The Crouse-Hinds series FHM fixture hanger with locking plug is used for mounting industrial LED and HID type light fixtures in non-hazardous locations.
Meets UL and NEMA requirements for the listed electrical ratings
Design features
Power hook housing has two 3/4” through feed hubs and one 3/4” hub on the top for pendant mounting; through feed hubs are furnished with flush plugs
Cast mounting lugs are provided for direct ceiling mounting
Housing contains a roomy 15 cu. in. splicing chamber and interlocking type receptacle with leads
Plugs and receptacles are interlocking to prevent accidental disengagement. When plug is inserted, hook is blocked and luminaire assembly cannot be removed. To service the luminaire, pull the plug, unhook the loop luminaire assembly, and take it to a convenient servicing area
Loop can move a maximum of 30°, allowing the power hook to be mounted on a canted ceiling; the luminaire assembly will hang true to the vertical
Loop and hook are shaped for selfalignment and resist twisting of luminaire by gusts of wind or light drafts
Supporting loop is furnished with 16” of #16-3/C Type SO cord and an interlocking type plug
Standard materials
Power hook body – copper-free aluminum
Access cover – zinc plated cold rolled steel
Loop – copper-free aluminum
Specifications
SKU-Level data coming soon!
Complete product technical specifications and catalog number information, along with other related downloads, can be accessed in the resources section of this page.
Send email
