Download document () of 20
Send email
Download
You have exceeded the download limit
Eaton Moeller® series EMS2 Reversing starter, 24 V DC, 0,18 - 3 A, Push in terminals, Controlled stop, PTB 19 ATEX 3000
| Product Name |
Eaton Moeller® series EMS2 Reversing starter
|
| Catalog Number |
192394
|
| EAN |
4015081930913
|
| Product Length/Depth |
114.5 mm
|
| Product Height |
99 mm
|
| Product Width |
22.5 mm
|
| Product Weight |
0.287 kg
|
| Certifications |
IEC/EN 60947-4-2
EN ISO 13849 IEC 61508 UL508 UL File No.: E338590 UL Category Control No.: NLDX, NLDX7 PTB 19 ATEX 3000 UL 60947-4-1 CSA-C22.2 No. 60947-4-1-14 CE marking UL listed Certified by UL for use in Canada UL report applies to both US and Canada |
| Functions |
Motor protection
DOL starting Reversing start Temperature compensated overload protection Controlled stop |
| Class |
CLASS 10
|
| Connection to SmartWire-DT |
No
|
| Degree of protection |
IP20
NEMA Other |
| Model |
Reversing starter
|
| Mounting method |
Rail mounting possible
Top-hat rail fixing (according to IEC/EN 60715, 35 mm) |
| Mounting position |
Motor feeder at bottom
Vertical |
| Overload release current setting - min |
0.18 A
|
| Overload release current setting - max |
3 A
|
| Product category |
Electronic motor starter
|
| Residual ripple |
≤ 5 % (input voltage)
|
| Terminal capacity |
0.2 - 2.5 mm², Main cables, Push-in terminals
0.2 - 2.5 mm², Main cables 0.14 - 2.5 mm², Control circuit cables |
| Terminal capacity (AWG) |
24 - 14, Main cables, Push-in terminals
26 - 14, Control circuit cables 24 - 14, Main cables |
| Type |
Reversing starter (complete device)
|
| Voltage type |
DC
|
| Ambient operating temperature - min |
-25 °C
|
| Ambient operating temperature - max |
70 °C
|
| Ambient storage temperature - min |
40 °C
|
| Ambient storage temperature - max |
80 °C
|
| Radio interference class |
EN 55011
Class A (EN 61000-6-3, emitted interference, radiated) |
| Rated actuating current (Ic) |
5 mA
|
| Rated conditional short-circuit current (Iq), type 2, 380 V, 400 V, 415 V |
0 A
|
| Rated control supply current Is |
40 mA
|
| Rated control supply voltage |
19.2 - 30 V DC
|
| Rated control voltage (Uc) |
24 V (Actuating circuit ON, L, R)
|
| Rated control supply voltage (Us) at AC, 50 Hz - min |
0 V
|
| Rated control supply voltage (Us) at AC, 50 Hz - max |
0 V
|
| Rated control supply voltage (Us) at AC, 60 Hz - min |
0 V
|
| Rated control supply voltage (Us) at AC, 60 Hz - max |
0 V
|
| Rated control supply voltage (Us) at DC - min |
24 V
|
| Rated control supply voltage (Us) at DC - max |
24 V
|
| Rated operational current (Ie) |
3 A
|
| Rated operational current (Ie) at AC-15, 220 V, 230 V, 240 V |
2 A
|
| Rated operational current (Ie) at AC-3, 380 V, 400 V, 415 V |
3 A
|
| Rated operational current (Ie) at AC-51 |
3 A
|
| Rated operational current (Ie) at AC-53A - max |
3 A
|
| Rated operational current (Ie) at DC-13, 24 V |
2 A
|
| Rated operational power at AC-3, 220/230 V, 50 Hz |
0.55 kW
|
| Rated operational power at AC-3, 380/400 V, 50 Hz |
1.1 kW
|
| Rated operational power at AC-53A, 380/400 V, 50 Hz |
1.1 kW
|
| Rated operational voltage |
42 - 550 V
500 V AC |
| Switching level |
19.2 - 30 V DC, Switching level "High", Actuating circuit (ON, L, R)
-3 - 9.6 V DC, Switching level "Low", Actuating circuit (ON, L, R) < 5 V DC, Switching level "confirm Off", Actuating circuit (ON, L, R) |
| Number of auxiliary contacts (normally closed contacts) |
1
|
| Number of auxiliary contacts (normally open contacts) |
1
|
| Number of contacts (change-over contacts) |
1
|
| Explosion safety category for dust |
ATEX dust-ex-protection, II (2) G [Ex e] [Ex d] [Ex px]
ATEX dust-ex-protection, II (2) D [Ex t] [Ex p] |
| Safety parameter (EN ISO 13849-1) |
3 (safe switch off), Category
PL e, Performance level (safe switch off) 60 (safe switch off) / 70 (motor protection) years; MTTFD |
| Safety parameter (IEC 62061) |
99 %, SFF
PFHd [FIT]: 2.3 (Safe switch off) SIL 3 (Safe switch off) / SIL 2 (Motor protection) 99 % (safe switch off) / 98 % (motor protection), DC Λdu [FIT]: 2.3 (Safe switch off) / 11 (Motor protection) Λsd [FIT]: 0 Λsu [FIT]: 1072 (Safe switch off) / 969 (Motor protection) Λdd [FIT]: 580 (Safe switch off) / 601 (Motor protection) Opening delay [ms]: 200 (safe switch off) / Class 10 (motor protection) |
| Equipment heat dissipation, current-dependent Pvid |
2.5 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
0 W
|
| Rated operational current for specified heat dissipation (In) |
3 A
|
| Static heat dissipation, non-current-dependent Pvs |
2 W
|
| Heat dissipation details |
If necessary, Allow for derating
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Product specifications
