Download document () of 20
Send email
Download
You have exceeded the download limit
Eaton Moeller® series CI-K Insulated enclosure, HxWxD=120x80x95mm, +mounting rail CI-K1H-95-TS
| Product Name |
Eaton Moeller® series CI-K Insulated enclosure
|
| Catalog Number |
105853
|
| EAN |
4015081056309
|
| Model Code |
CI-K1H-95-TS
|
| Product Length/Depth |
95 mm
|
| Product Height |
137 mm
|
| Product Width |
80 mm
|
| Product Weight |
0.169 kg
|
| Certifications |
UL94: HB
IEC/EN 60529 DIN EN 62208 IEC 60068-2-11 UL94: VO/1.5 mm thickness |
| Catalog Notes |
Lamp indicator L‐… can be mounted in base knock-out M20/M25
|
| Enclosure color |
Light gray, Operator (RAL 7035)
Light gray, Cover (RAL 7035) Black (RAL 9005) |
| Enclosure material |
Plastic
1 Ω x 10¹³ (Surface resistance to IEC 60093) |
| Features |
UV resistance beneath protective shield
Halogen free |
| Fitted with: |
Mounting rail to IEC/EN 60715
|
| Knockouts |
Hard knockout version
Metric cable entry knockouts at the top, bottom and back plate |
| Cover material |
Glass-fiber reinforced polycarbonate
|
| Degree of protection |
IP65
NEMA Other |
| Degree of protection (front side) |
IP65
|
| Dielectric strength |
30 kV/mm, according to IEC 60243-1
|
| Flammability characteristics |
960 °C/1 mm thickness (base, cover; glow wire to VDE 0471 Part 2)
650 °C/1 mm thick (push-through membrane and seal material) to VDE 0471 Part 2) |
| Model |
Surface mounting
|
| Mounting depth |
72 mm
|
| Mounting weight capacity - max |
0.5 kg
|
| Product category |
|
| Surface treatment |
Resistant to corrosion
|
| Track resistance |
CTI 175 (cover, to IEC 60112)
CTI 175 (base, to IEC 60112) |
| Type |
Basic enclosure
|
| Water consumption |
0.29 % (According to DIN EN ISO 62)
|
| Environmental resistance |
Partly resistant to alcohol
Not resistant to Mineral oil Resistant against alkalis Not resistant to alkalis Not resistant to benzene Resistant against alcohol Resistant against salt solutions Partly resistant to greases Resistant against gasoline Partly resistant to acids (> 10%) Partly resistant to benzene Resistant against greases Chemical resistant (Base, Cover) Resistant against acids (< 10%) Resistant against mineral oil Resistant against benzene Chemical resistant (Push-through membrane (CI-K1/CI-K2) and sealing material) |
| Impact resistance |
IK04 (according to EN 50102)
|
| Temperature resistance |
-40 - 80 °C (gasket)
-40 - 120 °C (enclosure) |
| Ambient operating temperature - min |
-25 °C
|
| Ambient operating temperature - max |
70 °C
|
| Climatic proofing |
Damp heat, cyclic, to IEC 60068-2-30
Damp heat, constant, to IEC 60068-2-78 |
| Radiated heat dissipation with separate mounting |
10 W (at an ambient temperature of 20 °C)
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Please enquire
|
| 10.2.5 Lifting |
Not applicable.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Meets the product standard's requirements.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Product specifications
