We make what matters work*
- Product Overview
- Back-up Power UPS, Surge, and Data Center Solutions
- Clutches and brakes
- Conduit, cable & wire management
- Differentials and traction control
- Ducting solutions
- Electrical circuit protection
- Electronic components
- eMobility and vehicle electrical components
- Enclosures
- Energy storage systems
- Engine solutions
- Filtration solutions
- Fuel systems, emissions and components
- Golf grips
- Hose, tubing, fittings and connectors
- Industrial controls, drives, automation & sensors
- Lighting and controls
- Low-voltage power distribution & control systems
Serial Number Verified :
Authenticated: ![]()
The product is verified as being authentic; however, this does not guarantee the condition or fit for purpose of the product.
The product is verified as being authentic; however, this does not guarantee the condition or fit for purpose of the product.
Bussmann series UL Surge Protective Devices
Bussmann series surge protective solutions are designed with maximum flexibility for facility-wide protection and deliver superior surge protection using MOV thermal disconnect technology for complete system protection in light commercial and residential applications.
Photo is representative
Core features
UL Type 1
- Type 1 UL 1449 4th Edition Listed SPDs are easily selected and installed on the loadside or lineside of the service entrance overcurrent protective device Voltage specific models precisely match and protect electrical systems and equipment better than “one-size-fits-all” SPD
- Thermal disconnect technology eliminates the need for additional fusing
- Compact UV resistant NEMA 4X enclosure for indoor or outdoor installation
- easyID™ LED status indicator provides surge protection status at a glance
DIN-Rail
- Comprehensive High SCCR surge protection solutions for North American UL 508A applications
- Modular DIN-Rail design with module rejection feature makes it easy to identify, install and maintain
- easyID™ local visual indication and standard remote contact signaling make status monitoring simple
- IP20 finger-safe design improves electrical safety
In-line
- UL 497B Listed to protect equipment and wiring against the effects of excessive currents caused by lightning
- RJ45 / Ethernet data cable and universal 4-pole versions available for popular data signal applications
- DIN-Rail mount makes installation easy
- Data signal SPDs complement SurgePOD™ Type 1 and DIN-Rail UL AC/DC power and control surge product lines for comprehensive system protection
Helpful Apps & Resources
Specifications
Download Links
Application notes
-
Overview of the National Electrical code requirements for surge protection and a handy guide for selecting the appropriate Bussmann series SPD for an application.(PDF 1 MB, 08/09/2021)
-
Application guide for understanding and selecting UL Listed and Recognized Type 1, 2 and 4 power and control SPDs and UL 497B data signal SPDs(PDF 8 MB, 08/09/2021)
Drawings
-
2-D Drawing of the SurgePOD Pro Type 1 surge protective device covering all part numbers.(PDF 157 KB, 08/09/2021)
-
Drawings for Bussmann series SPD DIN Rail Replacement modules (STEP file)(STP 909 KB, 12/12/2019)
-
Drawings for Bussmann series Type 2, 1-Pole LV Power (DWG file)(DWG 1 MB, 12/12/2019)
-
Drawings for Bussmann series Type 2, 1-Pole LV Power (STEP file)(STEP 8 MB, 12/12/2019)
-
Drawings for the Bussmann series Type 2, 1-Pole LV Power DIN-Rail surge protective device catalog numbers BSPG1255NPE(R), BSPM1275TN(R), BSPM1320TN(R), BSPM1385TN(R), BSPM1440TN(R), BSPM1600TN(R), BSPG1230WE(R), BSPM1400WE(R), BSPM1690WE(R), BSPM175WE(R), SPM1120S2G(R), BSPM1240S2G(R), BSPM1347S2G(R), BSPM1A150D200LV(R), BSPM1A275D350LV(R), BSPM1A320D420LV(R), BSPM1A385D500LV(R), BSPM1A440D585LV(R), BSPM1A48D60LV(R), BSPM1A600D600LV(R), BSPM1A75D100LV(R).(PDF 244 KB, 08/09/2021)
-
Drawings for Bussmann series Type 3, 2-Pole LV Control (DWG file)(DWG 1 MB, 12/12/2019)
-
Drawings for Bussmann series Type 3, 2-Pole LV Control (STEP file)(STEP 7 MB, 12/12/2019)
-
PDF CAD Drawings of the Bussmann DIN-Rail surge protective device catalog numbers BSPH2A24D24LV(R), BSPH2A48D48LV(R), BSPH2A60D60LV(R), BSPH2A150D150LV(R), BSPH2A230D230LV(R).(PDF 240 KB, 08/09/2021)
Installation instructions
-
Installation instructions for the Bussmann series BSPA surge protective device.(PDF 1 MB, 08/09/2021)
-
Quick start guide for the Bussmann series BSPA surge protective device.(PDF 787 KB, 08/09/2021)
-
Installation instructions for all configurations of the Type 1and Type 2 BSPD high surge capacity surge protective devices.(PDF 2 MB, 08/09/2021)
-
Installation instructions for the 2-pole UL control voltage surge protective devices covering system voltages from 30-60Vac and 30-60Vdc.(PDF 4 MB, 08/09/2021)
-
Step-by-step installation instructions for the NEMA 4x UL Type 1 SurgePOD PRO UL surge protective devices for single-phase, split-phase, WYE and Delta systems.(PDF 1 MB, 08/09/2021)
-
Surge Protective Device (SPD) Master Specs for the specification of surge protective devices covering Type 1 and Type 2 DIN-Rail devices and data signal SPDs for coaxial cable, RJ45 Ethernet and universal (twisted pair).(PDF 387 KB, 12/12/2019)
-
DIN-Rail Mount RJ45/Ethernet Cable Data Signal Surge Protective Device Installation Sheet no. 3A1979DIN-Rail Mount RJ45/Ethernet Cable Data Signal Surge Protective Device Installation Sheet no. 3A1979(PDF 499 KB, 08/09/2021)
-
Universal 4-Wire DIN-Rail Data Signal Surge Protective Device Installation Sheet # 3A1980 for 5-48V Versions(PDF 570 KB, 08/09/2021)
Product specification guides
-
UL Type 1 and 2 surge protective devices in NEMA 4X enclosures with from 50 kA to 200 kA surge current capacity available for single- and split-phase, and three-phase Wye and Delta systems.(PDF 682 KB, 08/09/2021)
-
Features and benefits of the Bussmann series high surge capacity SPDs for switchboards and large panelboards with surge capacities up to 400kA for Delta and Wye systems up to 600volts in NEMA1 or NEMA 4X enclosures.(PDF 1 MB, 08/09/2021)
-
Features and benefits of the Bussmann series UL Listed open Type 1 high SCCR 1, 2-, 3- and 4-pole DIN-Rail mount surge protective devices.(PDF 1 MB, 08/09/2021)
-
Features and benefits of the Bussmann series of UL low voltage power and control surge protective devices(PDF 227 KB, 08/09/2021)
-
Features and benefits of the SurgePOD PRO UL Listed Type 1 1449 4th Edition surge protective device for 240V split-phase electrical systems (typical residential and light commercial applications)(PDF 1 MB, 08/09/2021)
-
SurgePOD Pro UL Type 1 Surge Protective Device for Light Commercial and Residential Applications.(PDF 1 MB, 08/09/2021)
-
Data Signal Surge Protective Devices Product Profile for BNC/Coaxial Cable, RJ45/Ethernet Cable and Universal 4-Wire DIN-Rail Mount Products, Product Profile # 10035(PDF 398 KB, 08/09/2021)
Technical data sheets
-
The Bussmann™ series one-pole DIN-Rail UL Listed open Type 1 surge protective devices feature a high 200 kA SCCR. Replaceable arrestor modules are mechanically coded with the base to ensure against installing an incorrect replacement. The unique module locking system fixes the module to the base, and allows it to be easily replaced without tools by simply depressing the release buttons.(PDF 854 KB, 08/09/2021)
-
The Bussmann™ series two-pole DIN-Rail UL Listed open Type 1 surge protective devices feature a high 200 kA SCCR. Replaceable arrestor modules are mechanically coded with the base to ensure against installing an incorrect replacement. The unique module locking system fixes the module to the base, and allows it to be easily replaced without tools by simply depressing the release buttons.(PDF 996 KB, 08/09/2021)
-
The Bussmann™ series three-pole DIN-Rail UL Listed open Type 1 surge protective devices feature a high 200 kA SCCR. Replaceable arrestor modules are mechanically coded with the base to ensure against installing an incorrect replacement. The unique module locking system fixes the module to the base, and allows it to be easily replaced without tools by simply depressing the release buttons.(PDF 1 MB, 08/09/2021)
-
The Bussmann™ series four-pole DIN-Rail UL Listed open Type 1 surge protective devices feature a high 200 kA SCCR. Replaceable arrestor modules are mechanically coded with the base to ensure against installing an incorrect replacement. The unique module locking system fixes the module to the base, and allows it to be easily replaced without tools by simply depressing the release buttons.(PDF 917 KB, 08/09/2021)
-
Technical specifications for the two-pole UL Type 4 component assembly SPD for use in Type 3 applications available in voltage ratings of 24Vac/dc, 48Vac/dc and 120Vac/dc.(PDF 1 MB, 08/09/2021)
-
Specifications and technical details on the Bussmann series BSPA surge protective device family of UL 1449 4th Edition Type 1 SPDs in NEMA 4X enclosures.(PDF 1 MB, 08/09/2021)
-
Specifications and technical details on the BSPD high capacity Type 1 and Type 2 SPDs for overvoltage protection on switchgear and power distribution panels. Wye systems 120/208V, 277/480V and 600V Wye, 240V, 480V and 600V Delta.(PDF 1 MB, 08/09/2021)
-
Technical Details on the DIN-Rail Mount RJ45/Ethernet Surge Protective Devices Data Sheet no. 2160(PDF 1 MB, 08/09/2021)
-
Technical specifications for the one-pole UL Type 4 component assembly SPD for use in Type 2 applications in voltage ratings of 48Vac/60Vdc, 75Vac/100Vdc, 120Vac/200Vdc, 320Vac/420Vdc, 385Vac/500Vdc, 440Vac/585Vdc and 600Vac/dc.(PDF 800 KB, 08/09/2021)
-
Technical Details on the Universal 4-Wire DIN-Rail Mount Surge Protective Device.(PDF 458 KB, 08/09/2021)
-
Technical details on the UL Listed, CSA Certified NEMA 4X SurgePOD PRO UL UL Type 1 1449 4th Edition surge protective devices(PDF 1 MB, 08/09/2021)
Warranty guides
-
Warranty coverage and coverage periods for Bussmann surge protective devices (SPDs).(PDF 621 KB, 08/09/2021)
Need product support?
Technical Support (Australia)
For technical support please visit:
http://www.eaton.com/au/en-gb/support/es-support.html
For technical support please visit:
http://www.eaton.com/au/en-gb/support/es-support.html
Technical Support (New Zealand)
For technical support please visit:
http://www.eaton.com/nz/en-gb/support/es-support.html
For technical support please visit:
http://www.eaton.com/nz/en-gb/support/es-support.html
How to buy from Eaton
- Products
- Electrical circuit protection
- Fuses and fuse holders
- Bussmann series UL Type 1 Surge Protective Devices
Eaton’s mission is to improve the quality of life and the environment through the use of power management technologies and services. We provide sustainable solutions that help our customers effectively manage electrical, hydraulic, and mechanical power – more safely, more efficiently, and more reliably. Eaton’s 2020 revenues were $17.9 billion, and we sell products to customers in more than 175 countries.
© 2021 Eaton. All rights reserved.
eatonBasePage.AreYouSure
eatonBasePage.AreYouSure