199388

General specifications

Product Name	Eaton DC1 Variable frequency drive
Catalog Number	199388
EAN	4015081977772
Product Length/Depth	162 mm
Product Height	232 mm
Product Width	161 mm
Product Weight	2.5 kg
Certifications	CUL EAC CE UkrSEPRO UL File No.: E172143 CE marking IEC/EN 61800-2 IEC/EN 61800-3 UL 508C IEC/EN 61800-5-1 UL Category Control No.: NMMS, NMMS7 UL UL Listed UL report applies to both US and Canada RCM CSA-C22.2 No. 14 IEC/EN61800-5 RoHS, ISO 9001 Certified by UL for use in Canada

Especificaciones del producto

Features	Parameterization: Fieldbus Parameterization: drivesConnect Parameterization: Keypad Parameterization: drivesConnect mobile (App)
Fitted with:	Local controls UV resistance 7-digital display assembly PC connection Radio interference suppression filter Control unit Additional PCB protection IGBT inverter Internal DC link
Climatic proofing	< 95 average relative humidity (RH), no condensation, no corrosion
Connection to SmartWire-DT	No
Operating mode	U/f control PM motors Sensorless vector control (SLV) BLDC motors Synchronous reluctance motors Speed control with slip compensation
Frame size	FS1
Altitude	Max. 4000 m Above 1000 m with 1 % derating per 100 m
Application in domestic and commercial area permitted	Yes
Mains switch-on frequency	Maximum of one time every 30 seconds
Ambient operating temperature - max	40 °C
Ambient operating temperature - min	-20 °C
Mains voltage - max	240 V
Output voltage - max	250 V
Relative symmetric net frequency tolerance	10 %
Relative symmetric net voltage tolerance	10 %
Ambient storage temperature - max	60 °C
Ambient storage temperature - min	-40 °C
Apparent power at 230 V	0.99 kVA
Apparent power at 240 V	1.03 kVA
Application in industrial area permitted	Yes
Product category	Variable frequency drives
Protection	Finger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)
Resolution	0.1 Hz (Frequency resolution, setpoint value)
Voltage rating - max	240 V
Mounting position	Vertical
Communication interface	CANopen®, built in OP-Bus (RS485), built in SmartWire-DT, optional Modbus RTU, built in
Converter type	U converter
Degree of protection	NEMA 4X IP66
Assigned motor power at 230/240 V, 60 Hz, 1-phase	0.5 HP
Input current ILN at 150% overload	6 A
Assigned motor current IM at 220 - 240 V, 60 Hz, 150% overload	4.3 A
Assigned motor current IM at 230 V, 50 Hz, 150% overload	4.3 A
Protocol	EtherNet/IP MODBUS CAN Other bus systems
Overload current IL at 150% overload	6.45 A
Rated frequency - max	62 Hz
Rated frequency - min	48 Hz
Rated operational power at 220/230 V, 50 Hz, 1-phase	0.37 kW
System configuration type	AC supply systems with earthed center point
Electromagnetic compatibility	1st and 2nd environments (according to EN 61800-3)
Braking torque	Max. 100 % of rated operational current Ie, variable, DC - Main circuit
Cable length	75 m, unscreened, maximum permissible, Motor feeder 50 m, screened, maximum permissible, Motor feeder C3 ≤ 25 m, maximum motor cable length 150 m, unscreened, with motor choke, maximum permissible, Motor feeder C1 ≤ 1 m, maximum motor cable length C2 ≤ 5 m, maximum motor cable length 100 m, screened, with motor choke, maximum permissible, Motor feeder
Output voltage (U2)	230 V AC, single-phase 240 V AC, single-phase
Number of inputs (analog)	2
Number of inputs (digital)	4
Radio interference class	C1: for conducted emissions only Optional external radio interference suppression filter for longer motor cable lengths and for use in different EMC environments C2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary.
Number of outputs (digital)	1
Starting current - max	175 % IH
Number of phases (input)	1
Number of relay outputs	1 (parameterizable, N/O, 6 A (250 V, AC-1) / 5 A (30 V, DC-1))
Number of phases (output)	1
Power consumption	45.75 W
Rated control supply voltage	10 V DC (Us, max. 10 mA)
Efficiency	97 % (η)
Supply frequency	50/60 Hz
Leakage current at ground IPE - max	2.49 mA
Mains voltage - min	200 V
Nominal output current I2N	4.3 A
Number of HW-interfaces (industrial ethernet)	0
Number of HW-interfaces (other)	0
Number of HW-interfaces (parallel)	0
Number of HW-interfaces (RS-232)	0
Number of HW-interfaces (RS-422)	0
Number of HW-interfaces (RS-485)	1
Number of HW-interfaces (serial TTY)	0
Number of HW-interfaces (USB)	0
Number of interfaces (PROFINET)	0
Number of outputs (analog)	1
Output at linear load at rated output voltage - max	0.37 kW
Output at quadratic load at rated output voltage - max	0.37 kW
Output frequency - max	500 Hz
Output frequency - min	0 Hz
Suitable for	Branch circuits, (UL/CSA)
Switching frequency	8 kHz, 4 - 32 kHz adjustable (audible), fPWM, Power section, Main circuit
Rated operational current (Ie)	4.3 A at 150% overload (at an operating frequency of 6 kHz and an ambient air temperature of +40 °C)
Rated operational voltage	230 V AC, 1-phase 240 V AC, 1-phase
Short-circuit protection rating	10 A, UL (Class CC or J), Safety device (fuse or miniature circuit-breaker), Power Wiring

General specifications

Especificaciones del producto

Exportar especificación del producto

Declarations of conformity

Dibujos

Folletos

Instrucciones de instalación

Manuales y guías de uso

mCAD model

Notas de aplicación

Videos de instalación

Designed to work together

199388

General specifications

Especificaciones del producto

Exportar especificación del producto

Declarations of conformity

Dibujos

Folletos

Instrucciones de instalación

Manuales y guías de uso

mCAD model

Notas de aplicación

Videos de instalación

Designed to work together

HABLEMOS SOBRE TEMAS DE GRAN IMPACTO