Eaton Moeller series xEffect - FRBm6/M RCBO - residual-current circuit breaker with overcurrent protection. RCD/MCB, 10A, 300mA, MCB trip type B, 1-ph+N, RCCB trip type: AC
| Product Name |
Eaton Moeller series xEffect - FRBm6/M RCBO - residual-current circuit breaker with overcurrent protection
|
| Catalog Number |
170600
|
| EAN |
4015081671885
|
| Product Length/Depth |
80 mm
|
| Product Height |
75 mm
|
| Product Width |
35 mm
|
| Product Weight |
0.187 kg
|
| Compliances |
CE Marked
RoHS conform |
| Certifications |
CE
EN45545-2 IEC 61373 |
| Model Code |
FRBMM-B10/1N/03
|
| Application |
Switchgear for industrial and advanced commercial applications
|
| Product range |
FRBmM
|
| Basic function |
Combined RCD/MCB devices
|
| Number of poles |
Single-pole + N
|
| Number of poles (protected) |
1
|
| Number of poles (total) |
2
|
| Release characteristic |
B
|
| Rated current |
10 A
|
| Fault current rating |
0.3 A
|
| Sensitivity type |
AC current sensitive
|
| Type |
RCBO
|
| Voltage type |
AC
|
| Voltage rating |
240 V - 240 V
|
| Rated operational voltage (Ue) - max |
240 V
|
| Rated insulation voltage (Ui) |
500 V
|
| Rated impulse withstand voltage (Uimp) |
4 kV
|
| Rated fault currents of product range |
10, 30, 100, 300 MilliAmpere
|
| Impulse withstand current |
Partly surge-proof, 250 A
|
| Frequency rating |
50 Hz
|
| Leakage current type |
AC
|
| Rated switching capacity |
10 kA
|
| Rated switching capacity (IEC/EN 61009) |
10 kA
|
| Rated short-circuit breaking capacity (EN 60947-2) |
15 kA
|
| Rated short-circuit breaking capacity (EN 61009) |
10 kA
|
| Rated short-circuit breaking capacity (EN 61009-1) |
10 kA
|
| Rated short-circuit breaking capacity (IEC 60947-2) |
15 kA
|
| Surge current capacity |
0.25 kA
|
| Disconnection characteristic |
Undelayed
|
| Tripping |
Non-delayed
|
| Overvoltage category |
III
|
| Pollution degree |
2
|
| Width in number of modular spacings |
2
|
| Built-in depth |
75.5 mm
|
| Mounting Method |
DIN rail
|
| Degree of protection |
IP20
|
| Connectable conductor cross section (solid-core) - min |
1 mm²
|
| Connectable conductor cross section (solid-core) - max |
25 mm²
|
| Connectable conductor cross section (multi-wired) - min |
1 mm²
|
| Connectable conductor cross section (multi-wired) - max |
25 mm²
|
| Rated operational current for specified heat dissipation (In) |
10 A
|
| Heat dissipation per pole, current-dependent |
0 W
|
| Equipment heat dissipation, current-dependent |
2.3 W
|
| Static heat dissipation, non-current-dependent |
0 W
|
| Heat dissipation capacity |
0 W
|
| Ambient operating temperature - min |
-25 °C
|
| Ambient operating temperature - max |
40 °C
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Send email
Product specifications
