Eaton DA1 Variable frequency drive, 400 V AC, 3-phase, 14 A, 5.5 kW, IP66/NEMA 4X, Radio interference suppression filter, OLED display, Local controls
| Product Name |
Eaton DA1 Variable frequency drive
|
| Catalog Number |
169387
|
| EAN |
4015081658305
|
| Product Length/Depth |
266.3 mm
|
| Product Height |
310 mm
|
| Product Width |
211 mm
|
| Product Weight |
7.3 kg
|
| Certifications |
CUL
IEC/EN61800-3 UL UL File No.: E172143 IEC/EN 61800-3 Certified by UL for use in Canada IEC/EN61800-5 CSA-C22.2 No. 14 Specification for general requirements: IEC/EN 61800-2 RCM UkrSEPRO UL Category Control No.: NMMS, NMMS7 UL 508C RoHS, ISO 9001 UL report applies to both US and Canada CE Safety: EN 61800-5-1: 2003 EAC |
| Catalog Notes |
The brake resistors are assigned based on the maximum rated power of the variable frequency drive. Additional brake resistors and designs (e.g. different duty cycles) are available upon request.
|
| Product Category |
Variable frequency drives
|
| Features |
Parameterization: drivesConnect
Parameterization: drivesConnect mobile (App) Parameterization: Fieldbus Parameterization: Keypad |
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| Fitted with: |
Local controls
PC connection IGBT inverter Additional PCB protection Control unit Radio interference suppression filter OLED display Internal DC link Breaking resistance Brake chopper |
| Climatic proofing |
< 95 average relative humidity (RH), no condensation, no corrosion
|
| Connection to SmartWire-DT |
No
|
| Operating mode |
Speed control with slip compensation
Optional: Vector control with feedback (CLV) Sensorless vector control (SLV) U/f control |
| Frame size |
FS3
|
| Altitude |
Above 1000 m with 1 % derating per 100 m
Max. 4000 m Max. 1000 m |
| Environmental class |
3C2, 3S2 (Air quality)
|
| Application in domestic and commercial area permitted |
Yes
|
| Mains switch-on frequency |
Maximum of one time every 30 seconds
|
| Application in industrial area permitted |
Yes
|
| Ambient operating temperature - max |
40 °C
|
| Ambient operating temperature - min |
-10 °C
|
| Ambient operating temperature at 150% overload - max |
40 °C
|
| Ambient operating temperature at 150% overload - min |
-10 °C
|
| Ambient storage temperature - max |
60 °C
|
| Ambient storage temperature - min |
-40 °C
|
| Apparent power at 400 V |
9.67 kVA
|
| Apparent power at 480 V |
11.64 kVA
|
| Assigned motor current IM at 400 V, 50 Hz, 150% overload |
11.3 A
|
| Mounting position |
Vertical
|
| Relative symmetric net frequency tolerance |
10 %
|
| Relative symmetric net voltage tolerance |
10 %
|
| Protection |
Finger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)
|
| Resolution |
0.1 Hz (Frequency resolution, setpoint value)
|
| Static heat dissipation, non-current-dependent Pvs |
0 W
|
| Switch-on threshold for the braking transistor |
780 VDC
|
| Voltage rating - max |
480 VAC
|
| Communication interface |
EtherCAT, optional
CANopen®, built in OP-Bus (RS485), built in Modbus-TCP, optional PROFINET, optional Modbus RTU, built in Ethernet IP, optional DeviceNet, optional PROFIBUS, optional |
| Converter type |
U converter
|
| Degree of protection |
IP66
NEMA 4X |
| Protocol |
Other bus systems
CAN MODBUS PROFINET IO EtherNet/IP PROFIBUS DeviceNet TCP/IP |
| Assigned motor current IM at 440 - 480 V, 60 Hz, 150% overload |
14 A
|
| System configuration type |
AC supply systems with earthed center point
|
| Electromagnetic compatibility |
1st and 2nd environments (according to EN 61800-3)
|
| Assigned motor power at 460/480 V, 60 Hz, 3-phase |
10 HP
|
| Braking resistance |
75 Ω
|
| Equipment heat dissipation, current-dependent Pvid |
209 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
0 W
|
| Input current ILN at 150% overload |
17.2 A
|
| Braking torque |
Max. 100 % of rated operational current Ie with external braking resistor - Main circuit
Max. 30 % MN, Standard - Main circuit Max. 100 % of rated operational current Ie, variable, DC - Main circuit |
| Cable length |
150 m, unscreened, maximum permissible, Motor feeder
C2 ≤ 5 m, Radio interference level, maximum motor cable length 100 m, screened, maximum permissible, Motor feeder C3 ≤ 25 m, Radio interference level, maximum motor cable length 300 m, unscreened, with motor choke, maximum permissible, Motor feeder 200 m, screened, with motor choke, maximum permissible, Motor feeder |
| Functions |
4-quadrant operation possible
|
| Output voltage (U2) |
400 V AC, 3-phase
480 V AC, 3-phase |
| Number of inputs (analog) |
2
|
| Number of inputs (digital) |
5
|
| Radio interference class |
C2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary.
|
| Number of outputs (digital) |
2
|
| Starting current - max |
200 %, IH, max. starting current (High Overload), for 4 seconds every 40 seconds, Power section
|
| Number of phases (input) |
3
|
| Number of relay outputs |
2 (parameterizable, 1 N/O and 1 changeover contact, 6 A (250 V, AC-1) / 5 A (30 V, DC-1))
|
| Number of phases (output) |
3
|
| Power consumption |
209 W
|
| Rated control supply voltage |
10 V DC (Us, max. 10 mA)
|
| Efficiency |
96.2 % (η)
|
| Rated control voltage (Uc) |
24 V DC (external, max. 100 mA)
|
| Supply frequency |
50/60 Hz
|
| Leakage current at ground IPE - max |
1.55 mA
|
| Mains voltage - max |
480 V
|
| Mains voltage - min |
380 V
|
| Nominal output current I2N |
14 A
|
| Number of HW-interfaces (industrial ethernet) |
0
|
| Number of HW-interfaces (other) |
0
|
| Number of HW-interfaces (parallel) |
0
|
| Number of HW-interfaces (RS-232) |
0
|
| Number of HW-interfaces (RS-422) |
0
|
| Number of HW-interfaces (RS-485) |
1
|
| Number of HW-interfaces (serial TTY) |
0
|
| Number of HW-interfaces (USB) |
0
|
| Number of interfaces (PROFINET) |
0
|
| Number of outputs (analog) |
2
|
| Output at linear load at rated output voltage - max |
5.5 kW
|
| Output at quadratic load at rated output voltage - max |
5.5 kW
|
| Output frequency - max |
500 Hz
|
| Output frequency - min |
0 Hz
|
| Output voltage - max |
500 V
|
| Overload current IL at 150% overload |
21 A
|
| Suitable for |
Branch circuits, (UL/CSA)
|
| Switching frequency |
8 kHz, 4 - 24 kHz adjustable (audible), fPWM, Power section, Main circuit
|
| Rated operational voltage |
480 V AC, 3-phase
400 V AC, 3-phase |
| Short-circuit protection rating |
25 A, UL (Class CC or J), Safety device (fuse or miniature circuit-breaker), Power Wiring
|
| Rated frequency - max |
62 Hz
|
| Rated frequency - min |
48 Hz
|
| Rated operational current (Ie) at 150% overload |
14 A
|
| Rated operational current for specified heat dissipation (In) |
14 A
|
| Rated operational power at 380/400 V, 50 Hz, 3-phase |
5.5 kW
|
| Safety function/level |
STO (Safe Torque Off, SIL2, PLc Cat 2)
|
| Heat dissipation at current/speed |
106 W at 50% current and 50% speed
114 W at 100% current and 0% speed 126 W at 50% current and 90% speed 153 W at 100% current and 50% speed 192 W at 100% current and 90% speed 74 W at 25% current and 0% speed 89 W at 25% current and 50% speed 90 W at 50% current and 0% speed |
Enviar correo electrónico
Especificaciones del producto
