Download document () of 20
Send email
Download
You have exceeded the download limit
This product has been discontinued and is no longer available.
Lighting control modules are a new range of intelligent marshalling boxes and accessories offering a simple and easy to configure system with all the components necessary to distribute power, detector inputs and switch commands to the connected luminaires.
Energy conservation and the resulting cost savings are key drivers in the increasing demand for these types of lighting controls. The range includes a series of programmable Lighting control modules and a choice of PIR and microwave detectors each with photocells for daylight harvesting. A building's infrastructure is the foundation of any business - maximising the functional use of space, increasing energy efficiency and keeping people safe are all critical considerations.
| Cat No | Description |
| Lighting Control Module | |
| LCMB12W | LCM 12 way 6 channel Switching only |
| LCMB12WD | LCM 12 way 6 channel Digital Dimming |
| LCMB12WB | LCM 12 way 6 channel Switching and BUS connection |
| LCMB12WDB | LCM 12 way 6 channel Digital Dimming and BUS connection |
| Cat No | Description |
| Sensors for the LCM | |
| LCMBMS | Microwave detector and Photocell surface/ semi-recessed mount |
| LCMBMF | Microwave detector and Photocell flush mount |
| LCMBPIRF | PIR detector and Photocell flush mount |
| LCM Accessories | |
| LCMPL3RJ45 | Patch Lead 3m CAT5 c/w RJ45 connectors |
| LCMPL5RJ45 | Patch Lead 5m CAT5 c/w RJ45 connectors |
| LCM6PGL | 6-Pole Black/Grey GST latching Male connector |
| LCMCP | LCM switch input connectors - pack of 5 |
| Marshalling Boxes | There are 4 marshalling box variants offering different functionality and compatibility with the range of accessories. LCMB12W is the switching only variant that offers configurable channel outputs and is ideal for areas where a simple light level offset and time delay provides sufficient control of luminaires. LCMB12WD is the digital dimming variant, compatible with both DSI and DALI ballasts, this allows daylight harvesting to trigger dimming to regulate the luminaire output relative to the commissioned light level setting. LCMB12WB has an integrated communication BUS interface to facilitate connection to a BUS loop enabling interaction with a wider lighting control system. (This variant does not have the dimming function) The BUS has mains voltage protection via a replaceable BUS card to prevent damage to the remainder of the box should mains be applied to the BUS loop in error. (The recommended cable for the BUS is 1.5mm² unscreened twisted pair). LCMB12WDB combines both the dimming functionality and communication BUS interface to produce the most versatile marshalling box option. If two or more LCMs are to be linked via a BUS loop then a BUS power supply will be needed. For BUS power supply options please refer to page 343. The marshalling boxes have a modular construction and can be upgraded to add the BUS or Dimming functionality described above if required. |
| Construction | Robust VO rated polycarbonate housing finished grey with dedicated mounting points at 240mm centres and numerous cable entry points |
| Luminaire Connections | 12 x 6-pole luminaire connections which are split across 6 different channels as follows: 2 channels control 3 luminaire connections each 2 channels control 2 luminaire connections each 2 channels control 1 luminaire connector each The maximum recommended load per channel is 6A (with a maximum recommended total load of 16A for the box). The recommended maximum number of digital dimming ballasts per channel is 8, with a maximum of 20 digital dimming ballasts for the box in total. Luminaires can be supplied fitted with corresponding 6-pole connectors that will lock to the marshalling box, ensuring positive mechanical connection and prevents accidental disconnection. |
| Detector Inputs | Each box is fitted with 5 x SELV RJ45 detector input sockets, this allows quick and simple connection of the detectors via RJ45 patch leads (available as separate accessories), minimising install time and removing the chance of incorrect hardwiring. The maximum recommended cable length between a detector and the box is 100m. |
| Switch Inputs | Each box is fitted with 5 x 3-pole SELV switch input sockets. These connections are a pluggable terminal block with a common and two returns with normally open contacts. The function of each switch input can be attributed to one or more of the luminaire channels. These inputs have the potential to allow up to 10 functions to be attributed to them and could be used to create scene setting functionality. The recommended cable for use with the SELV switch inputs is 3-core 0.75mm² 300/500V to CMA ref 3183Y (or 3183B for LSOH cable). The maximum recommended cable length between a switch device and the box is 100m. Each LCM is supplied with 2 switch input plugs. A pack of 5 is available if more are needed (LCMCP). |
| Mains supply | The box requires a 230/240V 50Hz electrical supply. The mains input terminal is 4-pole with cable capacity of 2 x 2.5mm² or 1 x 4.0mm² per termination. The box is supplied with a link between the permanent and switched live terminals, this can be removed where a permanent live supply is to be connected for emergency luminaires. The permanent live input is common to all channels so a single key switch will drop the permanent supply to all 6 channels. |
| Dimensions | Depth 50mm (108mm with 6-pole plug and lead fitted) Length 315mm (361mm including fixing feet) Width 205mm Weight 1.85kg Fixing centres 340mm |
Support from Eaton
