1319814

Eaton QM Switch-disconnector, QM, 80 A, 6 pole, without rotary handle, With drive shaft, 6 mm square

產品規格

產品諮詢

規格資源

常用規格

Product Name	Eaton QM Switch-disconnector
Catalog Number	1319814
Product Length/Depth	125 mm
Product Height	90 mm
Product Width	125 mm
Product Weight	1.6 kg
Certifications	IEC/EN 60947-3 VDE 0660 IEC/EN 60204 RoHS CE IEC/EN 60947

特色 & 功能

Fitted with:	Drive shaft
Functions	Optional Stop Function
Number of poles	Six-pole

一般

Accessories	Auxiliary contact or neutral conductor fitted by user.
Actuator type	Other
Degree of protection	NEMA Other
Degree of protection (front side)	IP20
Mounting method	Top-hat rail mounting Rear mounting
Mounting position	As required
Overvoltage category	III
Pollution degree	3
Product Category	Main switch Switch-disconnector
Rated impulse withstand voltage (Uimp)	6000 V
Safety parameter (EN ISO 13849-1)	B10d values as per EN ISO 13849-1, table C.1

天候環境狀況

Ambient operating temperature - min	-25 °C
Ambient operating temperature - max	55 °C
Ambient storage temperature - min	-30 °C
Ambient storage temperature - max	80 °C

端子容量

Terminal capacity	1 x (10 - 50) mm², solid 1 x (10 - 35) mm², flexible
Stripping length (main cable)	14 mm
Stripping length (main cable)	14 mm
Tightening torque	3 Nm, Screw terminals

電力額定值

Rated conditional short-circuit current (Iq)	15 kA
Rated insulation voltage (Ui)	690 V
Rated operational power at AC-23A, 400 V, 50 Hz	37 kW
Rated operational power at AC-3, 380/400 V, 50 Hz	30 kW
Rated operational voltage (Ue) at AC - max	690 V
Rated uninterrupted current (Iu)	80 A
Uninterrupted current	Rated uninterrupted current Iu is specified for max. cross-section.

接點

Number of auxiliary contacts (normally closed contacts)	0
Number of auxiliary contacts (normally open contacts)	0

設計驗證

Equipment heat dissipation, current-dependent Pvid	0 W
Heat dissipation capacity Pdiss	0 W
Heat dissipation per pole, current-dependent Pvid	8 W
Rated operational current for specified heat dissipation (In)	80 A
Static heat dissipation, non-current-dependent Pvs	0 W
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.