifications
