262152

Eaton XC Modular PLC, 24 V DC, 8DI, 6DO, RS232, CAN, 64kB

產品規格

產品諮詢

規格資源

常用規格

Product Name	Eaton XC Modular PLC
Catalog Number	262152
Product Length/Depth	100 mm
Product Height	100 mm
Product Width	60 mm
Product Weight	0.28 kg
Certifications	CSA Class No.: 2252-01 CSA-C22.2 No. 0-M UL File No.: E135462 UL IEC/EN 61131-2 CSA CSA-C22.2 No. 142-M UL Category Control No.: NRAQ UL508 CE CSA File No.: 012528 EN 50178 EAC

特色 & 功能

Features	Mains overvoltage protection (power supply) Asynchronous, cyclic, acyclic PDO types (CANopen®) Expandable with XI/OC expansions Short-circuit protection (power supply) Mains filter (power supply)
Fitted with:	Real time clock
Functions	Additional program memory possible Overvoltage protection
Processor	Infineon C164

一般

Accessories	Order terminal clamps, module rack and battery separately.
Battery runtime	5 years typ.
Connection type	Plug-in terminal block Plug-in terminal block, CANopen® RJ45, Ethernet
Degree of protection	IP20
Model	Modular
Mounting method	Wall mounting/direct mounting Rail mounting possible
Overvoltage category	II
Pollution degree	2
Potential isolation	Power supply of local inputs/outputs (24 V/0 V) against CPU voltage: yes CANopen®: yes
Rated insulation voltage (Ui)	500 V
Residual ripple	≤ 5 %
Voltage type	DC

環境條件，機械

Mounting position	Horizontal
Shock resistance	15 g, Mechanical, Shock duration 11 ms
Vibration resistance	57 - 150 Hz, ± 1.0 g 10 - 57 Hz, ± 0.075 mm

天候環境狀況

Air pressure	795 - 1080 hPa (operation)
Ambient operating temperature - min	0 °C
Ambient operating temperature - max	55 °C
Ambient storage temperature - min	-25 °C
Ambient storage temperature - max	70 °C
Relative humidity	10 - 95 % (non-condensing)

電磁相容性

Emitted interference	Class A (according to EN 50081-2)
Interference immunity	According to EN 50081-2

端子容量

Terminal capacity (flexible with ferrule)	0.5 - 1.5 mm², Screw terminals
Terminal capacity (flexible)	0.34 - 1.0 mm², Spring-loaded terminals
Terminal capacity (solid)	0.14 - 1.0 mm², Spring-loaded terminals 0.5 - 2.5 mm², Screw terminals

電源供應器

Input power	26 W
Input voltage	24 V DC (Power supply of local inputs/outputs) 24 V DC (Power supply)
Input current	3.5 mA (per channel at nominal voltage, Digital inputs)
Output current	3.2 A
Output voltage	5 V DC (signal module)
Power loss	Normally 85 mW 6 W
Repetition rate	1 s
Residual ripple	≤ 5 %
Supply voltage	20.4 - 28.8 V DC
Supply voltage at AC, 50 Hz - min	0 VAC
Supply voltage at AC, 50 Hz - max	0 VAC
Supply voltage at DC - min	20.4 VDC
Voltage dips	10 ms
Supply voltage at DC - max	28.8 VDC

通訊

Bus termination	External, CANopen®
Connection type	Plug-in terminal block Plug-in terminal block, CANopen® RJ45, Ethernet
Cycle time	< 0.5 ms, for 1 k of instructions (Bit, Byte), memory
Data transfer rate	57.6 kBit/s, Serial interface (RS232) without handshake lines 0,5 MBit/s, CANopen®
Interfaces	RS232 (built-in) CANopen®/easyNet (built-in)
Memory	4 kByte Retain Memory 64 kByte (User memory) 64 kByte Program data code, optional extension 4 kByte Marker Memory 64 kByte Program memory code, optional extension
Number of modules	Max. 126 (CANopen)
Operating mode	Watchdog
Protocol	SUCONET CAN CANopen® (To DS 301 V4) Other bus systems PROFIBUS MODBUS

輸入/輸出

Delay time	0.1 ms typ., Digital inputs 24 V DC, Delay time from 1 to 0, Debounce OFF 0.1 ms typ., Output delay, On -> Off 0.1 ms typ., Digital inputs, Delay time from 0 to 1, Debounce OFF
Duty factor	100 %, Digital outputs
Input current	3.5 mA (per channel at nominal voltage, Digital inputs)
LED indicator	Status indication of digital inputs: LED
Limit value type 1	Low: < 5 V DC High: > 15 V DC
Making/breaking delay	0.1 ms
Number of channels	6
Number of inputs (analog)	0
Number of inputs (digital)	8
Number of outputs	6 (transistor outputs)
Number of outputs (analog)	0
Number of outputs (digital)	6
Number of relay outputs	0
Rated operational current (Ie)	0.5 A at AC-3, 230 V
Signal range	19.2 - 30 V DC (Power supply of local inputs/outputs, note polarity)
Switching capacity	IEC/EN 60947-5-1, utilization category DC-13, Digital outputs
Utilization factor	1 (Inductive load to EN 60947-5-1, Without external suppressor circuit, T0.95 = 1 ms, R = 48 Ω, L = 16 mH)

安全

Explosion safety category for gas	None
Potential isolation	Power supply of local inputs/outputs (24 V/0 V) against CPU voltage: yes CANopen®: yes
Protection against polarity reversal	Yes, for AS-Interface Yes
Explosion safety category for dust	None

系統

Memory	4 kByte Retain Memory 64 kByte (User memory) 64 kByte Program data code, optional extension 4 kByte Marker Memory 64 kByte Program memory code, optional extension
Memory capacity	64 kByte

設計驗證

Equipment heat dissipation, current-dependent Pvid	0.08 W
Heat dissipation capacity Pdiss	0 W
Heat dissipation per pole, current-dependent Pvid	0 W
Rated operational current for specified heat dissipation (In)	0 A
Static heat dissipation, non-current-dependent Pvs	6 W
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Meets the product standard's requirements.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.