Download document () of 20
Send email
Download
You have exceeded the download limit
Eaton Moeller® series PKE65 System-protective circuit-breaker, Complete device with standard knob, 15 - 36 A, 36 A, With overload release
| Product Name |
Eaton Moeller® series PKE System-protective circuit-breaker
|
| Catalog Number |
168973
|
| EAN |
4015081654642
|
| Product Length/Depth |
187 mm
|
| Product Height |
162 mm
|
| Product Width |
55 mm
|
| Product Weight |
1.427 kg
|
| Certifications |
VDE 0660
IEC/EN 60947 |
| Catalog Notes |
This is a product for Environment A (Industrial). In environment B (household) this device may cause undesirable radio interference. In this case the user may be obliged to take appropriate measures.
|
| Model Code |
PKE65/XTUWCP-36
|
| Features |
Complete device with protection unit
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| Fitted with: |
Standard knob
|
| Operating frequency |
60 Operations/h
|
| Pollution degree |
3
|
| Mounting Method |
DIN rail (top hat rail) mounting optional
|
| Climatic proofing |
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30 |
| Actuator type |
Turn button
|
| Adjustment range short-term delayed short-circuit release - max |
288 A
|
| Adjustment range short-term delayed short-circuit release - min |
75 A
|
| Adjustment range undelayed short-circuit release - max |
1008 A
|
| Adjustment range undelayed short-circuit release - min |
1008 A
|
| Ambient operating temperature - max |
55 °C
|
| Ambient operating temperature - min |
-25 °C
|
| Ambient operating temperature (enclosed) - max |
40 °C
|
| Ambient operating temperature (enclosed) - min |
-25 °C
|
| Ambient storage temperature - max |
80 °C
|
| Ambient storage temperature - min |
-40 °C
|
| Equipment heat dissipation, current-dependent Pvid |
6.6 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
2.2 W
|
| Rated impulse withstand voltage (Uimp) |
6000 V AC
|
| Altitude |
Max. 2000 m
|
| Device construction |
Built-in device fixed built-in technique
|
| Connection |
Screw terminals
|
| Electrical connection type of main circuit |
Screw connection
|
| Current flow times - min |
Note: Going below the minimum current flow time can cause overheating of the load (motor).
900 (Class 15) AC-4 cycle operation, Main conducting paths For all combinations with an SWD activation, you need not adhere to the minimum current flow times and minimum cut-out periods. 500 (Class 5) AC-4 cycle operation, Main conducting paths 1000 (Class 20) AC-4 cycle operation, Main conducting paths 700 (Class 10) AC-4 cycle operation, Main conducting paths |
| Lifespan, mechanical |
30,000 Operations (Main conducting paths)
|
| Overvoltage category |
III
|
| Cut-out periods - min |
≤ 500 ms, main conducting paths, AC-4 cycle operation
|
| Degree of protection |
IP20
Terminals: IP00 |
| Number of poles |
Three-pole
|
| Lifespan, electrical |
50,000 operations (at 400V, AC-3)
|
| Shock resistance |
15 g, Mechanical, According to IEC/EN 60068-2-27, Half-sinusoidal shock 10 ms
|
| Functions |
Overload release
System protection Line and cable protection |
| Position of connection for main current circuit |
Other
|
| Number of auxiliary contacts (change-over contacts) |
0
|
| Number of auxiliary contacts (normally closed contacts) |
0
|
| Number of auxiliary contacts (normally open contacts) |
0
|
| Overload release current setting - max |
36 A
|
| Overload release current setting - min |
15 A
|
| Rated frequency - max |
60 Hz
|
| Rated frequency - min |
50 Hz
|
| Rated operational voltage (Ue) - max |
690 V
|
| Rated operational voltage (Ue) - min |
690 V
|
| Rated operational current for specified heat dissipation (In) |
36 A
|
| Rated uninterrupted current (Iu) |
36 A
|
| Static heat dissipation, non-current-dependent Pvs |
0 W
|
| Stripping length (main cable) |
14 mm
|
| Product category |
Circuit-breaker PKE
|
| Protection |
Finger and back-of-hand proof, Protection against direct contact when actuated from front (EN 50274)
|
| Rated short-circuit breaking capacity Icu at 400 V AC |
50 kA
|
| Rated short-circuit breaking capacity Ics at 400 V AC |
12 kA
|
| Rated short-circuit breaking capacity Icu at 440 V AC |
45 kA
|
| Rated short-circuit breaking capacity Ics at 440 V AC |
11 kA
|
| Rated short-circuit breaking capacity Icu at 500 V AC |
15 kA
|
| Rated short-circuit breaking capacity Ics at 500 V AC |
3 kA
|
| Rated short-circuit breaking capacity Icu at 690 V AC |
5 kA
|
| Rated short-circuit breaking capacity Ics at 690 V AC |
1 kA
|
| Suitable for |
DIN rail (top hat rail) mounting
|
| Short-circuit release |
± 20% tolerance, Trip blocks
Basic device fixed 15.5 x Iu, Trip Blocks Delayed approx. 60 ms, Trip blocks Trip block adjustable 5 - 8 x Ir |
| Terminal capacity (solid) |
1 x (0.75 - 16) mm²
2 x (0.75 - 16) mm² |
| Rated operational current (Ie) |
36 A
|
| Temperature compensation |
-25 - 55 °C, Operating range
-5 - 40 °C to IEC/EN 60947, VDE 0660 |
| Tightening torque |
1 Nm, Screw terminals, Control circuit cables
3.3 Nm, Screw terminals, Main cable |
| Terminal capacity (flexible with ferrule) |
1 x (0.75 - 35) mm², ferrule to DIN 46228
2 x (0.75 - 25) mm², ferrule to DIN 46228 |
| Power loss |
6.6 W
|
| Resistance per pole |
2.2 mΩ
|
Product specifications
