169084

General specifications

Product Name	Eaton DA1 Variable frequency drive
Catalog Number	169084
EAN	4015081655700
Product Length/Depth	186 mm
Product Height	231 mm
Product Width	107 mm
Product Weight	1.8 kg
Certifications	EAC IEC/EN 61800-3 Safety: EN 61800-5-1: 2003 IEC/EN61800-3 UL 508C CE CSA-C22.2 No. 14 CUL RCM Specification for general requirements: IEC/EN 61800-2 UL Category Control No.: NMMS, NMMS7 UL UL report applies to both US and Canada IEC/EN61800-5 UkrSEPRO Certified by UL for use in Canada RoHS, ISO 9001 UL File No.: E172143
Catalog Notes	The brake resistors are assigned based on the maximum rated power of the variable frequency drive. Additional brake resistors and designs (e.g. different duty cycles) are available upon request.

Especificaciones del producto

Product Category	Variable frequency drives
Features	Parameterization: Fieldbus Parameterization: Keypad Parameterization: drivesConnect Parameterization: drivesConnect mobile (App)
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
Fitted with:	Control unit Radio interference suppression filter Additional PCB protection PC connection Breaking resistance Brake chopper 7-digital display assembly IGBT inverter Internal DC link
Climatic proofing	< 95 average relative humidity (RH), no condensation, no corrosion
Connection to SmartWire-DT	In conjunction with DX-NET-SWD1 SmartWire DT module Yes
Operating mode	Sensorless vector control (SLV) U/f control Optional: Vector control with feedback (CLV) Speed control with slip compensation
Frame size	2 FS2
Altitude	Max. 1000 m Max. 4000 m Above 1000 m with 1 % derating per 100 m
Environmental class	3C2, 3S2 (Air quality)
Application in domestic and commercial area permitted	Yes
Mains switch-on frequency	Maximum of one time every 30 seconds
Application in industrial area permitted	Yes
Ambient operating temperature - max	50 °C
Ambient operating temperature - min	-10 °C
Ambient operating temperature at 150% overload - max	50 °C
Ambient operating temperature at 150% overload - min	-10 °C
Ambient storage temperature - max	60 °C
Ambient storage temperature - min	-40 °C
Apparent power at 230 V	4.18 kVA
Apparent power at 240 V	4.36 kVA
Assigned motor current IM at 220 - 240 V, 60 Hz, 150% overload	9.6 A
Assigned motor current IM at 230 V, 50 Hz, 150% overload	8.7 A
Mounting position	Vertical
Relative symmetric net frequency tolerance	10 %
Relative symmetric net voltage tolerance	10 %
Protection	Finger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)
Resolution	0.1 Hz (Frequency resolution, setpoint value)
Static heat dissipation, non-current-dependent Pvs	0 W
Switch-on threshold for the braking transistor	390 VDC
Communication interface	OP-Bus (RS485), built in EtherCAT, optional SmartWire-DT, optional Ethernet IP, optional PROFINET, optional Modbus-TCP, optional Modbus RTU, built in CANopen®, built in DeviceNet, optional PROFIBUS, optional
Converter type	U converter
Degree of protection	IP20 NEMA Other
Protocol	CAN Other bus systems PROFINET IO PROFIBUS DeviceNet EtherNet/IP MODBUS TCP/IP
Assigned motor power at 230/240 V, 60 Hz, 1-phase	3 HP
System configuration type	AC supply systems with earthed center point
Electromagnetic compatibility	1st and 2nd environments (according to EN 61800-3)
Braking resistance	35 Ω
Equipment heat dissipation, current-dependent Pvid	103.4 W
Heat dissipation capacity Pdiss	0 W
Heat dissipation per pole, current-dependent Pvid	0 W
Input current ILN at 150% overload	19.2 A
Braking torque	Max. 100 % of rated operational current Ie with external braking resistor - Main circuit Max. 30 % MN, Standard - Main circuit Max. 100 % of rated operational current Ie, variable, DC - Main circuit
Cable length	C3 ≤ 25 m, Radio interference level, maximum motor cable length C2 ≤ 5 m, Radio interference level, maximum motor cable length 200 m, screened, with motor choke, maximum permissible, Motor feeder 100 m, screened, maximum permissible, Motor feeder 150 m, unscreened, maximum permissible, Motor feeder 300 m, unscreened, with motor choke, maximum permissible, Motor feeder C1 ≤ 1 m, Radio interference level, maximum motor cable length
Functions	4-quadrant operation possible
Output voltage (U2)	230 V AC, 3-phase 240 V AC, 3-phase
Number of inputs (analog)	2
Number of inputs (digital)	5
Radio interference class	C1: for conducted emissions only Optional external radio interference suppression filter for longer motor cable lengths and for use in different EMC environments C2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary.
Number of outputs (digital)	2
Starting current - max	200 %, IH, max. starting current (High Overload), for 4 seconds every 40 seconds, Power section
Number of phases (input)	1
Number of relay outputs	2 (parameterizable, 1 N/O and 1 changeover contact, 6 A (250 V, AC-1) / 5 A (30 V, DC-1))
Number of phases (output)	3
Power consumption	103.4 W
Rated control supply voltage	10 V DC (Us, max. 10 mA)
Efficiency	95.3 % (η)
Rated control voltage (Uc)	24 V DC (external, max. 100 mA)
Supply frequency	50/60 Hz
Leakage current at ground IPE - max	2.49 mA
Mains voltage - max	240 V
Mains voltage - min	200 V
Nominal output current I2N	10.5 A
Number of HW-interfaces (industrial ethernet)	0
Number of HW-interfaces (other)	0
Number of HW-interfaces (parallel)	0
Number of HW-interfaces (RS-232)	0
Number of HW-interfaces (RS-422)	0
Number of HW-interfaces (RS-485)	1
Number of HW-interfaces (serial TTY)	0
Number of HW-interfaces (USB)	0
Number of interfaces (PROFINET)	0
Number of outputs (analog)	2
Output at linear load at rated output voltage - max	2.2 kW
Output at quadratic load at rated output voltage - max	2.2 kW
Output frequency - max	500 Hz
Output frequency - min	0 Hz
Output voltage - max	250 V
Overload current IL at 150% overload	15.75 A
Suitable for	Branch circuits, (UL/CSA)
Switching frequency	16 kHz, 4 - 32 kHz adjustable (audible), fPWM, Power section, Main circuit
Rated operational voltage	230 V AC, 1-phase 240 V AC, 1-phase
Short-circuit protection rating	25 A, UL (Class CC or J), Safety device (fuse or miniature circuit-breaker), Power Wiring
Rated frequency - max	62 Hz
Rated frequency - min	48 Hz
Rated operational current (Ie) at 150% overload	10.5 A
Rated operational current for specified heat dissipation (In)	10.5 A
Rated operational power at 220/230 V, 50 Hz, 1-phase	2.2 kW
Safety function/level	STO (Safe Torque Off, SIL2, PLc Cat 2)
Heat dissipation at current/speed	101 W at 100% current and 0% speed 119 W at 100% current and 50% speed 139 W at 100% current and 90% speed 44 W at 25% current and 0% speed 54 W at 50% current and 0% speed 62 W at 25% current and 50% speed 78 W at 50% current and 50% speed 80 W at 50% current and 90% speed

Designed to work together

Discover other Eaton products and accessories built to enhance this product.

General specifications

Especificaciones del producto

Exportar especificación del producto

Declarations of conformity

Dibujos

eCAD model

Folletos

Instrucciones de instalación

Manuales y guías de uso

mCAD model

Videos de instalación

Designed to work together

169084

General specifications

Especificaciones del producto

Exportar especificación del producto

Declarations of conformity

Dibujos

eCAD model

Folletos

Instrucciones de instalación

Manuales y guías de uso

mCAD model

Videos de instalación

Designed to work together

HABLEMOS SOBRE TEMAS DE GRAN IMPACTO