199000 Aperçu

Spécifications générales

Product Name	Eaton Rapid Link Speed controller
Catalog Number	199000
EAN	4015081970582
Product Length/Depth	157 mm
Product Height	270 mm
Product Width	220 mm
Product Weight	3.45 kg
Certifications	UL approval IEC/EN 61800-5-1 UL 61800-5-1 RoHS CE
Catalog Notes	3 fixed speeds and 1 potentiometer speed can be switched over from U/f to (vector) speed control Connection of supply voltage via adapter cable on round or flexible busbar junction Diagnostics and reset on the device and via PROFINET integrated PTC thermistor monitoring and Thermoclick with safe isolation optional: 4 sensor inputs with M12-Y adapter for switchover to creep speed optional: Faster stop if external 24 V fails Two sensor inputs through M12 sockets (max. 150 mA) for quick stop and interlocked manual operation with AUTO - OFF/RESET - HAND key switches with selector switch REV - OFF - FWD
Model Code	RASP5-5420PNT-4120100S1

Features & Functions

Features	Parameterization: Keypad Parameterization: Fieldbus Parameterization: drivesConnect mobile (App) Parameterization: drivesConnect
Fitted with:	IGBT inverter Key switch position HAND Key switch position AUTO Key switch position OFF/RESET PTC thermistor monitoring Control unit Thermo-click with safe isolation Braking resistance 2 Actuator outputs Breaking resistance Two sensor inputs through M12 sockets (max. 150 mA) for quick stop and interlocked manual operation Selector switch (Positions: REV - OFF - FWD) Internal DC link PC connection
Functions	Brake chopper with braking resistance for dynamic braking 1 potentiometer speed 4-quadrant operation possible 3 fixed speeds

General

Degree of protection	NEMA 12 IP65
Electromagnetic compatibility	1st and 2nd environments (according to EN 61800-3)
Overvoltage category	III
Product category	Speed controller
Protocol	PROFINET IO
Radio interference class	C2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary. C1: for conducted emissions only
Rated impulse withstand voltage (Uimp)	2000 V
System configuration type	Center-point earthed star network (TN-S network) AC voltage Phase-earthed AC supply systems are not permitted.

Ambient conditions, mechanical

Mounting position	Vertical
Shock resistance	15 g, Mechanical, According to IEC/EN 60068-2-27, 11 ms, Half-sinusoidal shock 11 ms, 1000 shocks per shaft
Vibration	Resistance: 57 Hz, Amplitude transition frequency on acceleration Resistance: 6 Hz, Amplitude 0.15 mm Resistance: 10 - 150 Hz, Oscillation frequency Resistance: According to IEC/EN 60068-2-6

Climatic environmental conditions

Altitude	Above 1000 m with 1 % performance reduction per 100 m Max. 2000 m
Ambient operating temperature - min	-10 °C
Ambient operating temperature - max	40 °C
Ambient storage temperature - min	-40 °C
Ambient storage temperature - max	70 °C
Climatic proofing	< 95 %, no condensation In accordance with IEC/EN 50178

Main circuit

Current limitation	0.5 - 5.6 A, motor, main circuit Adjustable, motor, main circuit
Delay time	< 10 ms, On-delay < 10 ms, Off-delay
Efficiency	98 % (η)
Input current ILN at 150% overload	5.3 A
Leakage current at ground IPE - max	3.5 mA
Mains current distortion	120 %
Mains switch-on frequency	Maximum of one time every 60 seconds
Mains voltage - min	380 V
Mains voltage - max	480 V
Mains voltage tolerance	380 - 480 V (-10 %/+10 %, at 50/60 Hz)
Operating mode	PM and LSPM motors Sensorless vector control (SLV) Synchronous reluctance motors U/f control BLDC motors
Output frequency - min	0 Hz
Output frequency - max	500 Hz
Overload current	At 40 °C For 60 s every 600 s
Overload current IL at 150% overload	8.4 A
Rated frequency - min	45 Hz
Rated frequency - max	66 Hz
Rated operational current (Ie)	5.6 A at 150% overload (at an operating frequency of 8 kHz and an ambient air temperature of +40 °C)
Rated operational power at 380/400 V, 50 Hz, 3-phase	2.2 kW
Rated operational voltage	400 V AC, 3-phase 480 V AC, 3-phase
Resolution	0.1 Hz (Frequency resolution, setpoint value)
Starting current - max	200 %, IH, max. starting current (High Overload), For 2 seconds every 20 seconds, Power section
Supply frequency	50/60 Hz
Switching frequency	8 kHz, 4 - 32 kHz adjustable, fPWM, Power section, Main circuit
System configuration type	Center-point earthed star network (TN-S network) AC voltage Phase-earthed AC supply systems are not permitted.

Motor rating

Assigned motor power at 460/480 V, 60 Hz, 3-phase

3 HP

Braking function

Braking current	≤ 0.6 A (max. 6 A for 120 ms), Actuator for external motor brake
Braking torque	Adjustable to 100 % (I/Ie), DC - Main circuit
Switch-on threshold for the braking transistor	765 VDC

Short-circuit rating

Rated conditional short-circuit current (Iq)	10 kA
Short-circuit protection (external output circuits)	Type 1 coordination via the power bus' feeder unit, Main circuit

Control circuit

Rated control voltage (Uc)

24 V DC (-15 %/+20 %, external via AS-Interface® plug)

Communication

Communication interface	PROFINET, optional
Connection	Plug type: HAN Q4/2
Interfaces	Max. total power consumption from AS-Interface® power supply unit (30 V): 250 mA Specification: S-7.4 (AS-Interface®) Number of slave addresses: 31 (AS-Interface®)

Cable

Cable length

C2 ≤ 5 m, maximum motor cable length
C3 ≤ 25 m, maximum motor cable length
C1 ≤ 1 m, maximum motor cable length

Design verification

10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

199000
Model Code: RASP5-5420PNT-4120100S1

Spécifications générales

Features & Functions

General

Ambient conditions, mechanical

Climatic environmental conditions

Main circuit

Motor rating

Braking function

Short-circuit rating

Control circuit

Communication

Cable

Design verification

Exporter les spécifications du produit

Brochures

Declarations of conformity

eCAD model

Guide utilisateur

Instructions d'installation

mCAD model

Schémas

Conçus pour fonctionner ensemble

199000 Model Code: RASP5-5420PNT-4120100S1

Spécifications générales

Features & Functions

General

Ambient conditions, mechanical

Climatic environmental conditions

Main circuit

Motor rating

Braking function

Short-circuit rating

Control circuit

Communication

Cable

Design verification

Exporter les spécifications du produit

Brochures

Declarations of conformity

eCAD model

Guide utilisateur

Instructions d'installation

mCAD model

Schémas

Conçus pour fonctionner ensemble

Partageons nos grandes idées

199000
Model Code: RASP5-5420PNT-4120100S1