Download document () of 20
Send email
Download
You have exceeded the download limit
Eaton Moeller® series M22 Bulkhead interface, 0.6 m, Prefabricated cable with permanently connected USB 3.0 Type A plug, Bezel: titanium
| Product Name |
Eaton Moeller® series M22 Accessory Bulkhead interface
|
| Catalog Number |
107412
|
| EAN |
4015081071500
|
| Product Length/Depth |
120 mm
|
| Product Height |
30 mm
|
| Product Width |
120 mm
|
| Product Weight |
0.043 kg
|
| Compliances |
CE Marked
|
| Certifications |
UL 508
CSA Std. C22.2 No. 142 IEC 6113-2 CE UL Category Control No.: DUXR, DUXR7 UL Certified by UL for use in Canada IEC/EN 6113-2 UL File No.: E330994 UL report applies to both US and Canada CSA-C22.2 No. 142 CSA Class No.: none |
| Catalog Notes |
Prefabricated cable with permanently connected USB 3.0 Type A plug
|
| Model Code |
M22-USB-SA
|
| Bezel color |
Titanium
|
| Design |
USB 3.0 A
|
| Material |
Titanium front ring
|
| Number of poles |
Nine-pole
|
| Accessories |
Connection cable
|
| Accessory/spare part type |
Accessory
|
| Degree of protection |
IP20 (with plug connected)
IP65 (with closed cover) NEMA 12 (with closed cover) |
| Lifespan, mechanical |
100 insertion cycles
|
| Limit value class |
3
|
| Mounting depth |
70 mm
|
| Opening diameter |
22.5 mm
|
| Ambient operating temperature - min |
-20 °C
|
| Ambient operating temperature - max |
70 °C
|
| Ambient storage temperature - min |
25 °C
|
| Ambient storage temperature - max |
80 °C
|
| Insulation resistance |
≥ 100 MΩ
|
| Nominal current |
900 A
|
| Nominal voltage - max |
30 V
|
| Rated operational voltage |
5 V AC/DC
|
| Resistance |
< 30 mΩ (volume resistance)
|
| Connection to SmartWire-DT |
No
|
| Data transfer rate |
5 GBit/s, max.
|
| Contact material |
CuSn, gold-plated
|
| Contact type |
1:1
|
| Force for positive opening - min |
0 N
|
| Cable length |
0.6 m
|
| Cable sheath material |
Polyvinyl chloride (PVC)
|
| Outer cable diameter |
6.1 mm
|
| Permitted bending radius |
15 x cable diameter
|
| Heat dissipation capacity Pdiss |
0 W
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Please enquire
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Product specifications
