Download document () of 20
Send email
Download
You have exceeded the download limit
Eaton SWD4 SmartWire-DT splitter IP67, from M12 plug to two M8 sockets, 4-Pole, pin 2
| Product Name |
Eaton SWD4 Accessory Splitter
|
| Catalog Number |
174706
|
| EAN |
4015081711925
|
| Product Length/Depth |
47 mm
|
| Product Height |
14.7 mm
|
| Product Width |
31.4 mm
|
| Product Weight |
0.03 kg
|
| Certifications |
CSA
UL |
| Catalog Notes |
not relevant
|
| Model Code |
SWD4-SP-4082
|
| Functions |
For splitting an M12 I/O connection's I/O signals
|
| Degree of protection |
IP67 (according to IEC/EN 60529, EN 50178, VBG 4)
IP67 |
| Product category |
SmartWire-DT accessories
|
| Type |
Splitter with IP67 degree of protection, M12 plug into two 4 pole M8 sockets with I/O signal on pin 2
|
| Mounting position |
As required
|
| Air pressure |
795 - 1080 hPa (operation)
|
| Ambient operating temperature - min |
-25 °C
|
| Ambient operating temperature - max |
90 °C
|
| Ambient storage temperature - min |
-40 °C
|
| Ambient storage temperature - max |
90 °C
|
| Climatic proofing |
Damp heat, constant, to IEC 60068-2-3
Dry heat to IEC 60068-2-2 |
| Environmental conditions |
Condensation: permissible
|
| Operating temperature - min |
-25 °C
|
| Operating temperature - max |
90 °C
|
| Power loss |
0 W
|
| Connection to SmartWire-DT |
Yes
|
| Connection type |
2 * M8 sockets, 4-pin, I/O on connection pin 2
Connection 1: M12 Plug (A-keyed) |
| Heat dissipation capacity Pdiss |
0 W
|
| Static heat dissipation, non-current-dependent Pvs |
0 W
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Meets the product standard's requirements.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Product specifications
