Eaton Moeller® series DILMF Contactors for Semiconductor Industries acc. to SEMI F47, 380 V 400 V: 80 A, RAC 120: 100 - 120 V 50/60 Hz, Screw terminals
| Product Name |
Eaton Moeller® series DILMF contactor for semiconductor industries
|
| Catalog Number |
104472
|
| EAN |
4015081042890
|
| Product Length/Depth |
160 mm
|
| Product Height |
170 mm
|
| Product Width |
90 mm
|
| Product Weight |
2.26 kg
|
| Certifications |
CE
CSA-C22.2 No. 60947-4-1-14 CSA Class No.: 2411-03, 3211-04 UL UL File No.: E29096 UL Category Control No.: NLDX CSA File No.: 012528 CSA IEC/EN 60947-4-1 UL 60947-4-1 |
| Catalog Notes |
Also tested according to AC-3e.
|
| Model Code |
DILMF80(RAC120)
|
| Fitted with: |
Built-in suppressor circuit
|
| Number of poles |
Three-pole
|
| Number of poles |
Three-pole
|
| Number of poles |
Three-pole
|
| Application |
Contactors for Semiconductor Industries acc. to SEMI F47
|
| Connection |
Screw terminals
|
| Product category |
Contactors
|
| Resistance per pole |
0.56 mΩ
|
| Suitable for |
SEMI F47, Magnet systems
Also motors with efficiency class IE3 |
| Utilization category |
AC-4: Normal AC induction motors: starting, plugging, reversing, inching
AC-3: Normal AC induction motors: starting, switch off during running AC-1: Non-inductive or slightly inductive loads, resistance furnaces |
| Voltage type |
AC
|
| Altitude |
Max. 2000 m
|
| Ambient operating temperature - min |
-25 °C
|
| Ambient operating temperature - max |
60 °C
|
| Emitted interference |
According to EN 60947-1
|
| Interference immunity |
According to EN 60947-1
|
| Rated operational current (Ie) at AC-1, 380 V, 400 V, 415 V |
90 A
|
| Rated operational current (Ie) at AC-3, 220 V, 230 V, 240 V |
80 A
|
| Rated operational current (Ie) at AC-3, 380 V, 400 V, 415 V |
80 A
|
| Rated operational current (Ie) at AC-3, 440 V |
80 A
|
| Rated operational current (Ie) at AC-3, 500 V |
80 A
|
| Rated operational current (Ie) at AC-3, 660 V, 690 V |
65 A
|
| Rated operational current (Ie) at AC-4, 220 V, 230 V, 240 V |
40 A
|
| Rated operational current (Ie) at AC-4, 440 V |
40 A
|
| Rated operational current (Ie) at AC-4, 500 V |
40 A
|
| Rated operational current (Ie) at AC-4, 660 V, 690 V |
27 A
|
| Rated operational power at AC-3, 240 V, 50 Hz |
27.5 kW
|
| Rated operational power at AC-3, 380/400 V, 50 Hz |
37 kW
|
| Rated operational power at AC-3, 415 V, 50 Hz |
48 kW
|
| Rated operational power at AC-3, 440 V, 50 Hz |
51 kW
|
| Rated operational power at AC-3, 500 V, 50 Hz |
58 kW
|
| Rated operational power at AC-3, 690 V, 50 Hz |
63 kW
|
| Rated operational power at AC-4, 220/230 V, 50 Hz |
11.5 kW
|
| Rated operational power at AC-4, 240 V, 50 Hz |
13 kW
|
| Rated operational power at AC-4, 415 V, 50 Hz |
24 kW
|
| Rated operational power at AC-4, 440 V, 50 Hz |
25 kW
|
| Rated operational power at AC-4, 500 V, 50 Hz |
29 kW
|
| Rated operational power at AC-4, 660/690 V, 50 Hz |
26 kW
|
| Short-circuit current rating (basic rating) |
10 kA, 600 A max. fuse, SCCR (UL/CSA)
10 kA, 600 A max. CB, SCCR (UL/CSA) |
| Short-circuit current rating (high fault at 480 V) |
100 kA, 300 A CLASS J max. fuse, SCCR (UL/CSA)
30 kA, 600 A max. fuse, SCCR (UL/CSA) 65 kA, 250 A max. CB, SCCR (UL/CSA) |
| Short-circuit current rating (high fault at 600 V) |
100 kA, 300 A CLASS J max. fuse, SCCR (UL/CSA)
30 kA, 600 A max. fuse, SCCR (UL/CSA) |
| Conventional thermal current Ith (1-pole, enclosed) |
200 A
|
| Conventional thermal current Ith (3-pole, enclosed) |
80 A
|
| Conventional thermal current Ith at 60°C (3-pole, open) |
90 A
|
| Conventional thermal current Ith of main contacts (1-pole, open) |
225 A
|
| Switching capacity (main contacts, general use) |
125 A, Maximum motor rating (UL/CSA)
|
| Drop-out voltage |
AC operated: 0.5 - 0.2 x UC, AC operated
|
| Duty factor |
100 %
|
| Pick-up voltage |
0.8 - 1.15 V AC x Uc
|
| Power consumption, pick-up, 50 Hz |
75 VA, Dual-frequency coil in a cold state and 1.0 x Us, at 50 Hz
|
| Power consumption, sealing, 50 Hz |
2 VA, Dual-frequency coil in a cold state and 1.0 x Us, at 50 Hz
2 W, Dual-frequency coil in a cold state and 1.0 x Us, at 50 Hz |
| Rated control supply voltage (Us) at AC, 50 Hz - min |
100 V
|
| Rated control supply voltage (Us) at AC, 50 Hz - max |
120 V
|
| Rated control supply voltage (Us) at AC, 60 Hz - min |
100 V
|
| Rated control supply voltage (Us) at AC, 60 Hz - max |
120 V
|
| Rated control supply voltage (Us) at DC - min |
0 V
|
| Rated control supply voltage (Us) at DC - max |
0 V
|
| Switching time (AC operated, make contacts, closing delay) - max |
55 ms
|
| Switching time (AC operated, make contacts, opening delay) - max |
40 ms
|
| Assigned motor power at 115/120 V, 60 Hz, 1-phase |
7.5 HP
|
| Assigned motor power at 200/208 V, 60 Hz, 3-phase |
25 HP
|
| Assigned motor power at 230/240 V, 60 Hz, 1-phase |
15 HP
|
| Assigned motor power at 230/240 V, 60 Hz, 3-phase |
30 HP
|
| Assigned motor power at 460/480 V, 60 Hz, 3-phase |
60 HP
|
| Assigned motor power at 575/600 V, 60 Hz, 3-phase |
75 HP
|
| Number of auxiliary contacts (normally closed contacts) |
0
|
| Number of auxiliary contacts (normally open contacts) |
0
|
| Number of contacts (normally closed) as main contact |
0
|
| Special purpose rating of ballast electrical discharge lamps |
100 A (600V 60Hz 3phase, 347V 60Hz 1phase)
100 A (480V 60Hz 3phase, 277V 60Hz 1phase) |
| Special purpose rating of definite purpose rating |
480 A, LRA 480 V 60 Hz 3-ph, 100,000 cycles acc. to UL 1995, (UL/CSA)
80 A, FLA 480 V 60 Hz 3-ph, 100,000 cycles acc. to UL 1995, (UL/CSA) |
| Special purpose rating of elevator control |
20 HP, 200 V 60 Hz 3-ph, (UL/CSA)
65 A, 480 V 60 Hz 3-ph, (UL/CSA) 62.1 A, 200 V 60 Hz 3-ph, (UL/CSA) 25 HP, 240 V 60 Hz 3-ph, (UL/CSA) 50 HP, 480 V 60 Hz 3-ph, (UL/CSA) 62 A, 600 V 60 Hz 3-ph, (UL/CSA) 68 A, 240 V 60 Hz 3-ph, (UL/CSA) 60 HP, 600 V 60 Hz 3-ph, (UL/CSA) |
| Special purpose rating of refrigeration control (CSA only) |
90 A, FLA 480 V 60 Hz 3phase; (CSA)
540 A, LRA 480 V 60 Hz 3phase; (CSA) 70 A, FLA 600 V 60 Hz 3phase; (CSA) 420 A, LRA 600 V 60 Hz 3phase; (CSA) |
| Special purpose rating of resistance air heating |
100 A, 600 V 60 Hz 3phase, 347 V 60 Hz 1phase, (UL/CSA)
100 A, 480 V 60 Hz 3phase, 277 V 60 Hz 1phase, (UL/CSA) |
| Special purpose rating of tungsten incandescent lamps |
100 A, 480 V 60 Hz 3phase, 277 V 60 Hz 1phase, (UL/CSA)
100 A, 600 V 60 Hz 3phase, 347 V 60 Hz 1phase, (UL/CSA) |
| Equipment heat dissipation, current-dependent Pvid |
9 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
3 W
|
| Rated operational current for specified heat dissipation (In) |
80 A
|
| Static heat dissipation, non-current-dependent Pvs |
2 W
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Saada email
Toote tehnilised andmed
