Download document () of 20
Send email
Download
You have exceeded the download limit
Eaton Moeller® series M22 LED element, Flat Rear, green, front mounting, High Performance
| Product Name |
Eaton Moeller® series M22 Accessory LED
|
| Catalog Number |
197143
|
| EAN |
4015080895244
|
| Model Code |
M22-FLED-G-HP
|
| Product Length/Depth |
37.8 mm
|
| Product Height |
14.4 mm
|
| Product Width |
10 mm
|
| Product Weight |
0.004 kg
|
| Certifications |
CSA
UL UL Category Control No.: NKCR CSA Class No.: 3211-03 IEC/EN 60947-5 UL 508 CSA File No.: 012528 CSA-C22.2 No. 94-91 IEC 60947-5-1 CE CSA-C22.2 No. 14-05 UL File No.: E29184 |
| Fitted with: |
Light source
Diode |
| Light color |
Green
|
| Degree of protection |
IP20
|
| Lifespan, electrical |
100,000 h (at 25°C, according to EN60064)
|
| Overvoltage category |
III
|
| Pollution degree |
3
|
| Rated impulse withstand voltage (Uimp) |
4000 V AC
|
| Voltage type |
AC/DC
|
| Mounting position |
As required
|
| Shock resistance |
50 g, Mechanical, according to IEC/EN 60068-2-27, Half-Sinusoidal shock 11 ms
|
| Ambient operating temperature - min |
-25 °C
|
| Ambient operating temperature - max |
70 °C
|
| Ambient storage temperature - min |
-40 °C
|
| Ambient storage temperature - max |
85 °C
|
| Climatic proofing |
Dry heat to IEC 60068-2-2
Damp heat, cyclic, to IEC 60068-2-30 Damp heat, constant, to IEC 60068-2-78 |
| Radiated RFI |
10 V (IEC/EN 61131-2:2008, Level 3)
|
| Radio interference class |
Class A (EN 55011)
|
| Terminal capacity (flexible with ferrule) |
Use WAGO Variocrimp 4 crimping tool; please enquire for others
1 x (0.25 - 1) mm² |
| Terminal capacity (solid) |
1 x (075 - 1.5) mm² Can be plugged without tools
1 x (0.2 - 1.5) mm² |
| Terminal capacity (stranded) |
1 x (0.2 - 1.5) mm²
|
| Power consumption |
Max. 0.55 W
|
| Rated insulation voltage (Ui) |
250 V
|
| Rated operational current (Ie) - min |
10 mA
|
| Rated operational current (Ie) - max |
23 mA
|
| Rated operational voltage (Ue) at AC - max |
0 V
|
| Rated operational voltage (Ue) at AC - min |
0 V
|
| Rated operational voltage (Ue) at DC - max |
30 V
|
| Rated operational voltage (Ue) at DC - min |
18 V
|
| Connection to SmartWire-DT |
No
|
| Force for positive opening - min |
0 N
|
| Equipment heat dissipation, current-dependent Pvid |
0 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
0 W
|
| Rated operational current for specified heat dissipation (In) |
0 A
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Product specifications
