Eaton DC1 Variable frequency drive, 230 V AC, 1-phase, 10.5 A, 1.1 kW, IP66/NEMA 4X, Radio interference suppression filter, Brake chopper, 7-digital display assembly, Additional PCB protection, UV resistant, FS2
| Product Name |
Eaton DC1 Variable frequency drive
|
| Catalog Number |
199391
|
| EAN |
4015081977802
|
| Product Length/Depth |
182 mm
|
| Product Height |
257 mm
|
| Product Width |
188 mm
|
| Product Weight |
3.5 kg
|
| Certifications |
UL File No.: E172143
IEC/EN 61800-5-1 EAC UL Listed UL 508C UL Category Control No.: NMMS, NMMS7 IEC/EN 61800-3 Certified by UL for use in Canada UL report applies to both US and Canada CE RCM CUL IEC/EN61800-5 RoHS, ISO 9001 CE marking UL UkrSEPRO IEC/EN 61800-2 CSA-C22.2 No. 14 |
| Model Code |
DC1-S2011FB-A66OE1
|
| Features |
Parameterization: drivesConnect
Parameterization: Fieldbus Parameterization: drivesConnect mobile (App) Parameterization: Keypad |
| Fitted with: |
Brake chopper
Radio interference suppression filter IGBT inverter Internal DC link UV resistance Control unit 7-digital display assembly Additional PCB protection Breaking resistance PC connection |
| Functions |
4-quadrant operation possible
|
| Cable length |
300 m, unscreened, with motor choke, maximum permissible, Motor feeder
C3 ≤ 25 m, maximum motor cable length C2 ≤ 5 m, maximum motor cable length 100 m, screened, maximum permissible cable length 200 m, screened, with motor choke, maximum permissible cable length 150 m, unscreened, maximum permissible cable length C1 ≤ 1 m, maximum motor cable length |
| Communication interface |
CANopen®, built in
OP-Bus (RS485), built in Modbus RTU, built in SmartWire-DT, optional |
| Connection to SmartWire-DT |
No
|
| Degree of protection |
IP66
NEMA 4X |
| Electromagnetic compatibility |
1st and 2nd environments (according to EN 61800-3)
|
| Frame size |
FS2
|
| Mounting position |
Vertical
|
| Product category |
Variable frequency drives
|
| Protection |
Finger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)
|
| Protocol |
EtherNet/IP
CAN MODBUS Other bus systems |
| Radio interference class |
C1: for conducted emissions only
C2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary. Optional external radio interference suppression filter for longer motor cable lengths and for use in different EMC environments |
| Suitable for |
Branch circuits, (UL/CSA)
|
| Altitude |
Above 1000 m with 1 % derating per 100 m
Max. 4000 m |
| Ambient operating temperature - min |
-20 °C
|
| Ambient operating temperature - max |
40 °C
|
| Ambient storage temperature - min |
-40 °C
|
| Ambient storage temperature - max |
60 °C
|
| Climatic proofing |
< 95 average relative humidity (RH), no condensation, no corrosion
|
| Efficiency |
97 % (η)
|
| Input current ILN at 150% overload |
14 A
|
| Leakage current at ground IPE - max |
2.49 mA
|
| Mains switch-on frequency |
Maximum of one time every 30 seconds
|
| Mains voltage - min |
200 V
|
| Mains voltage - max |
240 V
|
| Operating mode |
Speed control with slip compensation
BLDC motors U/f control Synchronous reluctance motors PM motors Sensorless vector control (SLV) |
| Output frequency - min |
0 Hz
|
| Output frequency - max |
500 Hz
|
| Output voltage (U2) |
230 V AC, single-phase
240 V AC, single-phase |
| Overload current IL at 150% overload |
15.75 A
|
| Rated control supply voltage |
10 V DC (Us, max. 10 mA)
|
| Rated frequency - min |
48 Hz
|
| Rated frequency - max |
62 Hz
|
| Rated operational current (Ie) |
10.5 A at 150% overload (at an operating frequency of 6 kHz and an ambient air temperature of +40 °C)
|
| Rated operational voltage |
230 V AC, 1-phase
240 V AC, 1-phase |
| Resolution |
0.1 Hz (Frequency resolution, setpoint value)
|
| Short-circuit protection rating |
25 A, UL (Class CC or J), Safety device (fuse or miniature circuit-breaker), Power Wiring
|
| Starting current - max |
175 % IH
|
| Supply frequency |
50/60 Hz
|
| Switching frequency |
8 kHz, 4 - 32 kHz adjustable (audible), fPWM, Power section, Main circuit
|
| System configuration type |
AC supply systems with earthed center point
|
| Voltage rating - max |
240 V
|
| Assigned motor current IM at 220 - 240 V, 60 Hz, 150% overload |
9.6 A
|
| Assigned motor current IM at 230 V, 50 Hz, 150% overload |
10.5 A
|
| Assigned motor power at 230/240 V, 60 Hz, 1-phase |
1.5 HP
|
| Apparent power at 230 V |
2.42 kVA
|
| Apparent power at 240 V |
2.52 kVA
|
| Braking resistance |
100 Ω
|
| Braking torque |
Max. 100 % of rated operational current Ie with external braking resistor - Main circuit
Max. 100 % of rated operational current Ie, variable, DC - Main circuit |
| Switch-on threshold for the braking transistor |
390 VDC
|
| Number of inputs (analog) |
2
|
| Number of inputs (digital) |
4
|
| Number of outputs (analog) |
1
|
| Number of outputs (digital) |
1
|
| Number of relay outputs |
1 (parameterizable, N/O, 6 A (250 V, AC-1) / 5 A (30 V, DC-1))
|
Send email
Product specifications
