Download document () of 20
Send email
Download
You have exceeded the download limit
Eaton Moeller® series M22 Combination of contact element and self-monitoring contact element M22-K01SMC10 with screw terminals, M22-A mounting adapter, and M22-XSMC signaling contact actuator, 2 N/O, 2 NC
| Product Name |
Eaton Moeller® series M22 Accessory Contact element
|
| Catalog Number |
173027
|
| Model Code |
M22-AK12SMC10
|
| EAN |
4015081696185
|
| Product Length/Depth |
40.2 mm
|
| Product Height |
32.5 mm
|
| Product Width |
47 mm
|
| Product Weight |
0.047 kg
|
| Certifications |
UL File No.: E340491
CSA-C22.2 No. 14-05 CSA Class No.: 3211-03 CE CSA UL CSA-C22.2 No. 94-91 UL Category Control No.: NISD CSA File No.: 012528_C_000 IEC 60947-5-1 IEC/EN 60947-5 UL 508 |
| Electric connection type |
Screw connection
|
| Degree of protection |
IP20
|
| Model |
Top mounting
|
| Mounting method |
Front fastening
|
| Operating torque |
0.8 Nm
|
| Overvoltage category |
III
|
| Pollution degree |
3
|
| Rated impulse withstand voltage (Uimp) |
6000 V AC
|
| Ambient operating temperature - min |
-25 °C
|
| Ambient operating temperature - max |
70 °C
|
| Ambient storage temperature - min |
-25 °C
|
| Ambient storage temperature - max |
85 °C
|
| Climatic proofing |
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30 |
| Terminal capacity (flexible with ferrule) |
0.5 - 1.5 mm²
|
| Terminal capacity (solid) |
0.75 - 2.5 mm²
|
| Terminal capacity (stranded) |
0.5 - 2.5 mm²
|
| Rated insulation voltage (Ui) |
500 V
|
| Rated operational current (Ie) at AC-15, 115 V |
6 A
|
| Rated operational current (Ie) at AC-15, 220 V, 230 V, 240 V |
6 A
|
| Rated operational current (Ie) at AC-15, 380 V, 400 V, 415 V |
4 A
|
| Rated operational current (Ie) at AC-15, 500 V |
2 A
|
| Rated operational current (Ie) at DC-13, 110 V |
0.6 A
|
| Rated operational current (Ie) at DC-13, 220 V, 230 V |
0.3 A
|
| Rated operational current (Ie) at DC-13, 24 V |
3 A
|
| Rated operational current (Ie) at DC-13, 42 V |
1.7 A
|
| Rated operational current (Ie) at DC-13, 60 V |
1.2 A
|
| Rated operational current (Ie) at DC-13, 500 V |
0.1 A
|
| Short-circuit protection |
PKZM0-10/FAZ-B6/1, Contacts, Max. short-circuit protective device, Fuseless
|
| Short-circuit protection rating |
Max. 10 A gG/gL, Fuse, Contacts
|
| Connection to SmartWire-DT |
No
|
| Connection type |
Front fixing
Screw connection |
| Actuating force - max |
15 N
|
| Force for positive opening - min |
0 N
|
| Number of contacts (change-over contacts) |
0
|
| Number of contacts (normally closed contacts) |
2
|
| Number of contacts (normally open contacts) |
1
|
| Equipment heat dissipation, current-dependent Pvid |
0 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
0.11 W
|
| Rated operational current for specified heat dissipation (In) |
6 A
|
| Static heat dissipation, non-current-dependent Pvs |
0 W
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Product specifications
