Download document () of 20
Send email
Download
You have exceeded the download limit
Eaton DX Sine filter, three-phase, 500 V + 0% (50/60 Hz) V AC, 110 A, For use with: DA1, DG1
| Product Name |
Eaton DX All-pole sine filter
|
| Catalog Number |
197529
|
| EAN |
4015081941322
|
| Product Length/Depth |
280 mm
|
| Product Height |
280 mm
|
| Product Width |
506 mm
|
| Product Weight |
80 kg
|
| Compliances |
CE
|
| Certifications |
IEC 61558-1
IEC/EN 61558-2-20-2000 UL 508 CSA-C22.2 No. 14 UL File No.: E219022 UL Category Control No.: NMTR CSA File No.: UL report applies to both US and Canada |
| Number of phases |
3
|
| Accessory/spare part type |
Filter
|
| Product Category |
Accessories
|
| Used with |
DG1
DA1 |
| Ambient operating temperature - max |
45 °C
|
| Ambient operating temperature - min |
-10 °C
|
| Permissible connection voltage |
Max. 500 V AC (5 - 150 Hz)
|
| Rated inductance |
0.4 mH
|
| Equipment heat dissipation, current-dependent Pvid |
890 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Rated operational current for specified heat dissipation (In) |
110 A
|
| Static heat dissipation, non-current-dependent Pvs |
0 W
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Product specifications
