Download document () of 20
Send email
Download
You have exceeded the download limit
IZMX16N3-P08W. Circuit-breaker 3p, 800A, withdrawable
| Product Name |
Eaton Moeller series IZMX/INX circuit-breaker
|
| Catalog Number |
123132
|
| EAN |
4015081207374
|
| Model Code |
IZMX16N3-P08W
|
| Product Length/Depth |
584 mm
|
| Product Height |
597 mm
|
| Product Width |
521 mm
|
| Product Weight |
27.74 kg
|
| Compliances |
IEC/EN 60947
IEC |
| Type |
|
| Frame |
IZMX16
|
| Number of poles |
Three-pole
|
| Amperage Rating |
800 A
|
| Release system |
Electronic release
|
| Voltage rating at AC |
690 V AC
|
| Rated insulation voltage (Ui) |
1000 V
|
| Rated impulse withstand voltage (Uimp) |
12 kV AC
|
| Rated uninterrupted current (Iu) |
800 A
|
| Rated uninterrupted current (Iu) at 50°C |
800 A
|
| Rated uninterrupted current (Iu) at 60°C |
800 A
|
| Rated uninterrupted current (Iu) at 70°C |
800 A
|
| Rated short-time withstand current (t = 1 s) |
42 kA
|
| Overload release current setting - min |
400 A
|
| Overload release current setting - max |
800 A
|
| Short-circuit release delayed setting - min |
800 A
|
| Short-circuit release delayed setting - max |
8000 A
|
| Short-circuit release non-delayed setting |
2 - 10 x Ir
|
| Short-circuit release non-delayed setting - min |
0 A
|
| Short-circuit release non-delayed setting - max |
9600 A
|
| Adjustment range short-term delayed short-circuit release - min |
1600 A
|
| Adjustment range short-term delayed short-circuit release - max |
8000 A
|
| Adjustment range undelayed short-circuit release - min |
1600 A
|
| Adjustment range undelayed short-circuit release - max |
9600 A
|
| Rated short-circuit breaking capacity at 400 V, 50 Hz |
50 kA
|
| Rated short-circuit making capacity up to 440 V, 50/60 Hz |
105 kA
|
| Rated short-circuit making capacity up to 690 V, 50/60 Hz |
88 kA
|
| Power of withdrawable switch with cassette |
80 W
|
| Closing delay via spring release |
30 ms
|
| Electrical connection type of main circuit |
Rail connection
|
| Number of standard mechanical operations per hour - max |
60
|
| Operating sequence up to 690 V, 50/60 Hz (IEC/EN 60947) |
42 kA
|
| Utilization category |
B
|
| Overvoltage category |
III
|
| Pollution degree |
3
|
| Direction of incoming supply |
As required
|
| Lifespan, electrical |
10000 operations (switching capacity)
10000 operations (switching cycles ON/OFF, with maintenance) |
| Device construction |
Built-in device slide-in technique
|
| Mounting Method |
Withdrawable
|
| Degree of protection |
IP20
IP41 with door sealing frame IP55 with protective cover |
| Protection |
Professional protection
|
| Number of auxiliary contacts (change-over contacts) |
2
|
| Number of auxiliary contacts (normally closed contacts) |
0
|
| Number of auxiliary contacts (normally open contacts) |
0
|
| Position of connection for main current circuit |
Back side
|
| Weight of cassette version (3-pole) |
18 kg
|
| Weight of cassette version (4-pole) |
21 kg
|
| Weight of fixed withdrawable version (3-pole) |
28 kg
|
| Weight of fixed withdrawable version (4-pole) |
33 kg
|
| Actuator type |
Push button
|
| Terminal capacity (copper bar) |
5 mm x 50 mm (2x) for withdrawable units (black)
5 mm x 50 mm (2x) for fixed mounting (black) |
| Lifespan, mechanical |
12500 switching cycles (ON/OFF)
20000 operations (switching capacity, with maintenance) |
| Rated operational current for specified heat dissipation (In) |
800 A
|
| Equipment heat dissipation, current-dependent |
80 W
|
| Ambient operating temperature details |
Device with LCD-display -20 °C - 70 °C
|
| Ambient operating temperature - min |
-25 °C
|
| Ambient operating temperature - max |
70 °C
|
| Ambient storage temperature - min |
-25 °C
|
| Ambient storage temperature - max |
70 °C
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
| Features |
Motor drive optional
|
| Fitted with: |
Switched-off indicator
|
| Special features |
|
| Suitable for |
Main conducting paths with 23 kA in IT electrical power networks up to U = 440 V
|
| Used with |
Air circuit breakers/switch-disconnector
Open circuit breaker |
Product specifications
