197566

Eaton DB1 Variable frequency drive, 400 V AC, 3-phase, 9.5 A, 4 kW, IP20/NEMA 0, Radio interference suppression filter, FS2

產品規格

產品諮詢

規格資源

常用規格

Product Name	Eaton DB1 Variable frequency drive
Catalog Number	197566
Product Length/Depth	89 mm
Product Height	193 mm
Product Width	140 mm
Product Weight	1.15 kg
Certifications	UL File No.: E172143 IEC/EN 61800-2 IEC/EN61800-5 Safety: EN 61800-5-1: 2003 CSA-C22.2 No. 14 CUL UL 508C UL report applies to both US and Canada RCM IEC/EN61800-3 UL Category Control No.: NMMS, NMMS7 Certified by UL for use in Canada IEC/EN 61800-3 RoHS, ISO 9001 CE UL CSA-C22.2 No. 274 IEC/EN 61800-5-1 CE marking
Catalog Notes	The brake resistors are assigned based on the maximum rated power of the variable frequency drive. Additional brake resistors and designs (e.g. different duty cycles) are available upon request.

特色 & 功能

Features	Tool-less swapping of fan Temperature-controlled fan Parameterization: Fieldbus Parameterization: Keypad Parameterization: drivesConnect Parameterization: drivesConnect mobile (App)
Fitted with:	Internal DC link Radio interference suppression filter IGBT inverter Breaking resistance PC connection Additional PCB protection

一般

Cable length	C1 ≤ 1 m, maximum motor cable length C2 ≤ 3 m, maximum motor cable length C3 ≤ 10 m, maximum motor cable length 10 m, screened, maximum permissible cable length
Communication interface	OP-Bus (RS485) Modbus RTU CANopen®
Connection to SmartWire-DT	No
Degree of protection	IP20 NEMA Other
Electromagnetic compatibility	1st and 2nd environments (according to EN 61800-3)
Frame size	FS2
Number of slots	1 (expansion)
Product Category	Variable frequency drives
Protection	Finger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)
Protocol	CAN MODBUS Other bus systems
Radio interference class	C1: for conducted emissions only C2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary.
Suitable for	Branch circuits, (UL/CSA)

環境條件，機械

Mounting position	As required Depending on the cooling
Shock resistance	15 g, Mechanical, According to IEC/EN 60068-2-27, 11 ms
Vibration	Resistance: According to EN 61800-5-1

天候環境狀況

Altitude	Max. 2000 m Max. 1000 m Above 1000 m with 1 % derating per 100 m
Ambient operating temperature - min	-10 °C
Ambient operating temperature - max	50 °C
Ambient operating temperature at 150% overload - min	-10 °C
Ambient operating temperature at 150% overload - max	60 °C
Ambient storage temperature - min	-40 °C
Ambient storage temperature - max	60 °C
Climatic proofing	< 95 average relative humidity (RH), no condensation, no corrosion

主電路

Efficiency	97 % (η)
Input current ILN at 150% overload	10.7 A
Leakage current at ground IPE - max	3.5 mA (at 3 x 400 V)
Mains switch-on frequency	Maximum of one time every 30 seconds
Mains voltage - min	380 V
Mains voltage - max	480 V
Operating mode	U/f control Speed control with slip compensation BLDC motors PM motors Sensorless vector control (SLV) Synchronous reluctance motors
Output frequency - min	0 Hz
Output frequency - max	500 Hz
Output voltage (U2)	400 V AC, 3-phase 480 V AC, 3-phase
Overload current IL at 150% overload	14.25 A
Rated control supply voltage	10 V DC (Us, max. 10 mA)
Rated frequency - min	48 Hz
Rated frequency - max	62 Hz
Rated operational current (Ie) at 150% overload	9.5 A
Rated operational power at 380/400 V, 50 Hz	4 kW
Rated operational voltage	400 V AC, 3-phase 480 V AC, 3-phase
Resolution	0.1 Hz (Frequency resolution, setpoint value)
Short-circuit protection rating	15 A, UL (Class CC or J), Safety device (fuse or miniature circuit-breaker), Power Wiring
Starting current - max	175 %, IH, max. starting current (High Overload), For 3.75 seconds every 600 seconds, Power section
Supply frequency	50/60 Hz
Switching frequency	8 kHz, 4 - 32 kHz adjustable (audible), fPWM, Power section, Main circuit
System configuration type	AC supply systems with earthed center point
Voltage rating - max	480 VAC

馬達額定值

Assigned motor current IM at 400 V, 50 Hz, 150% overload	9.5 A
Assigned motor current IM at 440 - 480 V, 60 Hz, 150% overload	9.5 A
Assigned motor power at 460/480 V, 60 Hz	5 HP

視在功率

Apparent power at 400 V	3.8 kVA
Apparent power at 480 V	4.56 kVA

控制電路

Number of inputs (analog)	2
Number of inputs (digital)	4
Number of outputs (analog)	1
Number of outputs (digital)	1
Number of relay outputs	1 (parameterizable, N/O, 6 A (250 V, AC-1) / 5 A (30 V, DC-1))
Rated control voltage (Uc)	24 V DC (external, max. 100 mA)

設計驗證

Heat dissipation capacity Pdiss	0 W
Heat dissipation per pole, current-dependent Pvid	0 W
Rated operational current for specified heat dissipation (In)	9.5 A
Static heat dissipation, non-current-dependent Pvs	0 W
10.2.2 Corrosion resistance	Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects	Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard's requirements.
10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions	Meets the product standard's requirements.
10.3 Degree of protection of assemblies	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard's requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder's responsibility.
10.8 Connections for external conductors	Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength	Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage	Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material	Is the panel builder's responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.